EXCITE LR TLS TER DR LL ETL a FIXTURES Phone: 718.602.6060 | E-mail: LUA gle LED BATHROOM MIRROR INSTALLATION INSTRUCTION (Suitable for the touch switch products installation by hanging bar or hardy hold) FOR MODELS: # MLEC1818 # MLEC2424 # MLEC3030 # HIMMLER # HIMMLER # MLER2424 # HIMMLER # MLER4824 # HIMMLER # MLER3030 # MLER3036 # MLER6030 ran was HH Notes: to ensure the normal use of products, it is required set out wires as per the regulations of IEE at the installation places.
® FINE LJP ei EXCITE LR TLS TER DR LL ETL a [LEMUEL XL ETO LUA gle A / Hanging bar Installation Manual (Instruction for LED bathroom mirror) Please choose portrait or landscape Horizontally level the hanging bar. installation method first. Py, Mark on the wall the hanging bar holes. Install the expansion plug in to the holes, Drill the holes. ) Screw the hanging bar to the wall tightly. \ INPUT WIRING DIAGRAM LUMINARY MAIN SUPPLY Brown/Black © ve ® Brown/Red/ Black Yellow green/ GES Yellow green/ Green Gree
@ FINE Address: 206 Assembly Road New Windsor, NY 12553 @® FIXTURES Phone: 718.602.6060 | E-mail: LAL glx B / Hardy Holes Installation Manual (Instruction for LED bathroom mirror) (vesper it ion moth) Back of the mirror Choose portrait or landscape 2. installation method first. Lever ruler horizontal. Measure the distance between the 2 holes. Py, L Mark the distance between the holes on the wall. Install the expansion plug in to the holes, Drill the holes.
@® FIXTURES Thane: 718.602.6060 | E-me RTI rey LUA gle | @ FINE Address: 206 Assembly Road New Windsor, NY 12553 . (0) Touch switch, Press-hold for color change ose amy SCREW D& EXPANSION PLUG HANGING BAR Installation Tools Needed —~S Ol =) MEASURE TAPE LEVEL DRILL SCREWDRIVER HAMMER Ne a . Please do not use if the product have any lost or broken pieces. . During installation, never put sharp or pointy materials against mirror surface. Otherwise it may result in leakage or personal injury. .