FIC, Cavalry Series Pocket PC 2003 User Guide
Prefix COPYRIGHT © FIC All rights reserved. Disclaimer: FIC shall not be liable for any technical or editorial errors or omissions contained herein; or for incidental or consequential damages resulting from furnishing this material, or the performance or use of this product. FIC reserves the right to change product specifications without notice. Information in this document may change without notice.
CONTENTS PREFIX Copyright Using This Guide Where To Find Additional Information CONTENTS 1. INTRODUCTION 1.1 Welcome 1.2 Summary of Features 1.3 Safety Instructions 1.3.1 Power Cord Set Requirements 1.3.2 Interference 1.4 Caring For Your Pocket PC 1.4.1 Routine Care 1.4.2 AC Adapter Care 1.4.3 Display Care 1.4.4 Care While Traveling 2. GETTING STARTED 2.1 Unpacking the Box 2.2 Product Overview 2.3 Power 2.3.1 Using Battery Power 2.3.2 Using Mains Power 2.3.2.1 Direct Mains Connection 2.3.
2.4.3 Turning Your Pocket PC Off 2.5 Quick Start 3. EXPLORING YOUR POCKET PC 3.1 Basic Operation 3.1.1 3.1.2 3.1.3 3.1.4 The Operating System 3.1.1.1 The Navigation Bar 3.1.1.2 The Command Bar 3.1.1.3 Launching and Switching Between Programs Navigation 3.1.2.1 Using the Stylus 3.1.2.2 Using the Navigation Button 3.1.2.3 Using the Rock Switch 3.1.2.4 Using the Programmable Application Buttons Entering Data 3.1.3.1 Using the Input Panel to Enter Typed Text 3.1.3.
3.4.3 3.4.2.1 Viewing Received Messages 3.4.2.2 Composing and Sending Messages MSN Messenger 3.4.3.1 Managing Contacts 3.4.3.2 Chatting 3.5 Productivity Software 3.5.1 3.5.2 Pocket Word 3.5.1.1 Typing Mode 3.5.1.2 Writing Mode 3.5.1.3 Drawing Mode 3.5.1.4 Recording Mode Pocket Excel 3.5.2.1 Tips for Working in Pocket Excel 3.6 Pictures 4. CONNECTING 4.1 Connecting to a PC 4.1.1 Connecting Via the USB Cable 4.1.2 Connecting Via the USB Cradle 4.1.3 4.1.2.
4.3.3 Setting Up a Remote Connection Using an Bluetooth Card 4.3.4 Synchronizing Information With Your Server 4.3.5 Synchronizing Links To Web Sites 5. CONFIGURING AND OPTIMIZING YOUR POCKET PC 5.1 Managing Power 5.2 Managing Memory 5.3 Removing Programs 5.4 Configuring the Menus 5.5 Configuring the Buttons 5.6 Adjusting Settings 5.6.1 Screen 5.6.2 Sounds 5.6.3 Clock 5.6.4 Owner Information 5.6.5 Password 5.6.6 Today Screen 5.6.7 Backlight 6. TROUBLESHOOTING 6.
1. Introduction 1.1 WELCOME Congratulations on purchasing your new Pocket PC. You now have the convenience and flexibility of a full-featured personal digital assistant, enabling you to control your schedule and stay on top of your work wherever you go. Powered by Microsoft® Pocket PC 2003 Premium Edition, your Pocket PC offers a host of functions designed to make your life easier. 1.
4. Do not use the product near water. Never spill liquid of any kind on the product. 5. Do not place the product on an unstable surface. 6. Do not expose the product to a heat source or leave it in direct sunlight for a prolonged period of time. 7. The product should be operated from the type of power supply indicated on the label. If you are unsure of the type of power supply available, consult your dealer or local power company. 8. Do not allow anything to rest on the power cord.
