Instructions / Assembly

Tools needed for assembly (NOT included): Philips Head Screwdriver

Assembly Time: 10 minutes

Step 1:

Place front piece of Plastic Bracket (A or A and B) on pole. Align holes in the top of the Dimmer Switch

Module with the holes in the front piece of Plastic Bracket. Insert 2 - M5*70 bolts through holes. Then attach

the back piece of the Plastic Bracket (A or A and B) onto the M5*70 bolt and secure to the pole by tightening

2 - M5 nuts onto the end of the M5*70 bolts. Repeat with the second set of Plastic Brackets (A or A and B.)

INSTRUCTIONS AND PACKAGE CONTENTS ITEM 61708

ASSEMBLY

PART

DESCRIPTION

QTY

*Plastic Brackets for 3" Center Pole

(front piece and back piece)

*Plastic Brackets for 2.5" Center Pole

(front piece and back piece)

Hardware (4 - M5*70 bolts/4 - M5 nuts)

Dimmer Switch Module

*NOTE: You will use Part B assembled inside of Part A

for use on the 2.5" Pole.

PAGE 1
INSTRUCTIONS AND PACKAGE CONTENTS ITEM 61708 ASSEMBLY PART A B DESCRIPTION *Plastic Brackets for 3" Center Pole (front piece and back piece) *Plastic Brackets for 2.5" Center Pole (front piece and back piece) QTY 4 4 C Hardware (4 - M5*70 bolts/4 - M5 nuts) 8 D Dimmer Switch Module 1 *NOTE: You will use Part B assembled inside of Part A for use on the 2.5" Pole.
PAGE 2
Step 2: Once the Dimmer Switch Module has been secured to the pole, plug the cord from the Infrared Heater into the Dimmer Switch module. Then to use the Infrared Heater, plug the Dimmer Switch module cord into a wall outlet. This appliance must be used with an outlet that has been installed and grounded in accordance with local codes and ordinances. Make sure the appliance is connected to an outlet having the same configuration as shown in the figure below. DO NOT use an adapter with this product.
PAGE 3
Distributed By: Well Traveled Living 716 S 8th Street Amelia Island, FL 32034 Toll Free: 866-WTL-SUPP (866-985-7877) Web: www.wtliving.com Email: cservice@welltraveled.net 1 YEAR LIMITED WARRANTY – Customers in the Continental US All components are warranted for a period of 1 year after date of purchase by the original owner against defects in materials and workmanship under normal use.