Instructions / Assembly

Product model: F8059
Explosion diagram
of lamp structure
HOUSE WIRES
FIXTURE WIRES
OFF
Wiring diagram
Black
White
Black(Llve wire)
White(Neutral wire)
Parts &.Hardware
Included:
Picture Description Qty
Check list
Installation steps
Installation steps are only for indoor installation
1. Carefully disassemble and determine each component to ensure that
everything you are ready to install is placed on a clean surface, such
as a table or floor.
2. Cut off the main power supply of the fuse box or circuit breaker in
the house or building
3. Screw out M4 screws and remove the mounting bracket
4. Use 8/32 screws to fasten the mounting bracket to the socket box.
5. Use a Phillips screwdriver (not provided) to screw out the M4 screw
on the bracket.
6. Connect the wire from the clamp to the power wire from the outlet box
and cover. Screw the neutral wire of the lamp and the neutral wire on
the outlet box together, and screw the live wire of the lamp and the
live wire on the socket box together with the wire cap. Remove the
grounding wire from the clamp and socket box, and put them under the
head of the green screw on the mounting bracket.
7. Carefully plug all wires into the socket box.
8. Insert the lamp panel into the bracket fixed on the wire box, make
the head of M4 screw pass through the hole of the lamp panel, and fix
the lamp by tightening.
9. Tighten the lampshade teeth to the lamp head teeth, and install the
E26 bulb (excluding). 10. Turn on the power supply to test the light.
Save these instructions for future use. If the lamp does not work, you
can contact our customer service team to solve the problem.
Maintenance method
Clean the water wave with a soft dry cloth or an electrostatic duster
Avoid the use of harsh chemicals and abrasives to clean the fixture and
smooth the surface treatment.
Safety precautions
Your lamp is in the water, which will damage the circuit.
After sales problems can be contacted on the platform order page
We hope you like your new lighting as much. If your project meets or
exceeds your expectations, we will be honored. If you write a comment
to us, sharing your experience can help others and other customers
understand your ideas. We really appreciate your support in making
money.
A
B
C
D
E
F
G
H
I
J
3
Terminal cap
1
Mounting bracket
2
M4 * 20 self
tapping screw
M4 * 15 flat
angle screw
After installation, the finger mold and sweat stains left on
the metal and crystal surface of the lamp body can be cleaned
with a soft dry cloth or an electrostatic duster.
1
Mainline of
power supply
2
Lock wire
iron piece
ground wire
A
B
C
D
E
F
G
H
I
J
E26 LED light source
(not included)
2
1
∅ 110 * 25
lamp panel
1
∅ 50 * 25
lamp cover
1
E26 lamp cap
1
Acrylic
lampshade