1.4 CARING FOR YOUR POCKET PC 1.4.1 Routine Care To keep your Pocket PC working properly, please follow these guidelines. • Do not attempt to disassemble or modify the product. • Never place anything on top of the product. • Avoid using or storing the product in places where static electricity or electrical noise is likely to be present. • Avoid using or storing the product in direct sunlight, or in places that are subject to extreme temperatures or sudden changes in temperature.
1.4.4 Care While Traveling • Safeguard your data by making a backup copy. • Turn the power off and disconnect all external devices. • Take the included AC adapter along with you. • Pack the product in a protective case and carry it in your hand luggage. • Avoid exposing the product to magnetic security devices. • To avoid radio interference, do not use the product on an airplane.
2. Getting Started 2.1 UNPACKING THE BOX Start by preparing a suitable workspace to unpack the box and set up your Pocket PC. Select a place that is located close to an electrical outlet, making sure that the surface is stable, level and clean. Open the box carefully, ensuring that you do not damage the box or any of the other packing materials. The box will be required if you ever have to store or ship your Pocket PC.
communications Top view of the Pocket PC 5) Left Side View of Pocket PC 11 Stylus – pull to remove 6) Voice Recorder – press and hold to start recording sound via the microphone. Release to stop.
8) Microphone 9) LED – Left: battery charging indicator (flashing red – battery fast charging / continuous green – battery 80% full and trickle charging ) Middle: Alarm(red light) Right: WiFi(option) 10) Power Button 11) Touch Screen 12) 4 Programmable Application Buttons – can be set to launch applications quickly. Default settings (left to right): 1. Calendar 2. Contacts 3. Tasks 4.
16) Main battery - To remove the battery cover: Press the button on the battery cover and slide it downwards. The battery cover can then be lifted off. Please note that when the button on the battery cover is pressed, the device goes into sleep mode. To replace the battery cover: The cover should be pushed firmly over the battery compartment, making sure that the fixings on the cover engage with the guides in the battery compartment. The cover can then be slid up into place.
19) LED Charge Indicator 20) Charging/Communications Connector – connects to the Charging/Communications Port on the base of the Pocket PC 21) Charging Bay for spare battery 22) DC in jack 23) USB Cable Port USB cradle 2.3 POWER 2.3.1 Using Battery Power Your Pocket PC features a main battery and a backup battery. The backup battery will ensure that no data or settings are lost when the main battery is removed or runs out of charge.
When the main battery is removed the backup battery maintains power to memory for up to 30 minutes. If the main battery goes flat but is not removed, data and settings are maintained for 72 hours. Your Pocket PC will automatically go into sleep mode when the main battery is removed and cannot be woken up until the main battery has been replaced. 2.3.2 Using Mains Power Connecting your Pocket PC to the mains power supply offers an alternative to using battery power.
To connect the USB cradle to the mains power supply, insert the power cord jack into the DC-IN jack socket on the USB cradle, and then plug the adapter into a mains outlet. See 4.1.2.2 Docking the Pocket PC in the USB Cradle for more information. USB Cradle The cradle may also be used to charge a spare battery that is not installed in your Pocket PC. To charge a spare battery, place the battery in the battery bay and connect the USB cradle to the mains supply using the cradle’s DC in jack socket. 2.3.
Pocket PC Connected to a PC via the USB Cable 2.3.4 Maintaining the Batteries All programs, files, data and custom settings that you save are stored in RAM. This is a volatile storage medium requiring electrical power to remain operational. Therefore it is essential that the Pocket PC receives a continuous power supply, as any interruption will result in the RAM contents being lost.
(a) Connect your Pocket PC to a wall outlet (see 2.3.2.1 Direct Mains Connection). (b) Plug the USB cradle into a wall outlet and dock the device in the cradle (see 2.3.2.2 Mains Power Using the USB Cradle). 2. Allow at least 1 hour to charge your main battery before you turn on your Pocket PC. It is recommended that you fully charge the battery before disconnecting the device from the mains. 3. To prepare your Pocket PC for use, follow this simple procedure the first time you turn the device on.
