CW0A1 Mini-note User Guide
M ini-note User Guide Copyright©2008 All Rights Reserved - Printed in Taiwan CW0A1 Mini-note User Guide Original Issue: 2008/09 This manual guides you in setting up and using your new Mini-note. Information in this manual has been carefully checked for accuracy and is subject to change without notice.
N otebouide FCC Information to User Safety and Care Instructions No matter what your level of experience with computers, please make sure you read the safety and care instructions. This information can help protect you and your computer from possible harm. Important Safety Instructions This section gives you detailed information about how to maintain a safe working environment while using the Notebook (Laptop). You can maintain its condition and performance by following these guidelines.
M ini-note User Guide cord from the wall outlet, and allow the internal system components to cool before touching. 11. Refer your system for servicing to qualified service personal under the following conditions: z When the power cord or plug is damaged or frayed. z If liquid has been spilled into the product. z If the product has been exposed to rain or water. z z z z If the product does not operate normally when the operating instructions are followed.
N otebouide 19. The risk of ignition caused by small metallic objects, such as paper clips or staples, moving around inside TRANSPORTABLE EQUIPMENT during transportation shall be reduced objects entering the equipment, please do not remove dummy card from the product. For Safety Regulation: z z z z z Risk of explosion if battery is replaced by an incorrect type. For electrical safety concerns, only use telephone cables rated 26AWG or higher. The Optical drive is a Class 1 Laser Product.
M ini-note User Guide 5. Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a dry cloth for cleaning. Ensure that no liquid enters the system. Laser Compliance Statement The CD-ROM/DVD-ROM/CD-RW/DVD-RW drive in this computer is a laser product. The CD-ROM/DVD-ROM/CD-RW/DVD-RW drive’s classification label (shown below) is location on the drive.
N otebouide INCORRECT DE LA BATTERIE. REMPLACER UNIQUEMENT AVEC UNE BATTERIE DU MÊME TYPE OU D'UN TYPE RECOMMANDÉ PAR LE CONSTRUCTEUR. METTER AU RÉBUT LES BATTERIES USAGÉES CONFORMÉMENT AUX INSTRUCTIONS DU FABRICANT. German VORSICHT ! Explisionsgefahr bei unsachgemäßen Austausch der Batterie.Ersatz nur durch denselben oder einem vom Hersteller empfohlenem ähnlichen Typ.Entsorgung gebrauchter Batterien nach Angaben des Herstellers. Swedish Explosionsfara vid felaktigt batteribyte.
M ini-note User Guide z z z z z Make sure the socket and any extension cord(s) you use can support the total current load of all the connected devices. Before cleaning the computer, make sure it is disconnected from any external power supplies (i.e. AC adapter). The power cord set (appliance coupler, flexible cord, and wall plug) you received with the Notebook (Laptop) meets the requirements for use in the country where you purchased the equipment.
N otebouide designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
M ini-note User Guide with a minimum distance of 20 centimeters between the radiator and your body. 15.247 (b)(4), the EUT meets the requirement that it be operated in a manner that ensures the public is not exposed to radio frequency energy levels in excess of the Commission’s guidelines (1.1307, 1.1310, 2.1091 and 2.1093) 5.
N otebouide Installation and use of this Wireless LAN device must be in strict accordance with the instructions included in the user documentation provided with the product. Any changes or modifications (including the antennas) made to this device that are not expressly approved by the manufacturer may void the user’s authority to operate the equipment.
M ini-note User Guide 低功率射頻電機技術規範 (920808) 4.7無線資訊傳輸設備(UNII)： 4.7.5. 在5.25-5.35 秭赫頻帶內操作之無線資訊傳輸設備，限於室內使用。 4.7.6. 無線資訊傳輸設備須忍受合法通信之干擾且不得干擾合法通信；如造成 干擾，應立即停用，俟無干擾之虞，始得繼續使用。 4.7.7.
N otebouide The optical disk drive is Class 1 Laser Product. Caution Changes or modifications not expressly approved by the manufacturer may void the user’s authority, which is granted by the Federal Communications Commission, to operate this computer. Use Conditions This part complies with Part 15 of the FCC Rules.
M ini-note User Guide EN 301 489-1 V.1.3.1 (2001-09) / EN 301 489-17 V.1.1.1 (2000-09) EN 50371: 2002 EN 55022: 2006 EN 55024: 2001 EN 60950: 1:2001 EN 61000-3-2: 2000 EN 61000-3-3: 1995 + A1: 2001 802.11b and 802.11g Restrictions: - European standards dictate maximum radiated transmit power of 100mW EIRP and frequency range 2.400-2.4835GHz; - In France, the equipment must be restricted to the 2.4465-2.4835GHz frequency range and must be restricted to indoor use.
