206 wembly Road. New Windsor, NY 12553 Phone: 718.602.6060 Fax: 718.963.2082 info@finefixtures.com www.finefixtures.
06 wembly Road. New Windsor, NY 12553 Phone: 718.602.6060 Fax: 718.963.2082 info@finefixtures.com www.finefixtures.com READ ALL INSTRUCTIONS BEFORE UNPACKING THE PRODUCT Instructions that, if ignored could result in death or serious injury caused by incorrect handling or installation of the product. These instructions must be observed for safe installation. tools required for installation supplied parts A Medicine Cabinet B Ancor C Screws D Wall Mounted 1. Tape Measure 2. Drill 3. Drill Bit 4.
206 wembly Road. New Windsor, NY 12553 Phone: 718.602.6060 Fax: 718.963.2082 info@finefixtures.com www.finefixtures.com SURFACE MOUNT: POSITIONING AND INSTALLATION OF MIRROR CABINET: 1 2 D A A Verify required clearances. Determine the desired location of the cabinet. It is recomended that the cabinet is being installted 3” above the faucet. 3 Drill hole “A” and “B” with ¼” bit, insert the anchors cB . Secure the bracket with screws C , ensuring that it is level.
206 wembly Road. New Windsor, NY 12553 Phone: 718.602.6060 Fax: 718.963.2082 info@finefixtures.com www.finefixtures.com 5 6 7 H B I C E Drill a hole on the wall for bottom bracket Ee, Insert anchors and install the bracket with screw, installted 3” above the faucet. Choose the position for your shelves, then H into place. push and twist the Clips (H A I . Fill remaining holes with Pegs (I) B Push a side of the shelf into left or right clip.
206 wembly Road. New Windsor, NY 12553 Phone: 718.602.6060 Fax: 718.963.2082 info@finefixtures.com www.finefixtures.com RECESS MOUNT: POSITIONING AND INSTALLATION OF MIRROR CABINET: 1 2 3 A Remove the both of side mirror with screwdriver. 4 Frame the cutout opening. 1 Draw the perimeter of the medicine cabinet. 4 steps to frame the cutout opening Cutout Opening Place and hold the cabinet in the cutout opening.
206 wembly Road. New Windsor, NY 12553 Phone: 718.602.6060 Fax: 718.963.2082 info@finefixtures.com www.finefixtures.com 6 5 C 7 I H Cut the marked perimeter with the appropriate tool. The top and the bottom holes are for ressesing installation 1. Level, then secure the cabinet with screws C through the mounting holes into the framing studs. 2. Choose the position for your shelves, then push and twist the Clips (H H into place. A Fill remaining holes with Pegs (I)I .