Your Pocket PC is set to turn itself off after three minutes of inactivity when operating on battery power. You can change these settings by tapping “Settings” on the start menu, and then selecting the System tab and tapping “Power”. 2.5 QUICK START When you turn on your Pocket PC for the first time each day, or after 4 hours of inactivity, you will see the Today screen.
In the command bar at the bottom of the screen, you can create a new appointment, contact, email message, Excel workbook, note, task, or Word document. The icon on the right hand side of the command bar shows the status of the connection between your Pocket PC and host PC during synchronization. For more information on the Today screen, as well as using the navigation and command bars, see 3.1.1 The Operating System.
3. Exploring Your Pocket PC 3.1 BASIC OPERATION Your Pocket PC is designed for easy operation, enabling you to conveniently enter and access data wherever you are. 3.1.1 The Operating System Your Pocket PC uses the Microsoft Pocket PC 2003 Premium Edition operating system. This makes navigating on your Pocket PC similar to using Microsoft Windows on your desktop or notebook PC. You will find many familiar features, such as the start menu, pop-up menus and toolbars. 3.1.1.
Icon Meaning Turns all sounds on and off Main battery is charging Main battery is low Main battery is very low Main battery is full Backup-battery low Connection is active Synchronization is beginning or ending Synchronization is occurring Notification that one or more instant messages were received Notification that one or more e-mail messages were received If more notification icons need to be displayed than there is room to display them, the Notification , will display.
To open or switch between running programs using the start menu, tap on the start button in the navigation bar, and then select the program you want from the list (see 3.1.2.1 Using the Stylus). 3.1.2 Navigation Navigating on your Pocket PC is easily done by tapping on-screen buttons with the stylus. You will also find the Navigation Button a useful feature for moving between pages and scrolling through menus and lists.
3.1.3 Entering Data There are several ways to enter data in your Pocket PC: • Use the input panel to enter typed text. You have the option of using the onscreen (soft) keyboard, or selecting an alternative method from the input list. • Use the stylus to write directly on the screen. Your handwriting will be recognized and converted to text. • Use the stylus to draw a picture on the screen. The drawing box is opened when you cross three ruled lines. • Record a message using the voice recorder.
Tap the input panel arrow and select Block Recognizer. For help with using Block . Recognizer, click the help button • Keyboard The onscreen keyboard allows you to enter text by tapping the displayed “keys” with the stylus. To display the onscreen keyboard, tap the input panel arrow and select Keyboard. • Letter Recognizer Letter Recognizer allows you to use the stylus to write onscreen, just as you would write with a pen on paper. After you write each letter it is converted to a text character.
Writing on the screen Editing and Formatting Your Writing To edit or format your writing, tap the screen at the place where you want to begin. This will move the insertion point. Select a word or multiple words by dragging the stylus. If you accidentally start to write, tap “Edit”, then try dragging the stylus again. Deselect words by tapping on the screen to bring the insertion point back.
- be aware that hyphenated words and words using some special characters or punctuation cannot be converted - if you change a word after attempting to recognize it, the new word will not be recognized. It is better to write the whole word again. 3.1.3.3 Drawing on the Screen Drawing on the screen is very similar to writing onscreen. However, selecting and editing items is different in a drawing. For example, a drawing can be resized, but handwriting cannot.
3.1.3.4 Recording a Voice Message Recording a voice message is a quick and convenient way of saving information and reminders. You can make a voice recording in any program that allows you to write or draw on the screen, such as Calendar, Tasks and Contacts. These programs allow you to embed a voice recording in a written note. Alternatively, you can make a stand-alone recording in the Notes tab. Your Pocket PC supports several recording formats.
The Find screen 3.1.4.2 Using File Explorer Tap “Programs” on the start menu, and then tap “File Explorer” to display the folders and files stored on your Pocket PC.
