Quick Start Guide

12
:
34
pm
USING YOUR
For further questions or
support, please contact
customer service on:
when purchased through
Find-me Technologies
[phone] or
admin@ndmetech.com.au
or contact your distributor
ONLINE CLIENT CONSOLE
on their K.I.T. This will send an acknowledgment to the
emergency contacts that have opted in to receiving this kind
of alert.
All reminders in this tab allow the exibility to have the
reminders only set for certain days of the week, or to have
the reminders carried across for all days.
SECURITY
Your K.I.T has the ability to operate in Security
Mode. This is designed for those that are
working alone or in vulnerable situations.
By operating in Security Mode, when the black SOS
button is pressed it will call the SOS number in one-way
communication. This allows the receiver of the call to
hear what is happening, but not to iname the situation.
There is also the option to have the device vibrate as added
conrmation.
CHECK-IN / CHECK OUT
The security tab also allows you to set a Check In and Check
Out time. If this option is set, when the wearer enters a
location they will need to press the bottom silver button twice
to Check In. If they have not hit the bottom silver button twice
by the time that is set to Check Out, the Emergency Contacts
can be set to receive a call, an SMS and/or email providing
their location and that they may need assistance. There is a
5 minute vibrate reminder before the checkout time elapses
that you can extend the time by pressing the bottom silver
botton once.
ALERT CONTACTS
This tab allows you to manage who and how
each emergency contact will receive an alert.
The top section is who your SOS call will go to
when you press the SOS button.
You can choose a family member or friend, an organisational
representative or our 24/7 monitoring centre. Whomever
you choose, please make sure that they are available for you
when you need assistance.
You can also choose to set the SOS button to be enabled
or disabled. You may wish to disable it if the wearer has
a condition that makes them prone to pushing buttons,
resulting in a high level of false alerts.
The section below the emergency contact allows you to
choose who will receive an alert via SMS, email or both and
the type of alerts that you wish to receive.
You can easily turn off when you wish to receive the alerts
(eg: a manager or care worker with two days off can opt
not to receive the alerts and when back on shift quickly opt
back in).
GENERAL SETTINGS
This is the hub of how you want your K.I.T to
act and who you would like the two silver (non
emergency) buttons to call. Remember it is
important after each change to hit set and see
the pop up notication advising that your K.I.T
has accepted that change before making the next change.
Upload a photo of the wearer to make it easier to see who
you are making the change for next time you are logged in. It
is also helpful to assign the wearer a unique colour for their
pin. This is helpful if you are managing multiple units and
using the multi view feature.
You can choose if you would like your K.I.T to accept all calls,
or reject all calls. If you select reject all calls, your K.I.T
will reject all calls except from your VIP numbers that are
entered. Your K.I.T will recognise these VIP numbers and
auto answer when they ring.
For Wi-Fi settings please use the Wi-Fi that your K.I.T will be
based at. This is usually your home or workplace.
Use this tab to enable your fall sensor and adjust the fall
sensitivity of your K.I.T.
You can also use this tab to enable the non-movement
sensor which can be handy to determine if someone has
removed their K.I.T and not placed it on the charger.
Please revert to this tab often and check if there are any
software updates for your K.I.T. Your K.I.T will need to be in
their approved Wi zone, turned on and on the charger to
apply the update.
Night View is an option if you prefer to see your Client
Console in a darker colur scheme.
Time setting is located on this page allowing change to and
from 12 to 24 hour format.
VIBRATION
Vibration can be enabled or disabled via the Vibration Option tab.
ADMINISTRATOR*
The administrator feature is designed so you can
quickly adjust and view the frequency your K.I.T
is locating the wearer as well as nd important
information such as the IMEI number
(International Mobile Equipment Identity). You
can also request a report of settings you have set so you can
quickly view the options you selected for the wearer.
MULTIVIEW*
When you are managing multiple watches you
will have access to a multiview page. Use this
page to create groups of people you would like
to see all at once on the location map to make it
easier to manage.
*Not all K.I.T users will have access to these features.
Note: You can use Google translate found on the bottom left
corner to change the language of the portal.
GETTING TO KNOW ME
All customised settings for the chosen K.I.T can be accessed
and changed from the General Settings page.
The top horizontal bar allows you to locate the wearer, see the
GPS sync time, switch to view the history for the wearer. This
bar also displays a dashboard of whether the selected K.I.T is
on, if it is on the charger, and if it is in Security Mode.
Firstly, make sure that the main panel in the horizontal bar is
displaying the K.I.T that you wish to change. You can include
a photo for this K.I.T and select the colour in the General Tab
of the collapsible Settings Menu. If you manage multiple K.I.T
units you can select the one you wish to make changes to from
this panel.
