wireless in stant networks™ Installation and User Guide HotPoint 1000R Outdoor Wireless Mesh Router
Installation and User Guide Page 2
HotPoint 1000R Outdoor Wireless Mesh Router Installation and User Guide HotPoint 1000R Outdoor Wireless Mesh Router Copyright Notice © 2003-2004 Firetide, Inc. All rights reserved. Trademarks Firetide, the Firetide logo, Wireless Instant Networks, HotPoint are trademarks of Firetide, Inc. All other trademarks are the property of their respective owners. FCC Class B Notice This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1.
Installation and User Guide Table of Contents Firetide™ HotPoint™ 1000R Outdoor Wireless Mesh Router ........................................................5 Firetide Wireless Instant Network.....................................................................................................6 What is a Firetide Mesh Network?....................................................................................................6 Building a Firetide Mesh Network..................................................
Installation and User Guide Firetide™ HotPoint™ 1000R Outdoor Wireless Mesh Router The Firetide HotPoint 1000R outdoor wireless mesh router brings all of the benefits of Firetide’s instant mesh networking to outdoor and long range applications. With its extended operating range and NEMA 4 certified enclosure, this rugged version of Firetide’s HotPoint wireless mesh router enables mesh networks to operate in outdoor environments and to span great distances for both rural and metro applications.
HotPoint 1000R Outdoor Wireless Mesh Router Firetide Wireless Instant Network Firetide developed the Wireless Instant Network, based on the HotPoint Wireless Mesh Router, to enable faster, easier and more affordable network deployment. Firetide’s patented mesh networking technology makes it possible to survey, plan and deploy an entire network in less than one day rather than weeks. The Firetide network is also portable.
Installation and User Guide scalable, and flexible. They are very portable and can adapt well to many different physical environments. Building a Firetide Mesh Network Installing, expanding, or even relocating a Firetide Mesh network is easy and fast. Simply place a HotPoint router wherever you need an Ethernet port and connect it to an AC power source. As long as the HotPoint router is within operating range of other HotPoint routers, you can connect and operate your network devices immediately.
HotPoint 1000R Outdoor Wireless Mesh Router For best results, position the HotPoint 1000R antenna above obstructions. Create a Mesh Topology for Maximum Performance and Reliability Unlike simple point-to-point bridging, Firetide provides true mesh networking with flexible and redundant paths. This improves overall performance, allows the network to be extended over long distances, and reduces the chance of single point failures.
Installation and User Guide Although this software is not required for installing or operating your network, the HotPoint Manager software provides an easy way to monitor and manage the mesh and your HotPoint routers. Because wireless connections between HotPoint routers are invisible, this software lets you “see” which units are within direct range of each other. HotPoint Manager also provides additional security and optional configuration features. You can download the software from the Firetide web site.
HotPoint 1000R Outdoor Wireless Mesh Router HotPoint 1000R Installation Be sure to read and understand all installation instructions and safety instructions before proceeding with the installation. Unpacking The HotPoint 1000R Outdoor Wireless Mesh Router package contains the following items. If you are missing any of these items, contact your Firetide reseller.
Installation and User Guide • 3 meter, shielded, straight-through, one-side watertight, one-side non-watertight, RJ-45 to RJ-45 CAT 5e Ethernet patchcord with black cable jacket suitable for industrial applications/low smoke, zero halogen. Ethernet Crossover Cable • 1meter, RJ-45 to RJ-45, Ethernet patch cord for restoring default settings.
HotPoint 1000R Outdoor Wireless Mesh Router WARNING! IMPORTANT SAFETY PRECAUTIONS The HotPoint 1000R outdoor wireless mesh router must be installed by a qualified professional such as a licensed electrician. Failure to install this equipment properly may result in equipment damage and personal injury or death. Carefully observe these instructions and any special instructions that are included with the equipment you are installing.
Installation and User Guide Mounting the Enclosure The HotPoint 1000R enclosure should be mounted securely to a wall or a pole approximately 2” (51 mm) in diameter. Mounting Guidelines • For best results, the mounting location should enable maximum performance of the antenna and any attached devices such as access points or cameras. Whenever possible, provide clear line-of-sight access for the antenna.
HotPoint 1000R Outdoor Wireless Mesh Router Mounting the Antenna The antenna consists of an antenna shaft with an attached coaxial cable and a mounting tube. Remove the set screw that secures the antenna shaft to the tube and separate the two components Note: The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.
