FIG FLIP Phone User Manual Android™ 8.
Basic Operations Switch on Touch and hold the Power button until the phone switches on. Note: If you have enabled USIM/SIM locking in the Settings menu, enter the correct PIN number upon power-on before you use the phone. Caution: Three consecutive attempts of entering an incorrect PIN will lock the SIM card. If it is locked, use a PUK provided by the operator to unlock it. Switch off Touch and hold the Power button until the Phone Options screen displays. Tap “Power off” to switch off the phone.
Home Screen 1. Notification bar: Slide down at the top of the main screen to view notifications and shortcuts. Then you can choose or tap the “clear all” to clear the notifications. 2. App icon: Tap an app to open it.
Phone Settings To display the Settings menu, tap the Settings icon directly. 1.SIM card: In the Settings menu, choose SIM Card. You can then manage your SIM cards on the pop-up page. 2. Network: In the Settings menu, select WLAN to configure your radio network; or select Traffic usage to configure your mobile data services; or select Mobile Network under More to configure data services of your phone. 3. Sound: In the Settings menu, choose Sound.
Call To initiate a call, start dialing a contacts name from the home screen. Choose a contact and hit the call button to call. Additionally, while a contact is selected you can tap the menu button to send a message, edit contact or go to call history. You are also able to initiate a call by selecting a phone number from the contacts app or from a sms thread. Missed Call: If you missed a call while your phone was shut, you can view the missed call in the following ways.
Message We’re proud to announce that the current version of the phone boasts the newly launched FIG Messages app. New message: a) Tap the Add icon on the upper right of the Message page. The message creating page is displayed. Enter the name or phone number of the target contact into the Recipient bar. The phone will automatically search among the list of contacts for one that best matches the entered info. (You can also select the contact from the list of contacts or groups.
APP Switcher To activate this function; Long press the right side button of the phone. This function allows you to quickly switch between screens and close down apps. Switch Keyboards The FIG Flip has two input methods. A T9 traditional keyboard and an on screen touch keyboard. To disable or enable one or more of the keyboards navigate to the system menu in settings. In “Language & Input” you can toggle keyboard on/off.
Troubleshooting To save time and avoid unnecessary cost, please conduct the following checks before contacting our after-sale personnel: 1. Unable to turn on the phone: Check whether you have tapped and hold the Power button for over three seconds. Check whether the battery is in good contact. If not, remove the battery, re-install it, and turn on the phone again. Check whether the battery runs out. If yes, charge it. 2.
FCC Warning This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. This 4G phone meets the government's requirements for exposure to radio waves. The guidelines are based on standards that were developed by independent scientific organizations through periodic and thorough evaluation of scientific studies. Thestandards include a substantial safety margin designed to assure the safety of all persons regardless of age or health.
Body-worn Operation This device was tested for typical body-worn operations. To comply with RF exposure requirements, a minimum separation distance of 10mm must be maintained between the user’s body and the handset, including the antenna. Third-party belt-clips, holsters, and similar accessories used by this device should not contain any metallic components. Body-worn accessories that do not meet these requirements may not comply with RF exposure requirements and should be avoided.