N otebouide About Your Mini-note Congratulation for having purchased your new Mini-note. This Mini-note incorporates the newest features to serve your daily needs easily for anywhere you go.
M ini-note User Guide About Your User Guide Welcome to your New Mini-note User Guide. This manual introduces you to the basic concepts of your new Mini-note. This manual is divided into eight chapters.
N otebouide Table of Contents ABOUT YOUR MINI-NOTE ................................................................. 15 ABOUT YOUR USER GUIDE............................................................... 16 1 INTRODUCTION............................................................................. 23 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 2 FEATURE HIGHLIGHT ..................................................................... 24 UNPACKING THE MINI-NOTE .......................................................
M ini-note User Guide 2.6 3 USING YOUR MINI-NOTE............................................................ 51 3.1 3.2 3.3 3.4 3.5 3.6 3.7 4 STARTING YOUR OPERATING SYSTEM .......................................... 52 UNDERSTANDING THE KEYBOARD FUNCTIONS ............................. 52 Basic Keyboard Functions ........................................................... 54 Cursor Control Keys .................................................................... 56 Screen Control Keys..................
N 5 CONNECTING TO PERIPHERALS ............................................. 77 5.1 5.2 5.3 5.4 5.5 6 USING THE USB PORT ................................................................... 78 USING THE EXTERNAL MONITOR PORT................................................. 79 USING THE EXTERNAL AUDIO SYSTEM.......................................... 80 USING THE LAN PORT................................................................... 80 USING THE WIRELESS LAN..............................................
M ini-note User Guide SYSTEM SPECIFICATION ........................................................................ 108 Processor Unit............................................................................ 108 System Memory........................................................................... 108 LCD Display............................................................................... 108 VGA System ................................................................................ 108 Storage....
N otebouide This page is intended to be blank.
1 Introduction 1 Introduction Your Mini-note is a fully Windows® compatible portable computer. Slim, sleek ultra-portable computer. This device matches all the demands for high performance computing and multimedia technology. Your Mini-note runs a wide variety to customize your special requirements, personal productivity, entertainment, professional applications and especially ideal for use on the road.
M ini-note User Guide 1.1 Feature Highlight Before we identify each part of your Mini-note, we will first introduce you to other notable features of your Mini-note. Processing Unit • Check Your Mini-note runs on Intel® Atom microprocessor that is integrated with 512KB L2 Cache. with your dealer on the CPU type and speed. • Fully compatible with an entire library of PC software based on operating systems such as Windows XP.
1 Introduction PCI Local Bus Architecture 32-bit PCI Enhanced IDE optimizes the data transfer between the CPU and PATA hard disk drives. Support ultra DMA ATA-66 PIO Mode up to PIO Mode 4, bus mastering for LBA Scheme. Audio System Full-duplex 16-bit stereo audio system output. Sound Blaster compatible. Flash BIOS Flash BIOS allows you to easily upgrade the System BIOS using the Phoenix Flash utility program. Power and System Management 1.
M ini-note User Guide ; The Mini-note ; An AC Adapter and AC Power Cord ; Li-Ion Battery Pack ; CD Driver Utility and User Guide Carefully inspect each component to make sure that nothing is missing and/or damaged. Be sure to save the shipping materials and the carton in case you need to ship the Mini-note or store for an extended period of time. 1.3 The Inside of the Mini-note The Mini-note is compact with features on every side. First, look at the inside of the system.
1 Introduction 1. Webcam 3.6. Built-in Stereo Speakers 5. Integrated Microphone 8. Keyboard 2. Color Widescreen LCD Display. 4. LED Indicators 7. Power On/Resume Button 9. Touchpad Pointing Device • Webcam The Webcam is 1.3M pixels. It can be used as a communication device that transmits instant image through network for conference. • Color Widescreen LCD Display The Mini-note comes with a color LCD that you can adjust for a comfortable viewing position. The LCD is 8.
M ini-note User Guide Capable of displaying 16M colors (32-bit true color) LCD display control hot-keys allows you to adjust the brightness of the LCD. Simultaneous display capability for LCD and external desktop computer monitor. • Built-in Stereo Speakers Integrated mini stereo speaker provides sound and audio output for your multimedia presentations or listening pleasure. • LED Indicators Keeps you informed of your Mini-note current power status and operating status.
