COMPANY CONFIDENTIAL T99B132.
COMPANY CONFIDENTIAL 1 Table Of Content 1 PURPOSE .................................................................................................................................................................6 2 APPEARANCE INTRODUCTION .......................................................................................................................7 3 OVERVIEW ......................................................................................................................................
COMPANY CONFIDENTIAL 1 Figure 1 Appearance .................................................................................................................................................7 Figure 2 Composition of setup .................................................................................................................................8 Figure 3 LED indication .......................................................................................................................................
COMPANY CONFIDENTIAL Revision History Date 2018/09/05 2020/03/20 Author Fabio Chen Fabio Chen Revision 0.1 1.0 1 Remark Initial Version Addition the production spec and for FCC regulation.
COMPANY CONFIDENTIAL 1 Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
COMPANY CONFIDENTIAL 1 1 Purpose This document is a brief introduction on Femtocell Installation and setup. Table 1 Product Specification Radio Hardware Configuration Antenna Throughput Power Dimension Weight Environmental LTE TDD Frequency B46(5150~5250MHz, 5725~5850MHz) TX Power EIRP 30dBm (whole system) Sensitivity -93.5dBm MU-MIMO 2T x 2R LAN 10/100/1000 Base-T Ethernet RJ45 RESET External Access Antenna 2 * external LTE Antenna Power 12V DC/1.
COMPANY CONFIDENTIAL 2 Appearance introduction Figure 1 Appearance 7 1
COMPANY CONFIDENTIAL 1 3 Overview 3.1 Setup steps The installation and setup of the HeNB is easy, it adopts zero-touch configuration. User does not need any manual configuration on the HeNB. All configuration data will be provisioned from remote management system. Steps for complete installation is as below Step1. Connect the ADSL router to the ADSL line Step2. Connect HeNB’s WAN port to ADSL router’s LAN port Step3. Power on ADSL router and wait for the READY LED turns on Step4.
COMPANY CONFIDENTIAL 1 4.2 STATUS LED indication The Status LED indicates the information of Power and Alarm The power information is in green color. The alarm information is in red color. Item Description LED Power off Power off ● Power on Power on ● Initialization - H/W boot H/W startup ● Initialization Locking GPS under location service ★ - Location For the LED patern and priority of each alarm please refer to the AlarmList file. Alarm 4.
COMPANY CONFIDENTIAL Figure 3 LED indication 10 1
COMPANY CONFIDENTIAL 1 Cautions: Do not place the device in an environment which is with high humidity. Damped device may make humans in danger. When the thunder or storms, do not touch cable in case of short. Do not plug the cables or adaptors which are not defined in the package. Do not bend the LAN cable or AC Adaptor cable. Do not strongly knock the device. Do not place the device on the top of paper materials. Do not place the device where is unstable.
Professional installation instruction 1. Installation personal This product is designed for specific application and needs to be installed by a qualified personal who has RF and related rule knowledge. The general user shall not attempt to install or change the setting. 2. Installation location The product shall be installed at a location where the radiating antenna can be kept 20cm from nearby person in normal operation condition to meet regulatory RF exposure requirement. 3.