FB755AC-F & FB755AS-F User Guide Version 1.1 9 Preliminary Product Components 9 Preliminary Product Components The preliminary value of product is set as on the
. Please be sure of basic set value and so on before using the product. Type Set Value Device Name FB755vx.x.FB755AC-F & FB755AS-F User Guide Version 1.1 10 Connecting the wireless section of Bluetooth 10 Connecting the wireless section of Bluetooth In order for Bluetooth devices to transmit data to each other, the wireless section of Bluetooth should be connected to each other. To connect the wireless section, you should set each role for each device, one for a MASTER, another for a SLAVE. It takes about 1~10 sec that a Master is connected to a Slave.
FB755AC-F & FB755AS-F User Guide Version 1.1 10 Connecting the wireless section of Bluetooth 1 COM PORT : Select Serial port of PC connected a product. 2 DEBUG CHAR : Default is 0x02. (Refer to the appendix A about PC Configuration) 3 DEVICE COUNT : Select number of devices to be connected. (Default 1) (4) Click the Set-up Start Button( Blue borders) after setting each values in blanks ( Red borders N.1 - Com Port connected to FB755AX, N.
FB755AC-F & FB755AS-F User Guide Version 1.1 10 Connecting the wireless section of Bluetooth (6) Check the blinking of status LED on interface board. (7) Remove the interface board of the 1st FB755AC-F& FB755AS-F from the serial port of PC. (On the state of power ON) (8) Connect the interface board of the second FB755AC-F & FB755AS-F to the serial port of PC and switch ON. (The selection switch of environment setting/bluetooth shall be in OFF.
FB755AC-F & FB755AS-F User Guide Version 1.1 10 Connecting the wireless section of Bluetooth (10) Click Set-up Start ( blue borders) button after setting each value ( red borders N.1 - Com Port connected to FB755AX, N.2 - 0x02) in blanks. (11) If the Status Display of Procedures ( N.1 red borders) turns red into green, Connection Set-up is completed.
FB755AC-F & FB755AS-F User Guide Version 1.1 11 How to complete PC Configuration? 11 How to complete PC Configuration? The following PC Configuration shall be explained on the assumption that FB755AC-F & FB755AS-F is connected with PC Interface Board(Jig board). If it is connected to MICOM, then you can change the set value by using AT command language with reference to Attachment AT command language.
FB755AC-F & FB755AS-F User Guide Version 1.1 11 How to complete PC Configuration? 1 DEBUG CHARACTER : Default is 0x02. (refer to the appendix A about PC Configuration) 2 SERIAL PORT : COM PORT proper port, BAUDRATE 9600, PARITY BIT None, STOP BIT 1 1 SERIAL OPENED, READ TO SET : BTConfig tool and communication status of products.
FB755AC-F & FB755AS-F User Guide Version 1.1 11 How to complete PC Configuration? (5) If the comes up, set each blank (Red borders N.1~2) to (COM PORT – Port connected to FB100AS, BAUDRATE – 9600, PARITY BIT – None, STOP BIT – 1). After the set-up, click the OPEN button (Red borders N.3), then Serial Connection and Ready To Set (Red borders N.1) parts become green as shown on If they don’t become green, check the COM PORT and execute BTConfig tool once again.
FB755AC-F & FB755AS-F User Guide Version 1.1 11 How to complete PC Configuration? 1 WRITE PARAMETERS: Save the currently set values. 2 RETURN TO READ: Set to the initial value. Note : Please refer to the appendix A of PC Configuration for the detailed description. 11.2 PC Configuration using Serial Communication (Hyper Terminal) Program 11.2.
FB755AC-F & FB755AS-F User Guide Version 1.1 11 How to complete PC Configuration? (2) Execute in the order of [start][All Programs][Accessories][Communications][Hyper Terminal], then connection window will appear on which enter appropriate name and click. (3) When the comes up, select the COM port connected to FB755AX, and clicks the OK button.
FB755AC-F & FB755AS-F User Guide Version 1.1 11 How to complete PC Configuration? (4) When Registration Information Window comes up as on , select Bit per second : 9600, Data bit : 8, Parity : none, Stop bit : 1, Flow control : none, which will execute Hyper Terminal. (5) Basically, the Hyper Terminal does not show the entered character.
FB755AC-F & FB755AS-F User Guide Version 1.1 11 How to complete PC Configuration? character, select [File][Properties] on the Menu, then registration information window will appear shown as on , click the ASCII Setup button. (6) As shown on , Check “Echo typed characters locally” and come out pressing the acknowledge button. Now the Hyper Terminal program setting procedure is completed to use PC Configuration.
FB755AC-F & FB755AS-F User Guide Version 1.1 11 How to complete PC Configuration? Note : At condition, Pressing Reset button for more than 2 seconds will reset all the configured values to the initial status (factory preset status). Following is the order to use the menu. (1) The execution will only be executed by pressing the “Enter” key. (2) The small character “t” will always move to be positioned at upper side of the menu. (3) To move menu, use the number in the end of left side.
FB755AC-F & FB755AS-F User Guide Version 1.1 12 Approval Information 12 Approval Information 12.1 MIC – FB755AS-F 12.2 FCC compliance Information – FB755AS-F This device complies with part 15 of FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference received. 2. This device must accept any interference received. Including interference that may cause undesired operation. FCC WARNING This equipment may generate or use radio frequency energy.
FCC MODULAR APPROVAL INFORMATION EXAMPLES for Manual This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation. CAUTION: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
Validity of using the module certification: In the event that these conditions cannot be met (for example certain laptop configurations or co‐ location with another transmitter), then the FCC authorization for this module in combination with the host equipment is no longer considered valid and the FCC ID of the module cannot be used on the final product.