1 Introduction • Touchpad Pointing Device Microsoft mouse compatible with two Touchpad click buttons. The two select buttons located at each side of the Touchpad support tapping selection and dragging functions. These buttons work like a standard notebook mouse. Simply move your fingertip over the Touchpad to control the position of the cursor. Use the selection buttons at each side of the Touchpad to select menu items.
M ini-note User Guide 1.4 • Drive Access When LED turns on indicates that the system is accessing the Hard Disk or Optical Disk Drive. • WLAN/Bluetooth Access When LED turns on indicates that the wireless LAN module is activated. When LED lights off, it indicates that the function is disabled. • Caps Lock When LED turns on indicates that the Caps Lock key on the keyboard is activated. When activated, all alphabet keys typed in will be in uppercase or capital letters.
1 Introduction 1.5 • 4 in 1 card slot The card slot supports SD, MMC, MS (Memory Stick), and MS_Pro flash memory card format. You can use either of the 4 types flash memory cards for extra storage media. Please pay attention to correct direction when you insert the flash memory card. For more detail of flash card, you can refer to Chapter 3.7 • Microphone Jack Allows you to connect an external microphone for monophonic sound recording directly into your Mini-note computer.
M ini-note User Guide 1.6 • VGA Port Lets you attach an external monitor or projector for wider display. You can run the LCD display and the external monitor simultaneously or switch it to monitor only using the display hot-key. • USB 2.0 Port The Universal Serial Bus (USB) port allows you to connect USB 2.0compliant devices (for example, printers, scanners and so on) to your Mini-note. • Air-Outlet Vent Emits the heat out of your Mini-note and keeps it within operating temperature.
1 Introduction 5. DC Power Port Right Side Features • ExpressCard Slot A newly developed PC Card interface, its connector has 26 pins and has a potential transfer rate of up to 500 MB/sec (or 250 MB/sec in each direction).4 in 1 card slot • USB 2.0 Port The Universal Serial Bus (USB) port allows you to connect USB 2.0compliant devices (for example, printers, scanners and so on) to your Mini-note.
M ini-note User Guide 1.7 The Underside of the Mini-note The bottom of the Mini-note offers the following features. 1. Battery Release Latch 3. Battery Lock Latch 2. Hard Disk Compartment 4. Battery Bay Bottom of the System 34 • Battery Release Latch To release the battery, first locate the Battery Lock Latch at the left side in unlock status, then push the Battery Release Latch to the right end to remove the battery pack.
1 Introduction 1.8 Mini-note Accessories AC Adapter The AC Adapter supplies external power to your Mini-note and charges the internal battery pack simultaneously. The AC adapter has an auto-switching design that can connect to any 100VAC ~ 240VAC power outlets. Change the power cord if you are going to use your Mini-note in countries with different connector outlets. When you connect the AC adapter, it charges the battery whether or not the Mini-note is powered on.
M ini-note User Guide This page is intended to be blank.
Getting Started 2 2 Getting Started Your Mini-note is designed and pre-configured for easy setup and use. This chapter describes the installation steps you should follow to get the Mininote up and running as quickly as possible.
M ini-note User Guide 2.1 Using the Battery Pack The Mini-note is designed to operate with one of the following power sources: • With AC power using the AC adapter connected to an electrical outlet. • With a Lithium-Ion (Li-Ion) battery pack. You should use the AC adapter whenever it is possible, relying on the battery pack only when AC power is unavailable. Before you use your Mini-note, install and recharge the battery pack first.
Getting Started 2 Installing the Battery Pack This Mini-note provides the most convenient way to install the battery pack into your Mini-note. With the extended nose directed toward the compartment, insert and push the battery pack.
M ini-note User Guide Replacing the Battery Pack When your Mini-note estimates that the battery only has enough charge to continue for a few minutes, it will alert you with a battery low warning beep. If you are consuming a lot of power by using the audio system, and the hard disk drives, your Mini-note might run out of charge much sooner than you expect. You should always respond to the battery low indication by connecting to AC power or turning off your Mini-note, or suspending your Mini-note to disk.
Getting Started 2.2 2 Connecting the AC Power Source The AC adapter provides external power source to your Mini-note and charges the internal battery pack at the same time. The AC adapter also has an autoswitching design that can connect to any 100VAC ~ 240VAC power outlets. To connect the power adapter: 1. Plug the AC power cord into the power socket of the AC power adapter. 2. Plug the other end of the AC power cord to a live AC wall outlet. 3.
M ini-note User Guide y For the power supply of this equipment, an approved power cord has to be used. y Make sure the socket and any extension cord(s) you use can support the total current load of all the connected devices. y Before cleaning the Mini-note, make sure it is disconnected from any external power supplies (i.e. AC adapter). 2.3 Starting Your Mini-note The Power/Resume button is found on the right-top of the base unit.