Use File Explorer to view, create, move and delete files and folders. Tap and hold the File Explorer box, or individual folder and file icons, to see a pup-up list of available actions. 3.2 ORGANIZING YOUR SCHEDULE USING PERSONAL INFORMATION MANAGER Your Pocket PC includes PIM (Calendar/Note/Task/Content), making it the perfect tool for organizing your schedule, keeping track of appointments and listing the tasks you have to complete.
The Calendar screen • Tap “Tools”/”Options” on the command bar to customize Calendar. • Tap “New” on the command bar to create a new appointment. • Tap an appointment to view the appointment details.
• Tap “Edit” on the command bar to change the appointment details. 3.2.2.1 Meeting Reminder You can set up a meeting reminder when you create a new appointment, or when you edit an existing appointment. On the appointment details screen, select “Remind Me” to receive a reminder before the appointment occurs. In the start menu, tap “Settings”/“Sounds and Notifications” to change the reminder properties. 3.2.2.
The Contacts screen • Open Contacts and tap “Tools”/”Options” in the command bar to change the way information is displayed. • Tap “New” on the command bar to create a new contact. Use the input panel to enter information. The new contact screen • Assign the new contact to a category by scrolling down to “Categories” and selecting one from the list. • You can find contacts or groups of contacts by tapping “Find” on the start menu, and selecting “Contacts” for the type.
• Tap and hold a task to display a pup-up menu of actions. • Tap a task to display the task summary screen. Tap “Edit” on the command bar to change the information. The task summary screen • With the task list displayed, tap “New” on the command bar to create a new task. Use the input panel to enter information. See 3.1.3 Entering Data for more information on using the input panel.
The new task screen 3.2.5 Taking Notes The Notes program allows you to quickly capture ideas and important information in the form of a written note, a drawing or a sound recording. • Open the Notes program to display a list of notes. • Select the folder containing the notes you want to display by tapping on the left side of the navigation bar. • Select the sort order for the note list by tapping on the right side of the navigation bar. • Tap and hold a note to display a pup-up menu of actions.
If you make a recording when the note list is displayed, a stand-alone recording will be made and listed along with the other notes. Tap the recording in the note list to play it. 3.3 PLAYING AUDIO AND VIDEO Your Pocket PC features Microsoft Windows Media Player for Pocket PC, enabling you to play music recordings and movie clips. For information on the audio and video file formats that are supported, tap on “Help”/”Windows Media Player” on the start menu.
• As audio and video files require large amounts of memory, you might prefer to save them on an optional CompactFlash or SD storage card. 3.4 INTERNET, EMAIL AND MESSAGES 3.4.1 Pocket Internet Explorer Using Pocket Internet Explorer on your Pocket PC is similar to using Internet Explorer on your desktop or notebook PC. Tap Pocket Internet Explorer on the start menu to open it.
up menu. The address bar is displayed below the navigation bar at the top of the screen, allowing you to enter an Internet address. After you have typed your desired Internet address, tap the “Go” button on the right side of the address bar. You can also open websites by tapping the favorites button on the command bar, and then selecting a website from one of the folders. You can add new sites and delete current favorites using the pup-up menu, or you can download favorites from your PC using ActiveSync.
Select the service and folder you want to display Select the sort order for message Tap to open a message Tap and hold to display a pop-up menu of actions ` Tap to connect and to send and receive e-mail Tap to connect to the selected service The Inbox screen You can use Inbox to work online or offline. When working online, messages are sent as soon as you tap “Send.” When you delete or move messages on your Pocket PC, the messages will be removed from your mail server.
Tap to return to the message list Tap to view the previous or next message Tap to reply to or forward this message Tap to delete this message An opened message When you connect to your email server or synchronize with your desktop computer, by default, you’ll receive messages from the last five days only, the first 100 lines of each new message, and file attachments of less than 100 KB in size. The original messages remain on the email server or your desktop computer.
contact list by tapping the Address Book button. Next, compose your message. To enter preset or frequently used messages, tap “My Text” on the command bar and select a message. Tap “Send” when you’ve finished the message. If you are working offline, the message is moved to the Outbox folder and will be sent the next time you connect.
