Panel Heaters 25 - 50 - 100 - 150 250 - 400 W Drying kilns 7H SЕRIES Hoists and cranes Road / tunnel lighting Plastic moulding machines Automatic car-washes Panels for electrical distribution Control panels Forced-air ventilators
FINDER reserves the right to alter characteristics at any time without notice. FINDER assumes no liability for damage to persons or property, caused as a result of the incorrect use or application of its products.
7H SERIES Panel Heaters 25 - 50 - 100 - 150 W 7H SERIES 7H.51.0.230.0025 Panel heaters 7H.51.0.230.0050 Type 7H.51.0.230.0025 - Heating power 25 W Type 7H.51.0.230.0050 - Heating power 50 W • Nominal voltage (110...230)V AC/DC • Safe touch • PTC resistor, self regulating heating system • Clip for 35 mm rail (EN 60715) mount • Heating power 25 W • Nominal voltage 7H.51.
7H SERIES 7H SERIES Panel Heaters 25 - 50 - 100 - 150 W 7H.51.0.230.0100 Panel heaters 7H.51.0.230.0150 Type 7H.51.0.230.0100 - Heating power 100 W Type 7H.51.0.230.0150 - Heating power 150 W • Nominal voltage (110...230)V AC/DC • Safe touch • PTC self regulating heating system • Clip for 35 mm rail (EN 60715) mount • Heating power 100 W • Nominal voltage 7H.51.
7H SERIES Panel Heaters 250 - 400 W 7H SERIES Panel heaters fan assisted 7H.51.8.230.0250 7H.51.8.230.0400 • Heating power 250 W • Nominal voltage 230 V AC • Fan assisted • Heating power 400 W • Nominal voltage 230 V AC • Fan assisted Type 7H.51.8.230.0250 - Heating power 250 W Type 7H.51.8.230.0400 - Heating power 400 W • Nominal voltage 230 V AC • Safe touch • PTC resistor, self regulating heating system • Fast wiring terminals • Clip for 35 mm rail (EN 60715) mount 7H.51.
7H SERIES Panel Heaters 7H SERIES Ordering information Example: 7H series, Panel heaters, heating power 50 W, 110…230 V AC/DC. 7 H . 5 1 . 0 . 2 3 0 . 0 0 5 0 Series Type 51 = Panel heaters safe touch Supply version 0 = AC (50/60 Hz)/DC 8 = AC (50/60 Hz) only fan assisted version Supply voltage 230 = 110…230 V 230 = 230 V only fan assisted version Heater power 0025 = 25 W 0050 = 50 W 0100 = 100 W 0150 = 150 W 0250 = 250 W 0400 = 400 W General data Terminals stranded cable 2 x 1.5 2 x 1.
H SERIES Panel Heaters 7H SERIES Wiring diagrams NOT Fan assisted versions AC version DC version SAFETY NOTE For reasons of safety and performance , heaters must be mounted in the following way: 1. keep a distance of 100 mm. from components above and below and of 60 mm from side components 2. install vertically (cables below heater) in the bottom part of cabinet 3. do not mount heaters over easily inflammable materials 4. do not operate in corrosive ambient air WARNING Do not cover the heater. The 7H.
7H SERIES 7H SERIES Panel Heaters Outline drawings Type 7H.51.0100 Screw terminal Type 7H.51.0150 Screw terminal G IV-2020, www.findernet.com Types 7H.51.