Embedded Bluetooth Module FB755AC & FB755AS ABOUT FB755AC & FB755AS version 1.
FB755AC & FB755AS Version 1.0.3 (C) Copyright FIRMTECH Co., Ltd. 2005 All rights reserved The products and operation descriptions contained herein shall be protected by copyright law. Any part or whole of products or operation description shall not be copied, reproduced, translated, nor transformed into readable form by electronic device or machines, without prior consent in writing by FIRMTECH Co., Ltd.
FB755AC & FB755AS Version 1.0.3 FIRMTECH Co., Ltd. Room 720, C Unit of Sigma Officetel, 18, Kumi Dong, Bundang Ku, Sungnam City, Kyonggi Do. Homepage : www.firmtech.co.kr Marketing Inquiry : contact@firmtech.co.kr Technical Support Inquiry : techsupport@firmtech.co.
FB755AC & FB755AS Version 1.0.3 What is Bluetooth? 1. Features of Bluetooth 1) Objectives of Bluetooth : To Realize Wireless Communication for Short Distance with Low Power Consumption, High Reliability, and Low Cost. 2) Frequency in Use: To Use ISM(Industrial, Scientific, Medical) Band which does not require any permission to use. - 2.400 – 2.4835 GHz, 79 channels - 2.465 – 2.
FB755AC & FB755AS Version 1.0.3 Products Overview FB755AC & FB755AS has been developed to replace the previous RS232 Cable system with wireless mobile communication system to use. Major Features of FB755AC & FB755AS 1. Bluetooth Specification 2.0 Support 2. Bluetooth Piconets(Point to Multipoint) are configurable up to (max 1:7) 3. Easily applicable to the Product with 12Pins Header type 4. Support AT Command, and capable to control FB755AC & FB755AS by using AT Command. 5.
FB755AC & FB755AS Version 1.0.3 ■ LIST OF CONTENTS 1 PRELIMINARY USAGE OF PRODUCT .................................................................................................... - 7 1-1 PRODUCT COMPONENTS......................................................................................................................- 7 1-1-1 FB755AC ................................................................................................................................................ - 7 1-1-2 FB755AS...
FB755AC & FB755AS Version 1.0.3 1 PRELIMINARY USAGE OF PRODUCT 1-1 PRODUCT COMPONENTS 1-1-1 FB755AC - FB755AC module - On-board chip antenna 1-1-2 FB755AS - FB755AS module - Stub antenna - Antenna extension cable 1-1-3 PC Interface Kit - PC Interface board(Jig board) - Serial extension cable - DC Power Adapter - USB Cable - CD If you find any of above components is defective, or not included in the package, please contact the seller you purchased.
FB755AC & FB755AS Version 1.0.3 2 PERFORMANCE OF PRODUCTS Part Specification Bluetooth Spec. Bluetooth Specification 2.0 Support Communication distance 100 M Frequency Range 2402 ~ 2480 MHz ISM Band Sensitivity -83dBm (Typical) Transmit Power 12dBm (Typical) Size FB755AC 27.7 x 20.6 mm FB755AS 27.7 x 20.6 mm Support Bluetooth Profile GAP, SPP Input Power 3.
FB755AC & FB755AS Version 1.0.
FB755AC & FB755AS Version 1.0.
FB755AC & FB755AS Version 1.0.
FB755AC & FB755AS Version 1.0.3 PIN NO.
FB755AC & FB755AS Version 1.0.3 wireless range is smoothly made. In standby mode for connection with Bluetooth, or connection trial, or searching for around Bluetooth device will repeat LOW and HIGH. - UART_CTS/UART_RTS, UART_DTR/UART_DSR When the flow control is not used, non connection will not affect the operation of FB755AC & FB755AS. - STREAM_CONTROL / STREAM_STATUS The connection is necessarily required for 1:N communication. For 1:1 communication, don’t need to connect.
FB755AC & FB755AS Version 1.0.
FB755AC & FB755AS Version 1.0.
FB755AC & FB755AS Version 1.0.3 6 PRELIMINARY PRODUCT COMPONENTS The preliminary value of product is set as on the
. Please be sure of basic set value and so on before using the product. TYPE SET VALUE Device Name FB755v.x.x.FB755AC & FB755AS Version 1.0.
FB755AC & FB755AS Version 1.0.3 8 How to Complete PC Configuration The following PC Configuration shall be explained on the assumption that FB755AC & FB755AS is connected with PC Interface Board(Jig board). If it is connected to MICOM, then you can change the set value by using AT command language with reference to Attachment AT command language. Components for PC Configuration - FB755AC & FB755AS module - PC Interface Kit The PC Configuration could be processed with two significant ways.
FB755AC & FB755AS Version 1.0.3 (4) Select “CONNECT”( Blue Lined) on the main display. 1 Select Product : Name of Product in Use 2 DEBUG CHAR : Default is 0x02.
FB755AC & FB755AS Version 1.0.3 1 Serial Connection, Ready To Set : Show the connection status of Config tool and products 3 Status Message : Display the status of command language in progress (6) After the product and config tool is connected properly, select CONFIG button(blue lined box) on Figure<8-3>, display like will comes up to allow to configure the environment.
FB755AC & FB755AS Version 1.0.3 2 Status Value : Output the status value with the form of message. 3 Status of Command Language : Since the preliminary operation method is to use AT command, the progressed AT command language will output in the form of message. 1 READ STATUS Button : To read in the PC configuration set in the product.
FB755AC & FB755AS Version 1.0.3 8-2 PC Configuration using Serial Communication(Hyper Terminal) Program 8-2-1 To execute Hyper Terminal To set up PC configuration using Hyper Terminal, following works will have to be done before power is authorized to the PC connected with the product. To accomplish the PC configuration, serial communication program is required. Here Hyper Terminal will be used for explanation. (1) Set the Config Select on the PC Interface Board (Jig Board) ON.
FB755AC & FB755AS Version 1.0.3 (4) When Registration Information Window comes up as on , select Bit per second : 9600, Data bit : 8, Parity : none, Stop bit : 1, Flow control : none, which will execute Hyper Terminal.
FB755AC & FB755AS Version 1.0.3 (5) Basically, the Hyper Terminal does not show the entered character. To make sure of the entered character, select [File]Æ[Properties] on the Menu, then registration information window will appear shown as on , click the ASCII Setup button. (6) As shown on , “Check Echo typed characters locally” and come out pressing the acknowledge button.
FB755AC & FB755AS Version 1.0.3 (7) If power is authorized on the Interface Board, the menu as shown on will be output on the Hyper Terminal.
FB755AC & FB755AS Version 1.0.3 8-2-2 How to Use PC Configuration Menu The user will select the menu want to change. To select the menu, you may just select the number given on the left side. For example : To change “DEVICE NAME”, enter : [“0”]Æ[Enter] Note : At condition, Pressing Reset button for more than 2 seconds will reset all the configured values to the initial status (factory preset status). Following is the order to use the menu.
FB755AC & FB755AS Version 1.0.3 Regulatory Compliance FCC compliance Information This device complies with part 15 of FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference received. 2. This device must accept any interference received. Including interference that may cause undesired operation. FCC WARNING This equipment may generate or use radio frequency energy.
