User's Manual

II. Preliminary
1. Making Calls
<Off-hook state>
- Pick up the handset. You will hear the dial tone.
- In the "No Service" state, you cannot make calls.
- Dial the telephone number and press [SEND] key to make a call.
- If you want to make a call to the last dialed number, hold the handset and
then just press [SEND].
- If you do not [SEND] after dialing the number, the call will be made
automatically 8 seconds later.
-Speak on the telephone.
-Place the handset on-hook to terminate the call.
*You can adjust the handset volume using [UP]/[DOWN] during the call.
In the off-hook state, all buttons except the [MENU] are available.
<On-hook state>
- Press two times [RECALL] to choose the telephone number you already
made a call before and hook off the handset to make a call.
- Or dial the telephone number when your handset is placed on-hook, and
then pick up the handset to make a call.
- Speak on the telephone.
- Place the handset on-hook to terminate the call.
* You can press [SEND] before pick up the handset to make a call.
<Calling to stored number>
- Press [RECALL].
- Search for the number you want by using [UP]/[DOWN].
- Pick up the handset.
- Press [SEND] or wait for 8 seconds.
* Modifying the phone number during dialing.
Modifying one digit : Press [CLEAR].
To try to Call again : Press [END].
13