FB100AS User Guide Version 1.0 10 Initial Set Value of Products 10 Initial Set Value of Products The product has the initial Set Value as shown on the
. Please be sure to identify the initial Set Value, before you begin to use. TYPE Set Values Device Name FB100AS 1.FB100AS User Guide Version 1.0 11 Bluetooth Pairing 11 Bluetooth Pairing 11.1 Configuration using Dip Switch 11.
FB100AS User Guide Version 1.0 12 How to complete PC Configuration? 12 How to complete PC Configuration? The Baud rate or Role is selectable using Dip Switch. (In case, CONNECTION MODE is not MODE4.) For other setting values, you can establish the setting using PC Configuration. PC Configuration can be performed with two significant ways. First is to use Configuration tool provided by FIRMTECH Co., Ltd. Second is to use the serial communication programs such as Hyper Terminal or Mincom provided by OS.
FB100AS User Guide Version 1.0 12 How to complete PC Configuration? (4) If above appears on the display, select the red lined square 1 ~ 3, and press CONNECT button(red lined square 4), then the Serial Connection, Ready To Set (red lined box 1) will be turned into green color as shown on .
FB100AS User Guide Version 1.0 12 How to complete PC Configuration? (6) Following is to describe the procedures of setting up the config tool. - Upon completion of all setting up, please click WRITE STATUS to store the newly set up values. - To verify if the stored values are correct, just simply click READ STATUS to read out the current PC Configuration stored.
FB100AS User Guide Version 1.0 12 How to complete PC Configuration? (2) Execute in the order of [start]Æ[All Programs]Æ[Accessories]Æ[Communications]Æ[Hyper Terminal], then connection window will appear on which enter appropriate name and click. (3) When the comes up, select the COM port connected to FB100AS, and clicks the OK button.
FB100AS User Guide Version 1.0 12 How to complete PC Configuration? (4) When Registration Information Window comes up as on , select Bit per second : 9600, Data bit : 8, Parity : none, Stop bit : 1, Flow control : none, which will execute Hyper Terminal.
FB100AS User Guide Version 1.0 12 How to complete PC Configuration? (5) (6) Basically, the Hyper Terminal does not show the entered character. To make sure of the entered character, select [File]Æ[Properties] on the Menu, then registration information window will appear shown as on , click the ASCII Setup button. (6) As shown on , Check “Echo typed characters locally” and come out pressing the acknowledge button.
FB100AS User Guide Version 1.0 12 How to complete PC Configuration? 12.2.2 How to Use PC Configuration Menu The user may select the menu to change by selecting the given number in front of the left end menu. For example : To change “DEVICE NAME”, enter : [1]Æ[Enter] Note : When Reset Button is pressed at , all the set up value shall be reset to the initial set up status (factory fix point). Following is the order to use the menu.
FB100AS User Guide Version 1.0 13 Approval Information 13 Approval Information 13.1 KCC 13.2 FCC compliance Information This device complies with part 15 of FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference received. 2. This device must accept any interference received. Including interference that may cause undesired operation. FCC WARNING This equipment may generate or use radio frequency energy.
FB100AS User Guide Version 1.0 13 Approval Information 13.4 TELEC 13.
