User's Manual

IN THE PACKAGE
※ To improve the performance of the device, the contents of this manual are subject to
change without prior notice.
[ MAIN UNIT ] [ REAR CAMERA ]
[ CIGAR JACK POWER CABLE ][ EXTERNAL GPS ANTENNA ] [ POWER CABLE ]
[ MOUNT ] [ MICRO SD CARD ]
KEY FEATURES SPECIFICATIONS
ITEM SPEC. REMARKS
FineVu LX2000Model Name
Excluding cables and cradle.
Front : 98.5 x 60.9 x 31.0mm / 96g
Rear : 53.4 x 29 x 42.3mm / 30g
Dimension /
Weight
Front : 155° / Rear : 140°Viewing Angle
Front : Full HD 1920x1080@30fps
Rear : Full HD 1920x1080@30fps
Resolution
AVI (2Video-1Audio)
Video : H.264 / Audio : PCMEncoding
3.5” IPS LCD (800x480) with touchDisplay
Built-inMic.
Built-inSpeaker
8 ohm
3-Axis Acceleration G-SensorAcceleration Sensor
DC 12V - 24VInput Voltage
Based on 2CH, LCD off, GPS off
Built-in Super CapacitorBackup Battery
3.5WPower Consumption
Operation Temperature : -10℃ ~ 60℃ (14℉~140℉)
Storage Temperature : -20℃ ~ 70℃ (-4℉~158℉)
Temperature
Full HD wide angle lensLens
Front/Rear : 2M pixels CMOS Image SensorImage Sensor
Driving recording mode
Event (impact) recording mode
Emergency recording mode
Parking (impact & motion detection) recording
Driving time lapse recording
Parking time lapse recording
1 min. interval recording
20 sec. recording (5 sec. before / 15 sec. after impact)
20 sec. recording (5 sec. before / 15 sec. after impact)
20 sec. recording (5 sec. before / 15 sec. after impact)
30fps recording after impact detected
30fps recording after impact detected
Recording
Mode
Power Port(3.5 Ø), Rear Camera Port (2.5 Ø), External GPS Port(2.5 Ø)Interface
MLC, Class10 or above recommended /
SDXC compatible
Memory
Capacity
Micro SD Card (16G/32G/64G)
[ USER MANUAL ]
SAFETY INSTRUCTIONS
[ REAR CAMERA CABLE ]
Insert the MicroSD card into the slot
and push it until locks into the place.
Install the External GPS Antenna on
the upper left or right corner of
the windshield.
It is strongly recommended that FineVu memory cards are used to minimize memory
card error.
·
Do not apply excessive force on the MicroSD card or attempt to insert it in the wrong
direction as it may cause damage to the MicroSD card and the card slot.
·
To prevent loss of important data, frequently copy recorded videos from MicroSD card to
another storage device such as personal computer for back up.
·
Speaker
For voice guidance and
alert/notification sounds.
LCD Screen
Front Camera Lens
Front facing camera for
video recording.
Security Lighting
PRODUCT OVERVIEW
Power LED
Indicates power
status of the device.
Cradle
For attaching to rear windshield.
INSTALLATION
Connect the main unit and the mount.
Plug the hardwiring
Power Cable into
fuse box of the vehicle.
(In case of using Cigar Jack
Power Cable (optional),
plug into a 12V DC
vehicle power socket.)
Attach the adhesive side of
the mount on
the windshield.
Connect the power cable to
DC-IN socket of the device.
1
2
3
ADAS PLUS (Advanced Driver Assistance Systems)
The Lane Departure Warning System (LDWS) and Front Vehicle Motion Alert (FVMA)
ensure driver safety with warnings of voice and alert on LCD screen.
3.5” IPS Touch LCD
Get an instant video playback, ADAS warnings and change settings on super
clear high resolution (800x400) IPS LCD.
Wide Viewing Angle
A wide view of diagonal 155° angle minimizes blinds spots to assure recording of all
events without fail.
Secret Mode
Protect your important video proof with password, only you can access to FineVu by
secret mode.
Format Free Max
The most advanced format free technology of FineVu eliminates the need for
periodical manual formatting of micro SD memory card, extending memory card
life and improving reliability.