Getting Started 2 already made the necessary settings for your Mini-note optimal operation. Refer to Chapter 6 on running the SETUP program later. After the test has completed, your Mini-note will start to search and boot up the operating system from your hard drive. The Mini-note normally comes with a Windows operating system pre-installed in your hard drive. Consult the Windows manual on how to use the program. If not, contact your dealer for assistance. 2.
M ini-note User Guide INSTALLING WINDOWS XP FROM OPTICAL DISK DRIVE To install Windows XP directly from your USB - Slim Combo Drive (optional), please go to Boot menu of BIOS setup menu. Use arrow key to select "CD-ROM Drive", then use "+" or "-" to move it to the top. Go to Exit menu and select "Exit Saving Changes". Accordingly, insert the Windows XP installation CD into USB - Slim Combo Drive (optional) with following the instructions on the screen to finish the installation.
Getting Started 7. Click "Next" to complete it. 8. Tick the option "Yes, I want to restart this computer now.", and press “Finish” to restart your system. 2 INSTALLING THE VGA DEVICE DRIVER Following is the procedure for installing the Video Accelerator 3D Adapter VGA driver to your Mini-note: Installing VGA device driver for Windows XP 1. Click the Start button, then point to Run. The Run dialog box appears. 2. Click the Browse button and specify the directory as. "E:\Drivers\WinXP\VGA\Setup.
M ini-note User Guide 2. Click the Browse button and specify the directory as. "E:\Drivers\WinXP\Audio\Setup.exe" where the audio driver is located. 3. Click "OK" to execute the setup program. The Setup box appears. 4. Click ”Next” continuously to install this driver when screen displays this command. 5. Tick the option "Yes, I want to restart my computer now.", and press “Finish” to restart your system.
Getting Started 2. Click Browse button and specify the directory as "E:\Drivers\WinXP\Wireless LAN\Setup.exe" 3. Click "OK" to execute the setup program. The Setup box appears. 4. Click “Next” twice to execute the setup program. 5. Click “Install” to implement setup program to install this driver. 6. Click “Finish” to complete the installation.
M ini-note User Guide Installing LAN device driver for Windows XP 1. Click the Start button, then point to Run. The Run dialog box appears. 2. Click the Browse button and specify the directory as. "E:\Drivers\WinXP\LAN\Setup.exe " 3. Click "OK" to execute the setup program. The Setup box appears. 4. Click "Next” to execute the setup program 5. Click “Install” to implement setup program to install this driver. 6. Click “Finish” to complete the installation.
Getting Started 2 After turning off the Mini-note, make it a habit to leave the LCD panel open for a while whenever used for an extended period of time. This allows the inside parts of the Mini-note to cool off. Closing the panel will force the heat up against the LCD screen, which may degrade the LCD when done regularly. More importantly, never close the LCD panel for a long period of time when is on and power saving features are disabled.
M ini-note User Guide This page is intended to be blank.
Using Your 3 3 Using Your Mini-note This chapter describes how to operate the standard built-in features of the Mini-note.
M ini-note User Guide 3.1 Starting Your Operating System The operating system is the software foundation for your Mini-note. It is the platform for all your software application programs to run on. The most popular operating system today is Microsoft® Windows®. The Mini-note comes with an operating system pre-installed and needs only to be setup and configured during initial use. 3.
Using Your 1. Function Keys 3. Windows Start Menu Key 5. Windows Shortcut Key 3 2. Control Keys 4. Control Keys 6. Cursor Control Keys Keyboard Key features and operations are described below: • Function Keys Function keys are application-driven, like F1 through F12 can be found on the keyboard. These keys work together with the Fn key to activate special functions. Some keys (printed in blue on keypad) are preprogrammed with dual functions.
M ini-note User Guide • Windows keys Use the following two keys to facilitate your work: Start Menu key Displays the Start menu. Shortcut/Application key Provides quick access to shortcut menus. This key acts like a right mouse button. • Cursor Control keys Cursor control keys let you position the cursor on the screen where you want. In the screen, the cursor is a blinking underline, block, or vertical bar depending on the application. The cursor indicates where the next text typed is inserted.
Using Your Keypad + 3 Function Description + key. Known as the Print Screen key. Press this key to map the whole screen to share memory for your specific usage. key. Known as the Delete key. Press this key to delete the character to the right of the cursor, or delete marked texts or items. key. Press this key to temporarily halt execution of a command. Pressing any other key to resume execution of a command. key.
