Bluetooth Low Energy Embedded Module FBL601BC_serial User Guide Version 1.0 FIRMTECH Co., Ltd. Homepage : http://www.firmtech.co.kr Cafe : http://cafe.naver.com/firmtech7 Mail : contact@firmtech.co.
FBL601BC_serial User Guide Version 1.0 Revision History Revision History Revision Date Ver 1.
FBL601BC_serial User Guide Version 1.0 (C) Copyright FIRMTECH Co., Ltd. 2005 (C) Copyright FIRMTECH Co., Ltd. 2005 All rights reserved The products and operation descriptions contained herein shall be protected by copyright law. Any part or whole of products or operation description shall not be copied, reproduced, translated, nor transformed into readable form by electronic device or machines, without prior consent in writing by FIRMTECH Co., Ltd.
FBL601BC_serial User Guide Version 1.0 List of Content List of Content Revision History ........................................................................................................................... 2 (C) Copyright FIRMTECH Co., Ltd. 2005 ....................................................................................... 3 List of Content ............................................................................................................................. 4 1 What is Bluetooth? ...
FBL601BC_serial User Guide Version 1.0 1 What is Bluetooth? 1 What is Bluetooth? 1.1 Features of Bluetooth Objectives of Bluetooth : To Realize Wireless Communication for Short Distance with Low Power Consumption, High Reliability, and Low Cost. Frequency in Use: To Use ISM(Industrial, Scientific, Medical) Band which does not require any permission to use. - 2.400 – 2.4835 GHz, 79 channels 2.465 – 2.
FBL601BC_serial User Guide Version 1.0 2 Product Overview 2 Product Overview Major Features of FBL601BC_serial 1. Bluetooth Specification 5.2 Low Energy Support 2. Easily Applicable to the Product with 8 Pins Header Type 3. 4. Support AT Command, and capable to control FBL601BC_serial by using AT Command UART can be used as an interface ※ We request the new users of FBL601BC_serial to read the information on this description carefully before they start to use the products. 3 Product Components 3.
FBL601BC_serial User Guide Version 1.0 4 FBL601BC_serial Appearance 4 FBL601BC_serial Appearance 4.
FBL601BC_serial User Guide Version 1.0 4 FBL601BC_serial Appearance 4.2 FBL601BC_serial PIN Assign
FBL601BC_serial User Guide Version 1.0 5 Interface (Pin Connection) -FA_SET / CONFIG_SELECT If you want to enter the configuration mode, turn on the power to the module while inputting LOW Signal (0V) to Configuration Select (No. 4 pin). If you want to change to the factory default value, enter the LOW Signal (0V) for more than 5 seconds into the Factory Reset (Pin No. 4) after entering the configuration mode and all setting values will be changed to the original purchase status.
FBL601BC_serial User Guide Version 1.0 6 Interface Board (Jig Board) 6 Interface Board (Jig Board)
FBL601BC_serial User Guide Version 1.0 7 Specification of FBL601BC_serial 7 Specification of FBL601BC_serial No. Part Specification 1 Bluetooth Spec. Bluetooth Specification 5.2 Low Energy Support 2 Communication distance 10 M 3 Frequency Range 2402 ~ 2480 MHz ISM Band 4 Sensitivity -79dBm (Typical) 5 Transmit Power 0dBm(Typical) 6 Size 15.50mm x 18.50 mm x 12.34mm 7 Support Bluetooth Profile GATT Service 8 Input Power 3.3V 9 Current Peripheral 2.
FBL601BC_serial User Guide Version 1.0 8 Current Consumption 8 Current Consumption Current Consumption (mA) Status MIN MAX AVG Ready 1.79 1.79 1.79 Advertising 1.86 1.97 1.90 Connection 1.92 1.94 1.93 < Table 8-1 Peripheral Current Consumption of FBL601BC_serial> Current Consumption (mA) Status MIN MAX AVG Ready 1.87 1.87 1.87 Scanning 4.25 4.48 4.32 Connection 1.95 1.97 1.
FCC MODULAR APPROVAL INFORMATION EXAMPLES for Manual This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation. CAUTION: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
Validity of using the module certification: In the event that these conditions cannot be met (for example certain laptop configurations or co‐ location with another transmitter), then the FCC authorization for this module in combination with the host equipment is no longer considered valid and the FCC ID of the module cannot be used on the final product.