FB155BC User Guide Version 2.1 9 Preliminary Product Components 9 Preliminary Product Components The preliminary value of product is set as on the
. Please be sure of basic set value and so on before using the product. Type Set Value Device Name FB155vx.x.FB155BC User Guide Version 2.1 10 Connecting the wireless section of Bluetooth 10 Connecting the wireless section of Bluetooth In order for Bluetooth devices to transmit data to each other, the wireless section of Bluetooth should be connected to each other. To connect the wireless section, you should set each role for each device, one for a MASTER, another for a SLAVE. It takes about 1~10 sec that a Master is connected to a Slave.
FB155BC User Guide Version 2.1 10 Connecting the wireless section of Bluetooth 1 COM PORT : Select Serial port of PC connected a product. 2 DEBUG CHAR : Default is 0x02. (Refer to the appendix A about PC Configuration) 3 DEVICE COUNT : Select number of devices to be connected. (Default 1) (4) Click the Set-up Start Button( Blue borders) after setting each values in blanks ( Red borders N.1 - Com Port connected to FB155BC, N.2 - 0x02, N.
FB155BC User Guide Version 2.1 10 Connecting the wireless section of Bluetooth (5) Status Display of Procedures(N. 1 red borders) turns red into green after Set-up is completed. Click the OK button if the blank of SLAVE Device Value is filled. (N. 2 red borders) (6) Check the blinking of status LED on interface board. (7) Remove the interface board of the 1st FB155BC from the serial port of PC.
FB155BC User Guide Version 2.1 10 Connecting the wireless section of Bluetooth 1 COM PORT : Select the Serial port of PC connected a product 2 DEBUG CHAR : Default is 0x02. (Refer to the appendix A about PC Configuration) (10) Click Set-up Start ( blue borders) button after setting each value ( red borders N.1 - Com Port connected to FB755AX, N.2 - 0x02) in blanks.
FB155BC User Guide Version 2.1 11 How to complete PC Configuration? 11 How to complete PC Configuration? The following PC Configuration shall be explained on the assumption that FB155BC is connected with PC Interface Board(Jig board). If it is connected to MICOM, then you can change the set value by using AT command language with reference to Attachment AT command language.
FB155BC User Guide Version 2.1 11 How to complete PC Configuration? 1 DEBUG CHARACTER : Default is 0x02. (refer to the appendix A about PC Configuration) 2 SERIAL PORT : COM PORT proper port, BAUDRATE 9600, PARITY BIT None, STOP BIT 1 1 SERIAL OPENED, READ TO SET : BTConfig tool and communication status of products.
FB155BC User Guide Version 2.1 11 How to complete PC Configuration? (5) If the comes up, set each blank (Red borders N.1~2) to (COM PORT – Port connected to FB100AS, BAUDRATE – 9600, PARITY BIT – None, STOP BIT – 1). After the set-up, click the OPEN button (Red borders N.3), then Serial Connection and Ready To Set (Red borders N.1) parts become green as shown on If they don’t become green, check the COM PORT and execute BTConfig tool once again.
FB155BC User Guide Version 2.1 11 How to complete PC Configuration? 1 WRITE PARAMETERS: Save the currently set values. 2 RETURN TO READ: Set to the initial value. Note : Please refer to the appendix A of PC Configuration for the detailed description. 11.2 PC Configuration using Serial Communication (Hyper Terminal) Program 11.2.
FB155BC User Guide Version 2.1 11 How to complete PC Configuration? (1) Execute in the order of [start][All Programs][Accessories][Communications][Hyper Terminal], then connection window will appear on which enter appropriate name and click. (2) When the comes up, select the COM port connected to FB155BC, and clicks the OK button.
FB155BC User Guide Version 2.1 11 How to complete PC Configuration? (3) When Registration Information Window comes up as on , select Bit per second : 9600, Data bit : 8, Parity : none, Stop bit : 1, Flow control : none, which will execute Hyper Terminal.
FB155BC User Guide Version 2.1 11 How to complete PC Configuration? (4) Basically, the Hyper Terminal does not show the entered character. To make sure of the entered character, select [File][Properties] on the Menu, then registration information window will appear shown as on , click the ASCII Setup button. (5) As shown on , Check “Echo typed characters locally” and come out pressing the acknowledge button.
FB155BC User Guide Version 2.1 11 How to complete PC Configuration? 11.2.2 How to Use PC Configuration Menu The user may select the menu to change by selecting the given number in front of the left end menu. For example : To change “GO TO BLUETOOTH PARAMETER MENU”, enter : [1][Enter] Note : At condition, Pressing Reset button for more than 2 seconds will reset all the configured values to the initial status (factory preset status). Following is the order to use the menu.
FB155BC User Guide Version 0.1 14 Approval Information 14 Approval Information 14.1 KCC 14.2 FCC compliance Information FCC Information to User This equi pment has been tested and found to com ply wi th the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These lim its are d esigned to provide reasona ble protection against harm ful interfere nce in a re sidential insta llation.
FB155BC User Guide Version 0.1 14 Approval Information This device is intended only for OEM integrators under the following conditions: 1) The transmitter module may not be co-located with any other transmitter or antenna, 2) OEM shall not supply any tool or info to the end-user regarding to Regulatory Domain change. As long as 2 conditions above are met, further transmitter test will not be required.