M ini-note User Guide Keypad + Function Description key. Used in most application program to always activate uppercase alphabet characters. + key. Used in most application program to scroll the screen without having to move the cursor. CURSOR CONTROL KEYS Keypad Function Description Up arrow key. Moves the cursor up one line at a time. Down arrow key. Moves the cursor down one line at a time. Left arrow key. Moves the cursor to the left one space at a time.
Using Your Keypad 3 Function Description + + key. Moves the cursor up one screen at a time + + key. Moves the cursor down one screen at a time + + key. Moves the cursor to the end of a screen or line. WINDOWS HOT KEYS Keypad Function Description key. Pulls up the Windows Start menu. key. Performs a mouse right-click function for Windows system.
M ini-note User Guide Keypad Function Description To enable the Bluetooth function. + To enable the Wireless LAN function. + 58 + Switches display between LCD, CRT, or LCD and CRT simultaneously. + To enable or disable the Webcam function. + To shut down or resume the built-in system speaker volume. + Decreases the brightness of LCD display incrementally. + Increases the brightness of LCD display incrementally. + Decreases the audio volume of the Mininote incrementally.
Using Your Keypad + 3.3 3 Function Description Increases the audio volume of the Mininote incrementally. Using the Touchpad Pointing Device Your Mini-note comes with a built-in Touchpad pointing device that is found on the center of the palm-rest surface. The Touchpad offers a number of options that let you customize how it functions. To access these options, locate the Control Panel and double click on the Mouse icon.
M ini-note User Guide 1. Left Selection Button 2. Right Selection Button 3. Touchpad Touchpad Features Here how to use the Touchpad pointing device: 60 1. The rectangular surface acts like a miniature duplicate of your display screen. To move the mouse cursor, place the finger lightly on the sensor pad and move in the desired direction. If you reach the end of the pad, lift your finger and place it back down on the other side of the pad. 2.
Using Your 3. 3 To simulate holding the mouse button down (dragging an icon or selection), use the tap-and-drag gesture. This feels much like a doubleclick, except that the finger remains on the pad after the second tap: Tap, lift, tap, hold and move. The simulated button remains held as long as the finger remains on the pad. Avoid spilling any liquid on the Touchpad surface and always keep the Touchpad surface and pointing finger dry from sweat built-up.
M ini-note User Guide Display Possible Resolution Maximum Colors Widescreen 8.9” WSVGA LCD CRT Only 1024 x 600 16 million colors 1920 x1200 (Maximum resolution) 16 million colors 65,536 or 64K colors is also equivalent to 16-bit high color while 16 million or 16M colors is equivalent to 32-bit true color. You can use the + hot-key to switch the display between LCD only, CRT only, or both LCD and CRT display.
Using Your 3 off power of most components when system is idle or not in use. This feature not only gives you longer battery life but also cools the systems and components as well. The definitions of Standby Mode, Hibernation Mode, and Shutdown are depicted as follows: Standby Mode Standby Mode is mainly for power saving. When the Standby Mode is activated, your display and hard drive are shut down and all open applications and documents are stored in RAM (Random Access Memory).
M ini-note User Guide Shutdown All power has been turned off from the Mini-note. This means that no power including external AC power source and battery power source will be consume by the Mini-note. 3.6 Working with the Built-in HDD Your Mini-note is equipped with a built-in large capacity 1.8 inch hard disk drive where you store and run your Mini-note’s operating system and application software programs. 3.7 Using Flash Memory Cards FLASH MEMORY CARD Flash Memory is a memory storage media.
Using Your 3 Only one correct side can be accepted for the 4 in 1 card slot. If you cannot insert the card into the 4 in 1 slot or you had inserted the card but it is not recognized by the computer, please remove the card and insert it again. To prevent the damage made both on card and the slot, never forced an entry into the slot with incorrect side. Removing Flash Memory Card To remove the flash memory card, you can pull out the card directly, there is no release button for flash memory slot.
M ini-note User Guide This page is intended to be blank.
Fun with Multimedia 4 4 Fun with Multimedia This chapter lets you make full use of all the multimedia features of your Mini-note in having fun and excitement during work or leisure.
M ini-note User Guide 4.1 Multimedia Features Your Mini-note is rich in multimedia features that make your computing fun, comfortable, exciting and easy. Your Mini-note is well able to perform all multimedia tasks through the following: 4.2 • Intel ® Atom Processor • Up to 1GB DDRII- SDRAM • USB - Slim Combo Drive (optional) • Provides blazing graphics embedded in the Intel 945 GSE chipset • Full-duplex 16-bit stereo speaker with wavetable support. Sound Blaster compatible.
