Planning Data Sheet

DATA SHEET
24" Single DishDrawer™ Tall
2 9/16"
B
22 9/16"
0 5 10 20
inches
18 1/16"
21 3/4"
A
FRONT VIEW
PLAN VIEW
PROFILE VIEW
e
c
DATUM : FRONT OF CARCASS
DATUM : FRONT OF CARCASS
DATUM : BOTTOM OF PRODUCT
CLEARANCE :
CORNER CUPBOARD
CLEARANCE :
CORNER CUPBOARD
g
n
m
n
h
f
i
j
d
l
k
Model no:
DD24SDFTX9_N
(refer page 2 for metric measurements)
Dimensions
in
a Overall height of DishDrawer™
18 1/16"
B Overall width of DishDrawer™
2 9/16"
c Overall depth of DishDrawer™ (excluding handle)
22 9/16"
D Height of chassis
17 7/8"
e Depth of chassis
21 /4"
f Depth of front panel
1 /16"
g Height of front panel
18 1/2"
h Height from chassis to top of drawer panel
1"
i Height of ventilation gap below front panel
5/16"
j Thickness of handle
5/8"
k Height from center of handle to top of front panel
2 1/16"
l Depth of handle
1 5/8"
m Width of handle
22 1/4"
n Maximum extension of drawer from drawer front (excluding
handle)
20 /4"
Minimum Clearances
in
Minimum inside height of cavity
18 7/8"
Minimum inside width of cavity
2 5/8"
Minimum inside depth of cavity from front datum
22 1/16"
Minimum clearance from a corner cupboard
1/2"
Note: Service outlet at rear extends both sides, hoses and cords can be routed
to either or both.
INDICATES CABINETRY / PRODUCT DATUM -------------------------
INDICATES CABINETRY CLEARANCES --------------------------------
DATE: 28.05.2018
IMPORTANT NOTE: Throughout this guide, dimensions may vary by ±2mm (1/16'').
Please read the installation manual for detailed information on installing the
product. For full installation instructions & specifications visit fisherpaykel.com