User's Manual

ManualsBrandsFidelix ManualsElectronics800 MHz Fixed Wireless Terminal

CONTENTS

I. Introduction

1. Notice for Using

2. Checking the Package

3. Name and Function of Each Part

4. Installing Terminal

II. Preliminary

1. Making Calls

2. To End a Call

3. Redial

4. Receiving Calls

5. Using Memory Functions

1. Storing Numbers In Memory

2. Erasing A Number In Memory

3. One-touch Dialing

4. Two-touch Dialing

5. Redialing For Last Call Numbers

6. Searching For Memories

6. Using Message Functions

1. VMS (Voice Mail Service)

2. Text Message Service

3. Stored Message

4. Message Receiving Time

5. Deleting Message

7. Data Services

III. Menu Mode

1. Volume

1. Ringer 11

2. Key Beep 12

3. Earpiece 13

2. Ring Type

3. Alarm

Summary of content (9 pages)

PAGE 1
CONTENTS I. Introduction 1. 2. 3. 4. Notice for Using Checking the Package Name and Function of Each Part Installing Terminal II. Preliminary 1. 2. 3. 4. 5. Making Calls To End a Call Redial Receiving Calls Using Memory Functions 1. Storing Numbers In Memory 2. Erasing A Number In Memory 3. One-touch Dialing 4. Two-touch Dialing 5. Redialing For Last Call Numbers 6. Searching For Memories 6. Using Message Functions 1. VMS (Voice Mail Service) 2. Text Message Service 3. Stored Message 4.
PAGE 2
4. Call Information 1. Last Call [41] 2. Home Calls [42] 3. Roam Calls [43] 4. ALL Calls [44] 5. Security 1. Lock mode [51] 2. Restrict [52] 3. Initialize [53] 4. Lock Code [54] 5. Emergency # [55] 6. Clearing calls [56] 6. Features 1. Auto Answer [61] 2. Auto Retry [62] 3. Scratch pad [63] 4. Mute [64] 5. Beep Length [65] 6. One-Touch [66] 7. Display 1. Back light [71] 2. Banner [72] 3. Show Time [73] 4. Auto Hyphen [74] 5. Version [75] 6. New Msg [01] 7. Msg Send [02] 8. Alerts 1. Fade [81] 2.
PAGE 3
I. Introduction Thanks for your purchasing our product. This product is a FWT(Fixed Wireless Terminal) using CDMA(Code Division Multiple Access) technology. Before using this product, please read carefully this chapter. 1. Notice for Using - Do not open the housing of WLL terminal on your own. - Place the terminal in a safe area from shocks. - Do not touch antenna during call. - Avoid hot or moist place. - Do not wipe terminal with chemical solution.
PAGE 4
2.
PAGE 5
3. Name and Function of Each part # [Menu] Button $ [RECALL] Button % Message LED & Battery LED " LCD Screen ' RSSI LED ( [MESSAGE] Button [UP]/[DOWN] ) Button , Dial Button * [CLEAR] Button + [END] Button / [ON-HOOK] Button - [MUTE] Button . [SEND] Button " LCD Screen Display information about the Terminal status. 4 lines LCD with backlighting. # [Menu] Button Choose function menu and select the left menu in LCD. $ [RECALL] Button Retrieve stored telephone numbers and choose the right menu in LCD.
PAGE 6
% Message LED: If messages arrive green LED will be lighted. & Battery LED: Colors of LED indicate the remains of Battery power as below. - Red LED: Indicate that the Battery power is weak. It means, you have to charge the Battery by connecting the external power supply (SMPS). - Yellow LED: Indicate that the Battery power is not sufficient. - Green LED: Indicate that the Battery power is sufficient. ' RSSI LED: Colors of LED indicate the strength of receiving signal as below. - OFF: No service.
PAGE 7
Antenna connector Data Port DC In Jack Power Switch 4 DC In Jack: Connect power supply from SMPS. 4 Power Switch: Make turn on and off the terminal. - ON: Turn on. - ST-BY: Turn off. Terminal turns off with sending "Power off"command to system. - OFF: Turn off. Separate power completely from the internal circuitry. Terminal turns off without sending "Power off" command to system. 4 Data Port: A port which data services are available.
PAGE 8
4. Installing Terminal 4 Connect Di-pole antenna to terminal as shown below. (1) (1) 4Connect DC jack to the terminal as shown below. (3) (3) 10 4Connect handset to the terminal as shown below. (2) (2) 4Connect the SMPS plug to the outlet.
PAGE 9
4 Turn on the power switch and you can hear the beep sound. 4Check the LCD mode is waiting state or not. 4Adjust direction of Di-pole antenna or move the position of the terminal to improve the strength of receiving radio signal.