Fun with Multimedia 4.3 4 Setting up the Audio Driver Properties Before you can start using the audio capabilities of your Mini-note, you need first to setup properly the audio driver after installing Windows. If you bought your Mini-note with Windows pre-installed, it is most likely that your dealer have configured the sound driver for you. If not, you must refer to Chapter 2 on how to setup the sound drivers for Windows. 4.
M ini-note User Guide Figure 4-1 Entertainment Programs Group The standard multimedia components are as follows: • Windows Media Player - for playing sound, video and animation files • Sound Recorder - for recording sounds and playback • Volume Control - for adjusting the volume of mixer For more information on how to operate these multimedia components, run the program and click on the Help menu. 4.
Fun with Multimedia 4 be played back through the internal speaker or earphone jack using an external speaker, headphone, or earphone set. You can also use the files as voice annotations on many applications for more real presentation. This section will describe briefly how you can record sounds under Windows operating system. To record sounds, you need to run the Sound Recorder program from the Multimedia program groups.
M ini-note User Guide 2. Click Properties in the Options main menu. 3. Click the round button for Recording and tick off each component that list in the "Shows the following Volume Controls" box. Figure 4-3 Audio Properties 4. 72 Click OK and the Recording Control dialog box will appear. Here, you will select the input device for the recording source. If you want to record from the USB - Slim Combo Drive (optional) with audio music, you must click on CD Player.
Fun with Multimedia Figure 4-4 4 Recording Volume Control USING AN EXTERNAL MICROPHONE Your Mini-note allows you to connect an external microphone for high quality recording. The external microphone jack is found on the front side of your Mini-note. Use only microphone with 1/8-inch mini-jack connector. Follow the same procedure for recording voice. 4.6 Playing Audio and Sound Your Mini-note has built-in twin speakers to playback audio and sound.
M ini-note User Guide USING THE WINDOWS MEDIA PLAYER The easiest way to playback multimedia media files is to run the Windows Media Player. Follow these steps: 4.7 1. Click on Start, point to Programs, Accessories, and then Entertainment. 2. Click on Windows Media Player to start program. 3. Click on the File menu and select the file you want to play. 4. When the file is recognized and open, click on the Play button to start playback.
Fun with Multimedia 4 Figure 4-6 Windows Media Player 75
M ini-note User Guide This page is intended to be blank.
Connecting to Peripherals 5 5 Connecting to Peripherals This chapter describes how you attach additional peripheral devices to your Mini-note. The Mini-note allows you to add a printer or mouse; connect an external monitor and keyboard, or other compatible peripheral device. Use of additional devices is described in this chapter.
M ini-note User Guide 5.1 Using the USB Port USB (Universal Serial Bus) is a hardware interface that enables you to connect multiple devices (such as printers, mice, keyboards, storage devices, joysticks, digital cameras, and video conference cameras, etc.) to your Mini-note, and up to 127 devices can be attached. Besides, USB’s hot swap capability allows everything to be plugged in and unplugged without turning the system off.
Connecting to Peripherals 5.2 5 Using the External Monitor Port Your computer has a 15-pin Monitor port for supporting any external CRT or LCD color monitor. You need a display signal cable (usually provided with the monitor). One end of the cable must have a 15-pin connector for the system. To connect an external monitor: 1. Turn off your computer and make sure the monitor power switch is turned off. The Mini-note computer must be powered off or suspended while the monitor is being connected.
M ini-note User Guide Refer to Chapter 3 regarding the possible External CRT resolutions and how to change the display properties. 5.3 Using the External Audio System At the front side of your Mini-note, you will find the built-in audio ports. You can connect Microphone jacks, earphone or powered speaker. To connect to an audio jack: 1. Locate the audio port (Microphone, Headphone) that you want to use to the target device. 2. Plug the jack into the port on the front side of the system.
Connecting to Peripherals 5 network (LAN) and supports data transfer rates at 10Mbps and can be up to 100Mbps. The 10Base-T standard also called Twisted Pair Ethernet is connected with RJ-45 connectors. The 100Base-TX is based on the older Ethernet standard. Because it is 10 times faster than Ethernet, it is often referred to as Fast Ethernet. The built-in LAN module provides a standard RJ-45 connector. To connect the twisted-pair cable to your LAN port: 5.5 1.
M ini-note User Guide Access Point (AP) is the wireless transmission and receiving device, it generally connects to the server of a LAN environment or act as a LAN hub with wireless connection. Access point can be set in an office environment, airport, major railway station, etc. that depends on the construction of each country. In most case, you probably can use it at office, please consult with the network department of your company for more details. This Mini-note integrates built-in 802.
