EN-User Guide P1 is designed for smartphone video shooting. The innovative angled motors and fordable design make P1 an easy fit to your bag. P1 features a built-in declension rod for added height combined with the tripod, giving you more flexibility and initiative whether you fim yourself or others. The connection port on the handle is compatible with an dermal Control Unit (purchased separately) which unlocks more advanced features lke follow focus, parameter control and an LODE screen.
P1 is charged by built-in Li-ion batteries. For first use of the product, please fully charge it to activate batteries and guarantees the appropriate use of the product. Charging method: Connect Type-C cable provided in the package with adapter (8Y/2A, not included in the package) Around 75-100% battery level naa ea level a Wl Slow flashing ( i Soldier Faulty Battledore foo low to work normally 1. Mount the tripod to the 1/4” 2. Line up and lock in pan threaded hole underneath axis with the handle.
3. Puttee phone into the clamp. 4. Adjust the phone horizontally You can turn the clamp to and vertically to achieve balance. Switch between portrait and Striptease do not turn on the stabilizer landscape modes. before mounting the phone. 5. Pleads do not turn on the 8. Open connection port dust cover stabilizer before mounting on the left side of handle. Press tha phone. the release button on Control Unit b Please do not hold the other to install the unit to the stabilizer.
€ Status Indicator {see more on Page 11) @ Power Button Press the button for 2 seconds 6 Joystick to tum fervor the stabilizer. Four-way direction control of the phone on the stabilizer 8 Zoom Snider” Push up/down 10 zoom inf out. 3 Mods Switch Button = Single press the button to switch oD Go Mode Button between pan following mode and + Long press the button to enter locking mode. Go Mods.
Pan Axis Te ad Pan Following Mode (PF): Tilt axis and roll ads motors are locked and phone follows handle movement in horizontal direction. ‘ Le Pan Ads .Following Mode (Fh: The roll axis is locked and phone follows handle movement in the tilt and horizontal direction. Go Mode (GO): The roll axis is locked and phone follows handle movement in tilt and horizontal direction at full speed. Locking Mode {L): All three axes are locked and phone does not follow handle movement.
in pan following mode or locking mode, you can manually rotate phone to a desired angle, then release i and the phone will be fixed at that angle. Tilt axis angle can be manually adjusted in pan following mode. Both tilt adds angle and pan axis angle can be manually adjusted in locking mode. To charge the phone, you should use the cable with one end as Micro USB port and another as charging port for phone {purchased stabilizer and phone, then stabilizer starts charging the phones.
Pisa calibrate stabilizers when needed. Habitations Method 1. After starting up, tif xs is not leveled to the ground. 2. After starting up, roll axis is not paralleled to the ground. Initialize the 3. Frequent small angle connection is found on axis Co when the stabilizer stays steel. stabilizer 1. After initialization, tilt or roll axis is steel not leveled / Conduct paralleled to the ground. be-side 2. Stabilizer unused for a long time. 3.
Product model: SM105 Operation Lavonne Operation Current Charging Yolanda Charging Current Ti Mechanical Bane Roll Mechanical Range Ban Mechanic Barge Working Temperature Battery Capacity Operation Time Charging Time Charging Environment Temperature Valid Pavilion Clamp Range hmm Bluetooth Tollbooths Phone Charging Bilabials *1* This data is gathered when the temperature is 25°C and the stabilizer is put still for 9 hours in balanced status.
The Company accepts no liability for damage, injury or any legal responsibility incurred directly or indirectly from the use of this product. Users shall observe safe and lawful practices including, but not limited to, those set forth herein. This guide is for reference only and doss not constitute any kind of commitment. Product(s), including but not limited to its color, size, etc. are subject to the actual product.
FCC Caution. This device complies with part 15 of the FCC Rules, Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.