Event Notice
When you get in the car, FineVu notices event history that is detected during parking
surveillance mode, making it easy to check the number of impact while parking, and
if your car has been safe overnight and what happened.
Auto Night Vision
Automatically to tune and enhance the video quality according to the brightness of
light in any environment.
Smart Time Lapse
Automatically reduces the recording file size and increases memory efficiency by 50%
on average when there is no impact, and saves the files at 30 frames per second
when detects any impact.
Dual Full HD resolution
Front & Rear Full HD (1920 x 1080 @30fps) cameras record outstanding video
clarity under any circumstance.
4
2
Connect the rear camera and
the rear camera cable.
1
Adjust the camera’s vertical angle.
Attach the adhesive
side of the cradle
on the rear
windshield.
3
Connect the main
unit and rear camera
cable.
Rear Camera Connector
Connects to rear camera
DC-IN
Connects to power
cable (DC12V/24V)
Mount Connector
Connects to the windshield mount.
GPS Connector
Connects to external GPS.
Memory Card Slot
Microphone
Record audio along with
the video.
Power Switch
Turn the device on/off.
REC LED
Indicates recording
status.
Main unit and front camera
Rear camera
Rear cmera
Front Camera
Installing Micro SD Card and External GPS Antenna
Rear Camera Connector
Connects to main unit. (Video and power I/O)
Security LED
Visually indicates that the vehicle
is equipped with dash cam which is in operation.
4
* Optional Accessories
Rear Camera Lens
Rear facing camera for video recording.
•Do not use damaged, modified, or unauthorized parts and accessories.
•Use the device within the rated voltage range.
•Make sure the power cable is connected to the cigarette lighter socket or
a proper terminal in the fuse box.
•Ensure the power cable plug is inserted to the right power inlet on the
device tightly.
•Place the external GPS about 20cm (8 inch) or more away from the device.
•Do not install the device at the location where it obstructs the driver’s view.
Precautions for Installation
Precautions for use
•Do not operate the device while driving.
•Avoid placing the device near from flammable and explosive liquids
or gases. This may cause explosion or fire.
•Avoid putting metal, flammable or wet objects into the memory card
slot or the connectors on the device. This may cause electric shock or fire.
•Avoid using the device under extreme conditions such as direct sunlight,
high temperature and/or high humidity.
•Do not operate the device with wet hands. It can cause electric shock.
•Do not leave the device or its accessories within reach of children.
•Do not cover the device with a cloth or a blanket while in use.
Continuous heating may cause fire or device failure.
For user’s safety and to avoid property damages, read through this manual and
follow the instructions correctly.
Finedigital is NOT responsible for any problems and/or damages that may occur
from the failure to observe the instructions.
·
FCC Compliance Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined
by turning the equipment off and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changed or modifications not expressly approved by the party responsible for compliance
could void the user`s authority to operate this equipment.
A digital device that is marketed for use in a residential environment notwithstanding use in commercial,
business and industrial environment.
Examples of such devices included, but are not limited to, personal computers, calculators, and similar
electronics devices that are marketed for use by the general public.
FCC ID : PWS-FINEVULX2000
Limited Warranty
This device is guaranteed against manufacturing defects for one(1) year(six(6) months for battery
and accessories) from the original date of purchase.
Finedigital's sole obligation in the event of such defects during this period is to repair or replace
the defective part or device with a comparable part or device at Finedigital's sole discretion.
Except for such replacement, the sale, or other handling of this device is without warranty,
condition or other liability even though the defect or loss is caused by negligene or other fault.
Damage resulting from use, accident, or normal wear and tear is not covered by this or any warranty.
Finedigital assumes no liability for any accident, injury, death, loss or other claim related to or
resulting from the use of this device. In no event shall Finedigital be liable for incidental or
consequential damages relating to or resulting from the use of this device or any of its parts.
Finedigital is not liable for the costs of installing and removing the device and its accessories
regardless of the warranty period.
WARRANTY
7th Floor, Fine Venture Bldg., 41, Seongnam-daero 925 beon-gil, Bundang-gu, Seongnam-si,
Gyeonggi-do, 13496 Rep. of KOREA
www.finevu.com | Customer Support : [e-mail] | Made in Korea
KC (R-R-FDK-FineR018), FCC (PWS-FINEVULX2000)
Certificate