User Manual 12” LCD ProScribe Xper module Atom
Copyright © This manual is copyrighted with all rights reserved. Under the copyright law, this manual may not be copied, in whole or part, without written consent of Philips. Under the law, copying includes translating into another language or format.
Safety and EMC approvals The 12” LCD ProScribe Xper module Atom meets the following medical safety requirements: DIRECTIVES • MD – Safety Requirements: 2006/42/EC. STANDARDS • IEC 60601-1: 1988 + A1:1991 + A2:1995. • EN 60601-1: 1990 +A1:1993 +A2:1995 • UL60601-1, 1st, 2006 • CAN/CSA-C22.2 No. 60601-1-M90, 2005 • IEC 60601-1: 2005 • EN 60601-1: 2007 • ANSI/AAMI ES 60601-1:2005 • CAN/CSA-C22.2 No.
Biological Hazard and Returns The structure and the specifications of this device as well as the materials used for manufacturing makes it easy to wipe and clean and therefore suitable to be used for various applications in hospitals and other medical environments, where procedures for frequent cleaning are specified. However, normal use shall exclude biological contaminated environments, to prevent spreading of infections.
Easy to integrate, deploy and maintain The 12” LCD ProScribe Xper module Atom allows users to take full benefit of thin-client computing where data and applications are kept on a server where they can be managed centrally, more securely and at lower total cost. Nearly no downtime is incurred in case a device is lost or stolen: a new 12” LCD ProScribe Xper module Atom straight from the box allows a user to resume an interrupted login session exactly as before.
CONTENTS 1. TECHNICAL INFORMATION ........................................................................................................ 8 2. INSTALLATION .............................................................................................................................. 9 3. DIMENSIONS ................................................................................................................................... 9 3.1. 4. WEIGHT.......................................................
10. FEATURED SOFTWARE APPLICATIONS............................................................................. 21 10.1. CONTROL PANEL .................................................................................................................................................. 21 10.2. HOT KEY UTILITY................................................................................................................................................. 22 11. EXTRA HARDWARE FEATURES.......................
1. TECHNICAL INFORMATION Processor Intel Atom N270 1.6 GHz Chipset Intel 945GSE + 82801G (ICH7-M) Graphic Processor Intel GMA945 BIOS Phoenix Award BIOS Operating System Intel Microsoft Windows Embedded Standard with SP3 Networking Built-in 802.3 network card (Realtek RTL8111DL) Built-in 802.11 b/g/n Wireless PCIE module with internal antenna Model number: RTL8188CE Model name: AW-NE139H Bands transmission: Europe 2413 ~ 2472 MHz U.S. and Canada 2413 ~ 2462 MHz Modulation: DSSS (for IEEE 802.
2. INSTALLATION See BBRS ver. 0.5 PMS CV customer spec. paragraph. 5.1.3 cod. 4522 901 05890 While unpacking the 12” LCD ProScribe Xper module Atom, inspect it and other package contents for shipping damage that could cause a fire or shock hazard. Immediately report any shipping damage to the carrier or transportation company and contact customer service for assistance. Keep all packing material in case you need to ship, store or return the device. 3. DIMENSIONS 60,5 313,4 235,4 3.1.
4. INPUT INSTRUCTION 4.1. RIGHT VIEW 1. USB 2.0 port type A 2. USB 2.0 port type A 3. Reset button 1 3 2 4.2. LEFT VIEW 1.
12” LCD ProScribe Xper module Atom W i n d ow s XP E m b e d d e d xxxxx-x x x-xxx -xxx 3 FCC ID: GZM802160 IC: 6319A-802160 2007 - 0 2 Model No. TSM121XE-M AN00070500000 1AN00070500000 1AN00070 AN000209000001 9919 320 514519919 320 51451 9919 326 12011 1.2 - 0.9A 4 INPUT RATING : 20 - 24V 4.3. BACK VIEW 1. Speakers 2. Desktop feet support mounting screw holes (2 x M3) 3. VESA MIS-D mounting screw holes (4 x M4) 4.
5. CONTROL PANEL DESCRIPTION 1. Power On LED 2. Programmable buttons 3. Track stick buttons 4. Track stick 5. Programmable buttons 6. Microphone 7.
6. BEFORE YOU BEGIN The 12” LCD ProScribe Xper module Atom is intended for use as Windows Embedded Standard powered wireless thin client touch-screen device. To use your 12” LCD ProScribe Xper module Atom you must have the following; ? an AC / DC power supply (24Vdc output voltage - 3,42 A DC output current) ? a wireless access point to access the corporate network or an Ethernet connection 7.
7.3. SCREEN BRIGHTNESS To adjust the 12” LCD ProScribe Xper module Atom brightness, follow this procedure. ? Navigate through: ‘start’ à ’Control Panel’ à ‘Tablet and Pen Settings’ à ‘Display’ ? Moving the slide, set the desired Brightness level for the ‘When plugged in’ condition. ? Click on the ‘OK’ button to save the setting. Display 7.4.
8. DATA INPUT TO THE TOUCH SCREEN 8.1. TOUCH THE SCREEN Use a stylus pen to move the mouse cursor or select the desired desktop icon or menu. NOTE: The stylus pen is designed for your screen. The stylus pen can be provided upon customer request. Use of fingertip or other pointers could damage your screen. 8.2. RIGHT CLICK EMULATION Users accustomed to a mouse device, often right click for quick access to display options for an icon.
