快速入门指南 Quick Start Guide 型号:Q3 Model: Q3
English DAC and Headphone Amplifier Buttons and Ports ① 3.5mm headphone output/Line in ② 2.5mm balanced headphone output ⑥ Bass switch ⑦ Gain/Filter/Reset button/Green indicator light ③ 4.4mm balanced headphone output ⑧ USB Type C port ④ RGB indicator light ⑨ Charging switch ⑤ Power/Volume knob Operation Instructions 1 Turn on/off Turn the Power/Volume knob clockwise until a click sound is heard to turn on the device; keep turning clockwise to increase the volume.
Turn anticlockwise to decrease the volume; turn anticlockwise until a click sound is heard to turn off the device. 2 Gain/Filter/Reset button/Green indicator light 1) Single press button⑦ : switch gains. The OFF green light means Low Gain, ON means High Gain. 2) Double press button⑦: switch filters. 3) Hold button⑦ while connecting to a computer: enter UAC1.0 mode. (Please hold it less than 10 seconds, otherwise the device will be reset.) 4) Hold button⑦ for 15s: reset the device.
charged 6) Charging (powered on): light pulses while still indicating the relevant states; constantly on while it is fully charged 4 Working as a USB DAC/sound card 1) If the Windows system supports UAC1.0: the USB DAC function of the Q3 can work directly without a driver. Operation guide: hold the button⑦ and meanwhile insert the USB cable which is already connected to a computer into the Q3. After connecting, release the button⑦ and select the Q3 as the output device on the computer.
When not connecting to the computer, turn on the Q3 and insert the line-in audio cable into the Q3’s line-in port (3.5mm headphone output port), and meanwhile insert the balanced headphones into its 2.5mm or 4.4mm headphone output port. In this way, the Q3 will enter headphone amp mode which can amplify input signals and output them through balanced headphones. If it is connected to a computer, first you need to stop the playback on the computer to enable the Q3’s headphone amp function.
When using the included Type C to Type C USB cable to connect the Q3 to a mobile device, please follow the direction of the arrow on the cable end. The end with a downward arrow should be used for the mobile device while the upward arrow for the Q3. Here is the diagram. Notes and Precautions ★ For your safety, please do not wear headphones in dangerous environments. ★ Please adjust the volume to a suitable level before wearing headphones to protect your hearing.
restore to normal operation. List of Items Included (Notes: check to make sure all items are included in the package.) ● USB A to Type C USB cable*1 ● Lightning to Type C USB cable*1 ● 3.5mm to 3.5mm audio cable*1 ● Type C to Type C USB cable*1 ● Silicone bands (long)*2 ● Silicone bands (short)*2 ● Cloth carrying pouch*1 ● Silicone pad*1 ● Warranty card*1 ● Quick start guide*1 Learn More To learn more about the product, please visit our website: www.fiio.