W User’s Manual ProScribe CV 12 inch Wireless Thin Client (Rev. 0.
Copyright © This manual is copyrighted with all rights reserved. Under the copy rights law, this manual may not be copied, in whole or part, without written consent of Philips. Under the law, copying includes translating into another language or format.
RF Exposure Statement This EUT is compliance with SAR for general population / uncontrolled exposure limits in ANSI/IEEE C95.1-1999 and had been tested in accordance with the measurement methods and procedures specified in OET bulletin 65 Supplement C. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. In order to avoid the possibility of exceeding the FCC radio frequency exposure limits, human proximity to the antenna shall not be less than 1.
INTRODUCTION A ruggedized wireless thin client display The Philips ProScribe is a ruggedized wireless thin client display, released with Windows XP embedded, both for ITE and medical applications. The ProScribe is designed upon PMS CV requirements. It makes use of wireless technology and thin-client computing to allow workers to access applications stored on a central server as if they were sitting behind their desktop monitor.
CONTENTS ProScribe CV TECHNICAL INFORMATION ............................................6 INSTALLATION ....................................................................7 DIMENSIONS ........................................................................8 WEIGHT ................................................................................
1.1.0 TECHNICAL INFORMATION Processor VIA Low Voltage VIA Eden running at 1GHz (BGA, 133MHz FSB, 64KB L2 cache, 0.13 micron process with 7 watt-Thermal-Design-Power) Chipset VIA CN400 + VT8237R Graphic processor VIA/S3G Unichrome Pro 1GP Bios Inside version VP20, with the kernel-code-base V4.31 Operating System Microsoft Windows XP Embedded with SP2 Networking Built-in 802.
2.1.0 INSTALLATION See BBRS ver. 0.1 PMS CV customer spec. paragraph. 5.1.3 cod. 4522 901 05890 While unpacking the ProScribe, inspect it and other package contents for shipping damage that could cause a fire or shock hazard. Immediately report any shipping damage to the carrier or transportation company and contact customer service for assistance. Keep all packing material in case you need to ship, store or return the monitor.
3.1.0 DIMENSIONS 313,4 60,5 235,4 (fig. a) 3.2.0 WEIGHT Weight without packaging : 2,17 Kg.
4.1.0 INPUT INSTRUCTION 4.1.1 RIGHT VIEW 1. USB 2.0 port type A 2. USB 2.0 port type B 3. Switch reset 1 3 2 (fig. a) 4.1.2 LEFT VIEW 1. D-SUB 9 pins male Pinning configuration: 1 Screen (PE) 2 TX+ 3 RX+ 4 24V 5 24V 6 TX7 RX8 0V 9 0V ProScribe CV 1 (fig.
10 Tmax=35°C Windows XP Embedded xxxxx-xxx-xxx-xxx 2007 - 02 3 FCC ID: GZM802120 IC: 6319A-802120 AN000705000001AN000705000001AN00070 AN000705000001 9919 320 514519919 320 51451 Model No. TSM121XE-M 1.2 - 0.9A 4 9919 320 51451 INPUT RATING : 20 - 24V 4.1.4 BACK VIEW 1. Speakers 2. Desktop feet support mounting screw holes (2 x M3) 3. VESA MIS-D mounting screw holes (4 x M4) 4. TSM swing-arm and pedestal mounting screw holes (4 x M3) 1 1 2 (fig.
5.1.0 CONTROL PANEL DESCRIPTION 1. Battery LED 2. Programmable buttons 3. Track stick buttons 4. Track stick 5. Programmable buttons 6. Microphone 7. WLAN status LED 7 1 2 3 4 3 5 5 6 ProScribe CV (fig.
6.1.0 BEFORE YOU BEGIN The ProScribe is intended for use as Windows XP embedded powered wireless thin client touch-screen device. To use your ProScribe you must have the following; • a AC / DC power supply (24Vdc output voltage - 3,42 Adc output current) • a wireless access point to access the corporate network or • an Ethernet connection in case you plan to use the ProScribe on a fixed location 6.2.
6.2.2 POWER SAVING MODE To make changes to power saving setup, • Navigate through: “START -> Settings -> Control panel -> Power Options” and select the Power Schemes that best meets your needs. • Navigate through: “START -> Settings -> Control panel -> Tablet and Pen Settings”. • Select the “display” TAB • Choose the desired Brightness level Power Schemes Display 6.2.
• Navigate through : “START -> Settings -> Control Panel -> Network Connections -> Wireless Network Connection” and select one of the available networks. • If required, insert a network key or password. • To further configure the WLAN parameters on the “Wireless Network Connection” “Related Tasks” panel, select “Change advanced settings”.
7.1.0 DATA INPUT TO THE TOUCH SCREEN 7.1.1 TOUCH THE SCREEN Use a stylus pen to move the mouse cursor or select the desired desktop icon or menu. (fig. 15a) NOTE: The stylus pen is designed for your screen. The stylus pen can be provided upon customer request. Use of fingertip or other pointers could damage your screen. 7.2.1 LEFT OR RIGHT CLICK EMULATION Users accustomed to a mouse device often right click for quick access to command options for an icon.
8.1.