Installation and User Guide Connecting to Earth Ground • Warning! The HotPoint 1000R must be properly connected to earth ground. Failure to do so may result in equipment damage, injury or death. The product warranty does not cover damages resulting in part or in whole from improper grounding. The HotPoint 1000R outdoor mesh router has an external, threaded grounding post at the base of the enclosure.
HotPoint 1000R Outdoor Wireless Mesh Router Power Connections There are two options for supplying power to the HotPoint 1000R outdoor mesh router. Option 1. Remote Power Module The remote power module provides power to the HotPoint 1000R enclosure from an indoor AC outlet. You can also plug an optional power over Ethernet (PoE) injector into the module to power a peripheral device connected to the second (rightmost connector) HotPoint 1000R Ethernet port.
Installation and User Guide Ethernet Ports The HotPoint 1000R outdoor mesh router has two weatherproof Ethernet ports to provide Ethernet connectivity to outdoor peripheral devices such as access points or surveillance cameras. Use of these ports is optional. Power over Ethernet (PoE) Ethernet port 1 (center connector) supports PoE for powering the HotPoint 1000R outdoor mesh router from a peripheral device attached to this connector.
HotPoint 1000R Outdoor Wireless Mesh Router HotPoint Manager™ Software The HotPoint Manager software provides a convenient, browser-based interface for monitoring all of the HotPoint routers on your mesh network. HotPoint Manager is a Java-based application compatible with most Internet browsers and platforms including Windows, Macintosh, UNIX, and Linux. Registered users can download the HotPoint Manager software and user documentation from the Firetide web site (www.firetide.com).
Installation and User Guide For Windows XP 1. Click on the Start button. 2. Click on the Control Panel icon. 3. Double-click on the Network Connections icon. 4. Double-click on the Local Area Connection icon for the network adapter used to connect to the Firetide mesh network. 5. Select Internet Protocol (TCP/IP) and click on the Properties button. 6. Select “Use the following IP address” and enter the following information: • IP address: 192.168.224.200 • Subnet mask: 255.255.255.0 7. Click OK to finish.
HotPoint 1000R Outdoor Wireless Mesh Router Troubleshooting and Support Information As a Firetide customer you are entitled to receive free support services on our web site and from your authorized Firetide dealer. Troubleshooting The best way to troubleshoot individual HotPoint routers and your entire Firetide mesh network is to use the HotPoint Manager software.
Installation and User Guide Restoring Default Settings You can change or restore the default settings for your HotPoint router using the HotPoint Manager software. You can also use the following procedure to restore the factory default settings without HotPoint Manager. 1. Connect an Ethernet crossover cable between both Ethernet ports. 2. Plug in the HotPoint power adapter and wait for red “fault” LED to turn on and then off. 3. Unplug the HotPoint power adapter and disconnect the crossover cable.
HotPoint 1000R Outdoor Wireless Mesh Router HotPoint Accessories Consult your Firetide dealer or the Products section of www.firetide.com for a current list of available accessories. Accessories, components and additional HotPoint wireless mesh routers are available directly from your Firetide dealer.
Installation and User Guide Specifications Model HotPoint 1000R Outdoor Wireless Mesh Router Protocol Topology Broadcast based on Reverse-Path Forwarding (TBRPF) Encryption AES, RSA certificates; Wireless: WEP Radio range (open environment) Up to 2 miles (3.22 km) Wireless interface • IEEE 802.1lb compliant (backhaul) • Radio Tx Power: 200mW • Modulation: DSSS • Data Rates: 11, 5.5, 2, 1 Mbps • 8.
HotPoint 1000R Outdoor Wireless Mesh Router FreeBSD Copyright All of the documentation and software included in the 4.4BSD and 4.4BSD-Lite Releases is copyrighted by The Regents of the University of California. Copyright 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994. The Regents of the University of California. All rights reserved. Redistribution and use in source and binary forms, with or without modifi cation, are permitted provided that the following conditions are met: 1.
Installation and User Guide This product may also incorporate source code copyrighted by the following FreeBSD Developers: Shunsuke Akiyama, Jose M. Alcaide, Doug Ambrisko, Will Andrews, Eric Anholt, Mathieu Arnold, Sergey Babkin, Daniel Baker, John Baldwin, Duncan Barclay, Mike Barcroft, Doug Barton, Anton Berezin, Pierre Beyssac, Andrzej Bialecki, John Birrell, Neil Blakey- Milner, Martin Blapp, Torsten Blum, Maxim Bolotin, Hartmut Brandt, Oliver Braun, Jonathan M.