Customizing Your Mini-note 6 6 Customizing Your Mini-note Your Mini-note uses the Phoenix BIOS Setup program allowing your system configuration to be altered to best suit your computing needs: Useradjustable options include system time and date, disk drive configuration and password setup. BIOS information stored in the CMOS RAM will remain permanent unless changed. Default factory settings are used top optimize performance of your Mini-note and do not need further alteration to operate your Mini-note.
M ini-note User Guide 6.1 Running the BIOS Setup Program Your Mini-note is setup and pre-configured. The Mini-note’s BIOS (Basic Input-Output System) Setup program may be used to change system configuration information such as the current date and time, or your hard disk drive type. The Setup program can be accessed when you power on the system and pressing the function key before the Microsoft® Windows® operating system begins.
Customizing Your Mini-note 6 • Item Specific Help The right side of the screen. This area describes each parameter and its available settings. • Menu Bar The top line of the screen. Each of the five selections displays its own screen. • Parameters The left side of the screen. This area lists the parameters and their current settings. • Key Status Bar The bottom part of the screen. These lines display the keys available to move the cursor, select a particular function and so forth.
M ini-note User Guide 6.2 Using the Main Menu Setup Phoenix BIOS Setup Utility Main Advanced Security Boot Exit Item Specific System Time: [07 :54 :32] System Date: [09/02/2008] , selects field. 4 IDE Channel 0 Master [TOSHIBA MK6028GAL-(PM)] Intel (R) Atom(TM) CPU N270 CPU Speed: 1.60GHz System Memory: 640 KB Extended Memory: 916480 KB BIOS Version: 0.
Customizing Your Mini-note 6 • System Date Allows you to set the system date using the month/date/year format. Enter the current time for reach field and use the , +, or key to move from one field or back to another. You can also change the system time from your operating system. • IDE Channel 0 Master This field is for information only as the BIOS automatically detects the storage media.
M ini-note User Guide 6.2.1 INTERNAL HDD SUB-MENU Phoenix BIOS Setup Utility Main IDE Channel 0 Master [TOSHIBA MK6028GAL- Type: [Auto] LBA Format Item Specific Help User = you enter parameters of hard-disk drive Total Sector: 117210240 installed at this connection. Maximum Capacity: 60012 MB Auto = autotypes hard-disk drive installed here. Multi-Sector Transfers: [16 Sectors] CD-ROM = a CD-ROM LBA Mode Control: [Enabled] drive is installed here.
Customizing Your Mini-note 6.3 6 Using the Advanced CMOS Setup Phoenix BIOS Setup Utility Main Advanced Security Boot Exit Item Specific Help Legacy USB Support [Enabled] Display the diagnostic Boot-time Diagnostic Screen: [Enabled] screen during boot. Energy Star Support [Enabled] . .
M ini-note User Guide 6.4 Security Menu Setup Phoenix BIOS Setup Utility Main Advanced Security Boot Exit Item Specific Help Supervisor Password Is: Clear User Password Is: Clear Supervisor Password controls access to the 90 Set Supervisor Password [Enter] Set User Password [Enter] Password on boot [Disabled] F1 Help ÇÈ Esc Exit Å--> Select Menu Enter Select Item F5/F6 Change Values setup utility.
Customizing Your Mini-note 6.5 6 • Set User Password This field is only available when Supervisor Password has set. Enter the user password when boot the system or resume from suspend mode. But if the Write Protect is set in the Fixed disk boot sector field, you should enter a supervisor password to access the fixed disk when boot the system or resume from suspend mode. • Password on Boot If you set this field to Enabled, your Mini-note will always ask for the password every time you boot your .
M ini-note User Guide F1 Help Ç È Select Item Esc Exit Å--> Select Menu Enter Select Sub-Menu F5/F6 Change Values F9 Setup Defaults F10 Save and Exit This page allows you to set the search drive sequence where the system will try to boot up first. To select the boot device, you can use the up or down arrow key, then press <+> to move up the device in the list or press <-> to move down the device in the list. To exit from this menu, press . 6.
Customizing Your Mini-note 6.7 • Exit Discarding Changes Allows you to discard all changes made while running the BIOS setup program and exit from the system setup program. • Load Setup Defaults Lets you load the default values for all setup items. • Discard Changes Reverts to previously selected settings. • Save Changes Saves Setup data to CMOS. 6 How to Upgrade the BIOS Your Mini-note uses EPROM Flash BIOS chip that allows you to easily upgrade the BIOS program.
M ini-note User Guide 4. Press any key to restart this system. Contact your dealer for the latest BIOS update file.