3.4.3.1 Managing Contacts If you already use MSN Messenger on your desktop computer, your contacts will show up on your device without being added again. The MSN Messenger window shows all of your messenger contacts at a glance, divided into Online and Not Online categories. From this view, while connected, you can chat, send email, block the contact from chatting with you, or delete contacts from your list using the pup-up menu.
Enter message Tap to send message Entering Text in the MSN Messenger Chat Window To switch back to the main window without closing a chat, tap the Contacts button on the command bar. To revert back to your chat window, tap Chats on the command bar, and then select the person whom you were chatting with. To know if the contact you are chatting with is responding, look for the message under the text entry area.
3.5 PRODUCTIVITY SOFTWARE Your Pocket PC comes with productivity software to enable you to work wherever you are. Microsoft Pocket Word and Microsoft Pocket Excel on your Pocket PC are similar to Word and Excel on your desktop or notebook computer. By copying files between your Pocket PC and PC using ActiveSync, you can reference or continue to work on the most up-to-date versions of your documents and workbooks. 3.5.
Pocket Word Files List Screen You can enter information in Pocket Word in one of four modes: typing, writing, drawing, and recording. Tap the View menu on the command bar to select the input mode. Each mode has its own toolbar, which you can show and hide by tapping the Show/Hide Toolbar button on the command bar. You can change the zoom magnification by tapping “View”/“Zoom,” and then selecting the percentage you want. Select a higher percentage to enter text and a lower one to see more of your document.
3.5.1.2 Writing Mode In writing mode, use your stylus to write directly on the screen. Ruled lines are displayed as a guide, and the zoom magnification is greater than in typing mode to allow you to write more easily. See 3.1.3.2 Writing on the Screen for more information. With Space button selected, drag to insert space. An arrow appears showing the apace direction and size. Tap to highlight selected text Tap to select formatting options, such as pen weight and line color.
Select shape on the pop-up menu to convert object to proper shapes Resize an object by dragging the selection handles shapes Tap to select formatting options, such as line weight, fill color, and line color. Tap an arrow to see your choices Pen button Using the Drawing Mode in a Word Document 3.5.1.4 Recording Mode In recording mode you can embed a recording into your document. Recordings are saved as .wav files. See 3.1.3.4 Recording a Voice Message for more information.
Pocket Excel provides fundamental spreadsheet tools, such as formulas, functions, sorting, and filtering. To display the toolbar, tap “View,” and then “Toolbar.” Cell contents appear here as you enter them A Pocket Excel Workbook If your workbook contains sensitive information, you can protect it with a password. To do so, open the workbook, tap “Edit,” and then “Password.
3.6 Pictures Use the PICTURES application to view .jpg pictures stored on your device or on a storage card. The application can also be used to send pictures to others, view a slideshow of pictures or set a picture as the background on the Today screen. To execute the PICTURES application, tap Programs on the Start Menu and then tap the Pictures icon . You can browse all .jpg files in the My Device, My Documents, My Pictures or all .jpg pictures within CF or SD storage card. to start a slideshow.
4. Connecting 4.1 CONNECTING TO A PC To maximize the usefulness of your Pocket PC you need to connect to your desktop or mobile computer. After making a connection you will be able to do the following: • Back up your files to safeguard all your important data. • Transfer files so that you can continue working wherever you are. • Synchronize your calendar, to-do list and contacts list so that you can manage your schedule, tasks and appointments. • Synchronize your favorite website links.
Pocket PC Connected to a PC via the USB Cable 4.1.2 Connecting Via the USB Cradle The optional USB cradle allows hassle-free connectivity with a desktop or notebook PC, enabling you to synchronize your files with a minimum of fuss. It also offers a convenient recharging station, ensuring that the battery is always ready for use. 4.1.2.1 Connecting the USB Cradle to a PC The USB cradle includes a cable for connecting to a USB port on a PC.