All of the settings for your K.I.T are completely customisable
to suit the wearers needs and can change as their needs
change. Expand the settings menu by hovering over the K.I.T
icon in the left corner of the horizontal bar. Spend some time
navigating the tabs. Please read the Features part of this guide
to understand more about the various features available to you.
Note: The expandable settings menu may look different
depending on your level of authority. This level of authority
is often used if an organistation is managing many K.I.T’s.
You may not see the General Tab, nor the Administrator Tab
however, they are shown in this guide to provide a complete
understanding of the full capability for all users.
TOP HORIZONTAL INFORMATION BAR
Locate
Sends a command to your K.I.T to
request the last location.
Toggle between Standard Time and Real
Time location.
GPS locate
Allows you to view your K.I.T location and
activity history for the past 60 days.
History
Non action Icon that allows you to quickly view
if the selected K.I.T is turned on or off.
K.I.T Status
Non action Icon that allows you to quickly view
if your K.I.T is on or off the charger.
Charger Status
Non action Icon that allows you to quickly
view if your K.I.T Security Mode is on or off.
Security Status
This allows you to sign out of your device
and the portal.
Sign out
This will auto refresh the view of your map in
line with your selected time in admin settings.
Auto refresh
5min
SETTINGS MENU
GEO FENCE
If you would like the extra safety of being notied
when the wearer leaves an area by setting up
a geo-fence you create a ‘safe zone’. Safe zone
alerts can notify up to ve authorised contacts.
This can be set as a radius from an address
location or a polygon using ve points and will be triggered if
the wearer is located outside of that zone.
AREA ALERT
Your emergency contacts can be notied once
you enter an area. This can be used to advise
them that you have arrived at that area safely (eg:
shops, doctors or an appointment), or be used to
notify of them if you have entered an area that is
unsafe (eg: lake, railway or bushland).
SPEED ALERT
If an alert has been triggered, it can be helpful to
know if the wearer is walking, or in a moving
vehicle. Use this setting tab to set the speed limit
that will trigger an alert to your emergency
contacts.
REMINDERS
At those important times for the wearer to take
their medication, have a drink, or to have
something to eat, the device will let the wearer
know by displaying an icon on their K.I.T as well
as an audible reminder for their type of alert.
A transport reminder can also be set that will notify the
wearer 15 minutes before their transport is expected to
arrive.
In this section, you can also decide if you would like the
wearer to acknowledge that they have seen or heard the
alert by selecting “user seen alerts on’. The wearer can
acknowledge the alert by pressing the bottom silver button
LOCATION MAP
From this main page you can quickly view and locate K.I.T you
have selected in the top centre panel of the horizontal bar.
This will be the person you are locating as
well as making changes for in the settings
page.
On the top left of the horizontal bar you will
nd the Locate icon. Click this and you will
send a request for your K.I.T to report its last
known location.
The last known location will be displayed as a location pin the
map.
Clicking on this location pin will provide you with additional
information such as date and time of the last location,
remaining battery life, last known activity, speed, status and
the option to show the address.
Locate
GPS
Frequency
Keep in touch with:
GPS LOCATE FREQUENCY
Your K.I.T reports its GPS location a
minimum of every one minute (depending on
your settings). In an emergency, the Online
Client Console can be changed to monitor
‘Real Time’ location tracking, to override all
other settings and provide a more frequent,
location update by clicking the autofrefresh
button.
This is perfect for emergency situations and for people who
need close monitoring.
Keep in mind that (like your mobile phone) using constant GPS
tracking will limit the usable hours of the device and therefore
require more frequent charging.
5min
IMEI
1. To update settings on your K.I.T or to view wearer activities,
visit K.I.T login at www.findmetech.com.au or go to
kitfindmelogin.com.au.
2. Log in with your unique Username and Password provided
to you at purchase.
3. For fast reference, place your username, password, IMEI
and phone number of your K.I.T below.
LOGGING IN
IMPORTANT
When making any changes to the Online Client Console, the K.I.T
you are making the changes to must be switched on and have
network connectivity in order for the changes to be accepted. You
must press the ‘set’ or ‘T’ button on each change and wait for
conrmation notication for your changes to take effect.
Once K.I.T has accepted the command, a notication will pop up
conrming the changes you made have been actioned.
MAKING CHANGES to your K.I.T
Username
Password
K.I.T number (this is the SIM card number in your watch)
LOGGING IN & MAKING CHANGES LOCATING WEARER FEATURESNAVIGATING
QUICK START GUIDE