DUAL INSTALLATION INSTRUCTIONS Framed and Frameless Cabinetry ActiveSmart™ Integrated Door Drawer Refrigerator RS36W80 models US CA www.fisherpaykel.com www.dcsappliances.com 845689 A 08.
1 2 SAFETY AND WARNINGS ! DUAL INSTALLATION Dual installation refers to the joining of 1 x RS36W80R model with 1 x RS36W80L model. WARNING! This appliance is top-heavy and must be secured to prevent the possibility of tipping forward. To ensure that the appliance is stable under all loading conditions, the anti-tip bracket and fittings supplied must be installed according to the following installation instructions by a professional installer.
3 COMPONENTS LIST Included with the Dual Install kit (24641).
4 5 ALCOVE DIMENSIONS ATTACHING FOAM PADS 1 Measure and attach foam pads to three locations down the right side of the left hinge product. (Align the top of the foam pad to your measurement mark. Align the side of the foam pad with the front edge of the cabinet). B ●● ●● ●● 2” (50mm) from the cabinet top. 35” (890mm) from the cabinet top. 13” (50mm) from the floor. Repeat on the left side of the right hinge product.
REMOVING HINGE BRACKET AND FITTING ALCOVE BRACKET We have recommended starting with the left hinge product, then repeating the process on the right hinge product. Removing hinge bracket The following steps show how to remove the hinge bracket (non hinged side) and fit the alcove bracket. This process is required on both left hinge and right hinge products. Fitting alcove bracket 4 Screw the front two M5 x 8 countersunk Phillips screws (refer to C).
ATTACHING TOP JOINER BRACKET AND ALCOVE FIXING BRACKET TO ALCOVE 1 Use M5 x 12 Socket head cap screws to connect the top joiner bracket to the alcove fixing bracket. – For 80” installation, use the upper slots of the alcove fixing bracket (refer to A). – For 84” installation, use the lower slots of the alcove fixing bracket (refer to B). 3 For flush installation measure 4 1/4” (108mm) back from the front face of the adjacent cabinetry doors (refer to C).
LOCATION OF PRODUCTS INTO ALCOVE — RIGHT PRODUCT 1 Roll the right hinge product into the right hand side of the alcove until the product makes contact with the joiner bracket. IMPORTANT! For flush installation: check for flushness of the product with the surrounding cabinetry (refer to separate ‘Installation instructions’ booklet supplied with your appliance) on how to achieve flushness.
LOCATION OF PRODUCTS INTO ALCOVE — LEFT PRODUCT IMPORTANT! 2 Open the left hinge product door to access the brackets (refer to B). Open the door of the right hinge product. 3 Adjust the product height (as per the separate ‘Installation instructions’ booklet supplied 1 Roll the left hinge product into the left hand side of the alcove until the product makes contact with the joiner bracket (refer to A).
!0 PREPARING FOR CENTER TRIM 1 Remove the center* M10 x 65 Socket head cap screws from the base of the products (refer to A) *Remove the right screw from the left hinge product. *Remove the left screw from the right hinge product. 5 Insert right hand spring clip into the center trim channel (refer to C). IMPORTANT! Ensure the bottom of the right hand spring clip is located on the right hand side of the channel. 2 Attach the bottom joiner bracket using M10 x 65 Socket head cap screws (refer to B).
!1 ATTACHING THE CENTER TRIM AND TOE KICK IMPORTANT! 6 Installing toe kick Unscrew the toe kick bracket screws mid-way, and bring forward (refer to D and E). Open both refrigerator doors. Repeat this process for both products. 1 Bring the center trim in front of the gap between the two products (refer to A). D A E 7 Place toe kick over the brackets and position the outer brackets until flush with surrounding cabinetry.
www.fisherpaykel.com www.dcsappliances.com © Fisher & Paykel Appliances 2016. All rights reserved. The product specifications in this booklet apply to the specific products and models described at the date of issue. Under our policy of continuous product improvement, these specifications may change at any time. You should therefore check with your Dealer to ensure this booklet correctly describes the product currently available. US CA 845689 A 08.