Select “Calibration” tab Enable the Check-Box -> Press “Apply” Button ProScribe CV 17
Disable the Check-Box -> Press “Apply” Button -> Press “Calibrate Now” Calibrate Touch-Panel 18 ProScribe CV
Press “Update” Button Press “OK” button ProScribe CV 19
10.0.0 CONNECTING TO A NETWORK You can setup a connection to a wireless network (WLAN) or a wired network (LAN). 10.1.0 WLAN Your ProScribe includes a wireless LAN module. 10.1.1 START A CONNECTION Method One Tap (right click) on the WinBond network icon that resides in the taskbar at the bottom of your screen.
10.1.2 When the connection is ready, you may be required to launch a remote control application to communicate between your ProScribe and the host computer. The ProScribe ships with two applications to do this: • Remote Desktop Connection connects to a Window server • Critrix ICA Manager connects to a Citrix server.
To complete the connections with Remote Desktop Connection or ICA Manager, you will need information including user name, password and network IP. Ask your network administrator to provide the required setup information. 10.2.1 LAN The D-SUB 9 pins is used to connect your ProScribe to a LAN network. Pinning definition for sub-D (male) Pinning configuration Pin Signal Pin Signal 1 Screen (PE) 6 TX- 2 TX+ 7 RX- 3 RX+ 8 0V 4 24 V 9 0V 5 24 V (fig.
11.0.0 FEATURED SOFTWARE APPLICATIONS Your ProScribe has a suite of applications designed to create, share, and manage your information. 11.1.1 CONTROL PANEL The Control Panel provides access to system settings allowing you to manage the properties of your ProScribe such as: • Touch Panel Configures and calibrates your touch screen. • Display Sets your Background, Appearance, and Backlight Time Out preferences.
11.6.1 HOT KEY UTILITY There are 4 hot keys buttons to quick launch software applications. You can customize three of these hot keys functions with the tablet and pen settings applet: • Navigate through: “START -> Settings -> Control panel -> Tablet and Pen Settings” • Choose tablet buttons tab • Select the tablet button • Tap on the change button • Tap OK to complete NOTE: Button “2” is not programmable Default action: • Button “1” -> None • Button “3” -> None • Button “4” -> None 11.7.
12.0.0 TROUBLESHOOTING 12.1.1 THE ProScribe WILL NOT TURN ON... • When power is on, you will see: On the pad: Power indicator light above the screen on the right will turn green • If power is on, but you still don’t see anything on the screen, wake up the pad by tapping on the screen or by pressing control buttons located on the right hand side of the screen.
13.0.0 SAFETY AND PRODUCT CARE INSTRUCTIONS 13.1.1 TO CLEAN THE SCREEN: 1. To removes dust and other particles, wipe the screen with a clean, soft, lint-free cloth. 2. For heavy duty cleaning, wipe the screen with a soft, clean cloth lightly sprayed with a commercial window cleaner that does not contain wax or abrasives. Always apply the cleaner to the cloth, not the screen. If the display contains has become greasy, substitute use isopropyl alcohol.
13.0.0 PRECAUTIONS 13.1.0 Installation The equipment should be installed near an easily accessible outlet. Do not install or leave the monitor: In places subject to extreme temperatures, for example near a radiator, heating vent, or in direct sunlight. Subjecting the LCD monitor to extreme temperatures, could cause deformations of the casing or malfunctions. In places subject to mechanical vibration or shock.
14.1.0 DISPOSAL OF THE LCD ProScribe Do not dispose of this monitor with general household waste. The fluorescent tube used in this LCD monitor contains mercury. Disposal of this monitor must be carried out in accordance with the regulations of your local sanitation authority. • For countries in the European Union This symbol indicates that this product (including the cables, plugs and accessory) must not be disposed of with the other household waste.
15.0.0 IDENTIFICATION LABEL FCC ID: GZM802120 IC: 6319A-802120 AN000705000001 2007 - 02 AN00yyww001001 AN000705000001AN000705000001AN00070 Type No. ProScribe CV 9919 320 51451 9919 320 514519919 320 51451 9919 320 51451 1.2 - 0.9A INPUT RATING : 20 - 24V Code number (12NC) Windows XP Embedded xxxxx-xxx-xxx-xxx The identification label is visible on the back monitor side.
INDEX B BEFORE YOU BEGIN 12 C CONNECTING TO A NETWORK LAN 22 START A CONNECTION 20 WLAN 20 CONNECTING TO A NETWORK 20 CONTROL PANEL DESCRIPTION 11 D DATA INPUT TO THE TOUCH SCREEN 15 LEFT OR RIGHT CLICK EMULATION 15 TOUCH THE SCREEN 15 DIMENSIONS 8 DISPOSAL OF THE LCD ProScribe 28 Transportation 27 S SAFETY AND PRODUCT CARE INSTRUCTIONS 26 TO CLEAN THE CASE 26 TO CLEAN THE SCREEN 26 STYLUS RE-CALIBRATION 12 T TECHNICAL INFORMATION 6 TOUCH-PANEL CALIBRATION 16 TROUBLESHOOTING 25 HOW DO
FIMI S.r.L R&D .CG0607 R2007A Specifications subject to change without notice. All dimensions shown are approximate. Copyright © 2007 FIMI S.r.l. Saronno - Italy All rights are reserved. Reproduction in whole or in part is prohibited without the written consent of the copyright owner Printed in Italy 4519 206 1019.