8.3. TOUCH-PANEL CALIBRATION If the response of the Touch-Panel results misaligned with the pen, you can calibrate it following this procedure: 1) Double click on the Touchkit icon in the Taskbar 2) Select ‘Tools’ on the Touchkit menu. 3) Press ‘Clear and Calibrate’ to clear the linearization data and start the 4 points calibration. 4) Select “Tools” on the Touchkit menu, and then ‘Linearization’ to start the 9 points linearization. 5) Click ‘OK’ at the end to confirm the operation.
9. CONNECTING TO A NETWORK You can setup a connection to a wireless network (WLAN) or a wired network (LAN). 9.1. WLAN CONNECTION 9.1.1. Wireless module Control Panel method ? Click on the REALTEK PCIE Wireless LAN Utility icon in the taskbar, at the bottom right of your screen. ? Click on the ‘Available Network’ Tab to select it. ? Double click on one of the available networks, to start the connection procedure to that network (you will have to insert other data if required, i.e. network password).
9.1.2. Windows Zero Configuration method The WLAN setup is strictly dependent on the existing wireless network infrastructure. An example of WLAN setup is depicted: ? Click on the REALTEK PCIE Wireless LAN Utility icon in the taskbar, at the bottom right of your screen. ? Click on the ‘Windows Zero Config’ option to select it. ? Navigate through : ’start’ à ’Control Panel’ à ’Network Connections’ and double click on the ‘Wireless Network Connection’ icon; the Wireless Connection Status window will pop-up.
9.2. LAN CONNECTION The D-SUB 9 pins is used to connect your 12” LCD ProScribe Xper module Atom to a LAN network. Pinning definition for sub-D (male) Pinning configuration Pin Signal Pin Signal 1 Screen (PE) 6 TX- 2 TX+ 7 RX- 3 RX+ 8 0V 4 24 V 9 0V 5 24 V Please refer to your network administrator for setting of parameters to connect to the desired Local Area Network.
9.3. REMOTE CLIENT When the connection is ready, you may be required to launch a remote control application to communicate between your 12” LCD ProScribe Xper module Atom and the host computer. The 12” LCD ProScribe Xper module Atom ships with the RDP applications to do this: ? Remote Desktop Connection connects to a Window server To complete the connections with Remote Desktop Connection, you will need information including user name, password and network IP.
10. FEATURED SOFTWARE APPLICATIONS Your 12” LCD ProScribe Xper module Atom has a suite of applications designed to create, share, and manage your information. 10.1.CONTROL PANEL The Control Panel provides access to system settings allowing you to manage the properties of your 12” LCD ProScribe Xper module Atom such as: ? Touch Panel Configures and calibrates your touch screen. ? Display Sets your Background, Appearance, and Backlight Time Out preferences.
10.2.HOT KEY UTILITY There are 4 hot keys buttons to quick launch software applications. You can customize three of these hot keys functions with the ‘Tablet and Pen Settings’ applet.
12. TROUBLESHOOTING 12.1.THE 12” LCD ProScribe Xper module Atom WILL NOT TURN ON... When power is on, you will see: On the pad: Power indicator light above the screen on the right will turn green If power is on, but you still don’t see anything on the screen, wake up the pad by tapping on the screen or by pressing control buttons located on the right hand side of the screen.
13. SAFETY AND PRODUCT CARE INSTRUCTIONS 13.1.CLEAN THE SCREEN: ? To removes dust and other particles, wipe the screen with a clean, soft, lint-free cloth. ? For heavy duty cleaning, wipe the screen with a soft, clean cloth lightly sprayed with a commercial window cleaner that does not contain wax or abrasives. Always apply the cleaner to the cloth, not the screen. ? If the display contains has become greasy, use isopropyl alcohol. NOTE: Paper towels and other paper product are abrasive.
14. PRECAUTIONS 14.1.Installation precautions The equipment should be installed near an easily accessible outlet. Do not install or leave the monitor: In places subject to extreme temperatures, for example near a radiator, heating vent, or in direct sunlight. Subjecting the LCD monitor to extreme temperatures, could cause deformations of the casing or malfunctions. In places subject to mechanical vibration or shock.
15. DISPOSAL OF THE LCD 12” LCD ProScribe Xper module Atom Do not dispose of this monitor with general household waste. The fluorescent tube used in this LCD monitor contains mercury. Disposal of this monitor must be carried out in accordance with the regulations of your local sanitation authority. ? For countries in the European Union This symbol indicates that this product (including the cables, plugs and accessory) must not be disposed of with the other household waste.
16. IDENTIFICATION LABEL The identification label is visible on the back monitor side.
17. SYMBOL DESCRIPTION The following symbols may appear on the 12” LCD ProScribe Xper module Atom WARNING: This symbol alert the user that important information concerning operation and maintenance are provided.
18.
INDEX A Annex1: ................................................................ 29 L B BACK VIEW ................................................................................ 11 BEFORE YOU BEGIN ................................................................. 13 Biological Hazard and Returns........................................................4 LAN CONNECTION .................................................................... 19 LEFT VIEW ........................................................
19. Annex 2 REVISION HISTORY Version Date Author 1.0 12/January/2012 Fusco Description of change 1 - Modified Chapter 1.: added WI-FI module Model number: RTL8188CE. 1.
Specifications subject to change without notice. All dimensions shown are approximate. FIMI S.r.l. Saronno - Italy All rights are reserved. Reproduction in whole or in part is prohibited without the written consent of the copyright owner Printed in Italy (Rev. 1.1 ) 4519 206 1097.1 4519 206 1097.