4.1.3 Connecting Via Infrared Making an infrared connection is a fast and convenient way of synching your Pocket PC without making a USB connection via the USB cable or USB cradle. Infrared ports are included on many mobile PCs, although they are less common on desktop systems. To transfer files or PIM data via infrared port: 1. Ensure that the IR Port on your Pocket PC has a good line of sight to the IR Port on the device you are attempting to connect to.
The setup wizard allows you to customize the settings, and guides you through the process of establishing a connection with your Pocket PC. Your first connection begins as soon as you have completed the setup wizard. When using ActiveSync for the first time, users are given the option of 2 different modes of connection. A standard partnership can be created in which the files stored on Pocket PC and host PC are compared. The oldest versions are then replaced with the newest versions.
• Double click “My Pocket PC” to open it. • Open Windows Explorer. • If necessary, resize the windows to allow you to see the files and folders on your PC and Pocket PC. • Drag and drop files between the two windows. 4.2.3 Installing Applications on Your Pocket PC You can add to the functionality of your Pocket PC by adding more software. A wide range of software, from business applications to games, is available for Windows Powered Pocket PCs.
Users can also use CF storage card or SD storage card to back up data or personal settings in PIM using the backup application. 4.3 CONNECTING TO THE INTERNET OR YOUR NETWORK The CompactFlash (CF) and Secure Digital (SD) Expansion card slots support Type I or Type II CompactFlash cards, greatly increasing the functionality of your Pocket PC. Hardware vendors offer cards providing additional memory, peripheral and network interfaces, and various types of modems.
4.3.1 Setting Up a Remote Connection Using a Modem Card A Compact Flash modem card can be used to connect to an ISP dial-up account or log onto your network over a phone line. The operating system will detect the card when a wizard is used to set My ISP or My Work Network. Tap Add a new modem connection to begin configuration of the new card. Follow the instructions in the New Connection wizard and refer to the documentation provided with your new card to complete the installation.
The Connection Manager Screen 4.3.2 Configuring a Remote Connection Using Ethernet / Wireless LAN Card A network card or wireless LAN card can be used to connect to a network, a cable or ADSL modem or a Wireless LAN access point on the Internet. The operating system will automatically detect a new card and open the setup wizard to install the necessary drivers. Follow the on-screen instructions and refer to the documentation provided with your new card to complete the installation.
A wireless LAN card can be used to connect to the internet or intranet. Networks that have already been configured on the device are designated “preferred” networks and are listed in Wireless networks. The device can be configured to connect only to preferred networks or to search for and connect to any available network, whether it is preferred or not. For more information about wireless networking, please refer to “Set up a wireless network” in online help.
4.3.3 Synchronizing Information with Your Server Microsoft ActiveSync 3.7 allows you to share information between your Pocket PC and your exchange server. • Tap “ActiveSync” • Tap “Tools” on the command bar. • Select “Options” on the pup-up menu. • Select the Server tab. • Tap the information to synchronize. • Tap “Settings” to change the synchronization settings, and then tap OK to save. • Enter the server name, and then tap “Edit” to change your connection options. on the start menu. 4.3.
Tap the favorite you want to view Tap to add or delete a folder or favorite link The Mobile Favorites Folder on Your Pocket PC 60
5. Configuring and Optimizing Your Pocket PC 5.1 MANAGING POWER As programs, files, data and custom settings that you save are stored in RAM, it is essential that your Pocket PC receives a continuous power supply. Although the operating system and preinstalled programs will be unaffected, you will have to re-enter all other information if your Pocket PC loses power. See 2.3.4 Maintaining the Battery for more information about using battery and mains power.
The Power Settings Screen 5.2 MANAGING MEMORY The operating system and preloaded programs are stored in Flash ROM. Although this memory is not available for saving programs and files, it does not use up valuable RAM. Your Pocket PC comes with 64MB of RAM storage space. More storage space can be added by inserting an optional CompactFlash card or Secure Digital card in one of the expansion slots. Storage space is allocated for two purposes: to store applications and files, and to run programs.