Using Options 7 7 Using Options This chapter describes the advanced features and expandable architecture in your Mini-note.
M ini-note User Guide System Upgrade This section provides some steps in doing system upgrade for your Mini-note. The upgrade procedures include the following: 7.1 Hard Disk Upgrade Your Mini-note computer offers one 1.8" format, 8 mm height hard disk. If the volume does not fit your need or it is crashed, you can upgrade it by replacing with new hard disk. Please do the following steps to change it. 96 1. Remove the screw and open the cover by lifting its upper side cover. 2.
Using Options 7 8. Cover the lid, then rotate and tighten the screws. 9. Set the boot device as DVD/CD-RW Combo drive and Primary Master as Auto on BIOS setup menu. Please refer to Chapter 6 about the setting of BIOS setup menu. Then, boot the system by using WinXP CD-ROM and the system will detect the hard disk automatically and prompt you how to format the new disk. Please tighten the screws located at each side of the hard disk before operating the hard disk.
M ini-note User Guide This page is intended to be blank.
Caring for Your Notebook 8 8 Caring for Your Mininote Your Mini-note the latest features in mobile computing and multimedia technology. If properly cared for and maintained, the performance and reliability of the Mini-note can be greatly prolonged.
M ini-note User Guide 8.1 Important Safety Instructions This section gives you detailed information about how to maintain a safe working environment while using the Mini-note. You can maintain its condition and performance by following these guidelines. Please read it carefully to ensure maximum safety. 100 • Before cleaning the Mini-note, make sure it is disconnected from any external power supplies (i.e. AC adapter, car adapter and so on).
Caring for Your Notebook 8 • Though your AC adapter is suitable for universal international voltage, it still requires a stable and continual power supply. Make sure the voltage of the power source when connect the Mini-note to the power outlet. If your are not sure of your local power specifications, consult your dealer or local power company. • Place the power cord in such a way that people can not step on it. Do not place anything over the power cord.
M ini-note User Guide 8.2 • An approved power cord has to be used for the Mini-note power supply. For a rated current up to 6A and an equipment weight more than 3 kg, a power cord not lighter than H05VV-F, 2G, 0.75mm2, has to be used. • To avoid any damage happened to the internal device, you should first disconnect the AC adapter and remove the battery pack from the Mininote when replacing any internal device.
Caring for Your Notebook 8 You should also enable the power management of your Mini-note to turn off the LCD power and display when the system is inactive for some time. Adding a screen saver also helps prolong the life of your Mini-note screen. Follow the safety guidelines mentioned earlier and how to clean your Mininote. 8.4 Maintaining Your Hard Disk Losing your data has the same consequences as a system break down. Users must make it a habit of doing hard disk maintenance every week or so.
M ini-note User Guide 8.5 Battery Care Guidelines The battery pack furnished with the Mini-note requires reasonable care and handling to ensure efficient operation and maximum life. There is a risk of fire and chemical burn if the battery pack is handled improperly. To ensure that the battery pack endures normal life cycle, always observe the following precautions when handling the battery pack: 104 • Handle batteries carefully.
Caring for Your Notebook 8.6 8 When You Travel For safety and convenience when traveling, please follow these instructions: • Back up all needed files on your hard disk before traveling. • Recharge your battery overnight to ensure full battery power before you leave. • Don't forget to bring along the AC adapter and extra battery pack. • Try to bring backup software as well. • Check the voltage rating and the outlet type of your destination.
M ini-note User Guide This page is intended to be blank.
System Specification A APPENDIX A System Specification This appendix provides technical specifications for the Mini-note.
M ini-note User Guide System Specification PROCESSOR UNIT • Intel® Atom microprocessor • 1.6 GHz CPU • 512KB integrated L2 cache for the processor SYSTEM MEMORY • One 200-pin memory slot • 512MB and 1024MB memory modules using 200-pin SODIMM • DDRII – 533 SDRAM modules LCD DISPLAY • 8.
System Specification A STORAGE 1.
M ini-note User Guide • 2 x Universal Serial Bus (USB 2.0) • 1 x LAN port • 1 x 4-in-1 card slot WIRELESS DEVICES IEEE 802.11b/g, Mini-PCI card AC/DC POWER SUPPLY ADAPTER Universal auto-switching (100V~240V) 40W adapter, 20 Volt BATTERY • Rechargeable 4 Cells or 6 Cells Li-ion battery pack with Smart Battery function • Approximately 4 Hours (for 4 Cells) or 6 Hours (for 6 Cells) Battery Life (for Battery Mark) WEIGHT AND DIMENSION 110 • 230 (W) x 172 (D) x 29.4 ~ 38.