The Memory Settings Screen 5.3 REMOVING PROGRAMS You can free up memory by removing unwanted programs from your Pocket PC. Preinstalled software is stored in Flash ROM and cannot be removed. However, these applications do not use valuable RAM storage space. • To remove a program, first tap “Settings” on the start menu. • Tap the “System” tab. • Tap “Remove Programs.” • Find the program you want to remove in the list of installed programs. • Finally, select the program, and then tap “Remove.
The Remove Programs Screen 5.4 CONFIGURING THE MENUS Add or remove programs on the start menu by tapping “Settings”/”Menus” (Personal tab) on the start menu, and then selecting or deselecting programs on the list. Only programs stored in the Start Menu folder are displayed in the list. If a program you want to add is not on the list, first open Explorer and move the program to the Start Menu folder.
The Menus Screen 5.5 CONFIGURING THE BUTTONS You can reprogram the four Programmable Application Buttons, enabling you to open your favorite applications quickly and easily. Tap “Settings”/”Buttons” on the start menu to change the applications assigned to the buttons.
5.6 ADJUSTING SETTINGS The Personal Settings Screen The System Settings Screen Tap “Settings” on the start menu to adjust your Pocket PC’s settings.
5.6.1 Screen You should adjust the touch screen if your Pocket PC is not responding accurately to screen taps. Select the System tab, and then tap the Screen icon. Follow the on-screen instructions. The Screen Settings Screen 5.6.2 Sounds Select the Personal tab, and then tap on the Sounds & Notifications icon. Use the slider to adjust the system volume, and then select the conditions for which you want to enable sounds. Select the Notifications tab to assign sounds and messages to various events.
The Sounds & Notifications Screen 5.6.3 Clock Select the System tab, and then tap on the Clock icon to change the time zone or adjust the time and date. You can set up two locations, home and visiting, enabling you work on local time when you make a trip without losing your home settings. Tap the “Home” or “Visiting” button to change the setting you want to use.
5.6.4 Owner Information Select the Personal tab and tap on the Owner Information icon to enter your personal details. You can display a summary of the information when you turn your Pocket PC by selecting the box at the bottom of the screen. Tap on the Notes tab to enter additional information. The Owner Information Screen 5.6.5 Password Select the Personal tab and tap on the Password icon to set up a password. This allows you to prevent unauthorized use of your Pocket PC if you leave it lying around.
The Password Screen 5.6.6 Today Screen You can customize the appearance of the Today screen by selecting the Personal tab, and then tapping on the Today icon. Select a theme from the list and check the “Use this picture as background” box if required. Tap the Items tab to select or deselect items you want to appear on the Today screen. Change the order in which items are displayed by selecting an item and then tapping on the “Move Up” and “Move Down” buttons.
The Today Screen Appearance Settings Screen Tap on the “Options” button to modify the selected item. Check the box at the bottom of the screen if you want to display the Today screen after a period of inactivity; tap on the arrow to change the period of inactivity. The Today Screen Items Settings Screen 5.6.7 Backlight Select the System tab and tap on the Backlight icon to change the options for using the backlight. You can also use this facility to adjust the brightness.
The Backlight Screen 5.6.8 CPU Mode Select the "System" tab and tap on the "Power" icon, then select the "CPU Speed" tab to change the CPU Speed. The CPU can be run in 3 different modes: - Normal Mode – This is the default CPU mode. This mode is adequate for most applications.
- Performance Enhance Mode – The CPU runs fastest in this mode but also consumes the most power. This mode may be needed when using applications that require high CPU performance. 5.6.9 CPU Lock CPU Lock function is designed to prevent application buttons initiate Pocket PC.
6. Troubleshooting 6.1 RESETTING YOUR POCKET PC You will need to reset your Pocket PC after restoring data from files backed up on your PC, or in the event of the operating system “freezing up.” Resetting provides a similar function to rebooting your PC, restarting the operating system. All saved files and settings are preserved, although any unsaved files will be lost. To reset your Pocket PC, remove it from the USB cradle and make sure that the CF Expansion slot and SD card slot are empty.
the batteries to run down completely. Once you have restored the factory defaults, you will need to re-install your programs, reload backed up files and adjust the settings to suit your personal preferences. Hardware Reset Switch Slide the Hardware Reset Switch from Left to Right, and Then Back to Left Again 6.3 TIPS 6.3.1 Frequently Asked Questions What Operating System does my Pocket PC use? Your Pocket PC is loaded with Microsoft® Pocket PC 2003 Premium Edition operating system.
How do I know when my battery is fully charged? While the battery in your Pocket PC is fast charging, the power LED will show flashing red. When the battery is 80% charged the unit switches to trickle charge mode and the LED will show a continuous green light. Why does my clock keep resetting to 12.00, 1st March 2002? The real Time Clock on your Pocket PC defaults to this time and date automatically when power is lost or after reset.
Why does my device turn on automatically when I insert or remove a Compact Flash card? This is a requirement for Pocket PC devices and is quite normal. Why can’t I connect to my PC using ActiveSync via a USB interface? Windows® NT and Windows® 95 do not support the USB standard, and so an ActiveSync connection using USB will not work. Why is ActiveSync invoked when I plug my serial cable into my device? A: Make sure that you disable the “synchronization when cradled” option in the ActiveSync Tools menu.
3) Possible reason: the operating system is “locked up.” Solution: reset the device (see 6.1 Resetting Your Pocket PC), but be aware that any unsaved data will be lost. My Pocket PC locks up or runs slowly when I try to run applications. 1) Possible reason: your Pocket PC doesn’t have enough power. Solution: recharge the battery or use mains power. 2) Possible reason: your Pocket PC doesn’t have enough memory. Solution: try closing some applications or deleting files. 5.
I can’t connect with my PC. 1) Possible reason: you are using the wrong cable. Solution: make sure that you are using the USB cable that came with your Pocket PC. 2) Possible reason: the cable is not connected correctly. Solution: check that the USB plug is correctly inserted in one of your computer’s USB ports, and that the charging/communications plug is correctly inserted in the charging/communications port on your Pocket PC or USB cradle.
5) Possible reason: you have entered incorrect information for logging into your account on your server. Solution: Enter the correct username and password for the connection. See 4.3 Connecting to the Internet or Your Net for information on setting up and modifying a connection. 6) Possible reason: the network is busy or unavailable at this time. Solution: wait and then try to connect later.
7. Specifications Item Operating system CPU LCD Display Feature Microsoft Pocket PC 2003 Premium Edtion Intel Dalhart 260 400MHz 3.5’ Transfelctive TFT Module with Touch Panel Resolution: 320X240 (64K Color) System Memory SDRAM: 64M Byte On Board Flash Memory: 64M Byte On Board AUDIO: Build in Speaker & MIC Wireless: IrDA 115Kbps Wifi Module Option 1. Compact Flash X1 (Type Π) 2. Secure Digital X1 Extension Interfaces: 3. Client USB X1 4. RS232 X1 5. DC IN +5V / 2A Function Keys: Battery 1.
Power Adapter Input:100~240VAC, 50~60Hz Output: (Voltage: 5 VDC; Current: 3A) LED Green/ Red LED for charged indicator RED LED for O/S Alarm Dimensions 135（L）㎜ × 79（W）× 16 （H） 82
Appendix A REGULATORY NOTICE This equipment has been tested and found to comply with MIC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
Appendix B OPERATING CONDITIONS Operation Temperature & Relative Humidity 0-40ºC, 10-90%RH Non-operation Temperature & Relative Humidity -10-50ºC, 10-90%RH Storage Temperature & Relative Humidity -25-65ºC, 10-90% 84
