Menu PL polski....................................3 EN english.................................10 DE deutsch................................17 FR français................................24 ES español................................31 PT português............................38 Support Should you require help configuring Home Center Lite, use tutorials and technical presentations which can be found at www.fibaro.com.
Zawartość opakowania Zasilacz Kabel ethernetowy Antena Home Center Lite 3
1. Zamontuj antenę 2. Podłącz kabel ethernetowy Zacznij od przykręcenia anteny zgodnie z ruchem wskazówek zegara. Kablem ethernetowym połącz złącze LAN Home Center Lite ze swoim routerem, aby podłączyć centralę do internetu. 3. Podłącz zasilacz 4. Włącz Home Center Lite Podłącz zasilacz do Home Center Lite, a jego wtyczkę sieciową do gniazda sieci elektrycznej. Przyciśnij krótko przycisk POWER. Po chwili Home Center Lite będzie gotowa do pracy.
Twoja sieć lokalna Gdy już połączysz swoją Home Center Lite z routerem za pomocą kabla sieciowego i włączysz centralę, będzie ona widoczna dla wszystkich urządzeń w Twojej sieci lokalnej (LAN). Komputer Internet Modem Home Center Lite Tablet Smartfon Dostęp zdalny Domyślnie Twoja centrala jest widoczna wyłącznie w sieci lokalnej. Aby umożliwić dostęp zdalny, spoza sieci lokalnej, skonfiguruj swoje konto na stronie dom.fibaro.com.
Stwórz inteligentny dom Połącz się z Home Center Lite wykorzystując komputer pracujący w tej samej sieci lokalnej. Do odnalezienia adresu IP Twojej centrali użyj aplikacji FIBARO Finder. www.fibaro.com/finder-win www.fibaro.com/finder-os Znajdź Home Center Lite Wejdź na stronę www.fibaro.com, pobierz, zainstaluj i uruchom program FIBARO Finder. Kliknij przycisk ODŚWIEŻ, a zobaczysz adres Home Center Lite w Twojej sieci lokalnej. Po kliknięciu POŁĄCZ, zostaniesz przekierowany do panelu logowania.
Twórz Pokoje Konfigurację swojej Home Center Lite zacznij od stworzenia pomieszczeń w menu, aby odzwierciedlić układ Twojego domu. Twój dom Sekcja jest grupą pomieszczeń w Twoim domu. Sekcją może być całe piętro albo kilka pomieszczeń. Dodaj Dodaj pomieszczenie Nazwa pomieszczenia Urządzenia Sekcje Dodaj sekcję Nazwa sekcji Pomieszczenia Sekcja Pomieszczenia Dodaj Nazwij pomieszczenie, a następnie wybierz sekcję, do której ma być przypisane.
Dodaj urządzenia Po utworzeniu pomieszczeń możesz zacząć dodawać urządzenia. Pomieszczenia Kliknij Urządzenia w menu głównym. Odszukaj i kliknij przycisk DODAJ, aby zacząć dodawanie urządzenia (tryb nauki) po lewej stronie menu. Menu zacznie odliczać czas (30 sekund), w którym musisz dodać nowe urządzenie do sieci Z-Wave. Urządzenie musi znajdować się w bezpośrednim zasięgu sieci Home Center Lite w trakcie dodawania.
Diody LED Diody sygnalizacyjne umieszczone na przedniej części obudowy pozwolą Ci monitorować pracę Home Center Lite. Gdy dioda się świeci, oznacza to, że: Power Urządzenie jest włączone. Sieć LAN Centrala jest podłączona do sieci lokalnej (LAN). Internet Centrala ma dostęp do internetu. Z-Wave Miga, gdy w sieci Z-Wave wysyłane lub odbierane są informacje. Update Miga, gdy do pobrania jest nowa aktualizacja oprogramowania.
Contents AC/DC Adapter Ethernet Cable Antenna Home Center Lite 10
1. Connect antenna 2. Connect ethernet cable Start from connecting the antenna, by turning the mounting screw clockwise. Using the included ethernet cable, connect Home Center Lite's LAN port to a router in order to connect the gateway to internet. 3. Connect power adapter 4. Turn on Home Center Lite Connect the included power adapter to Home Center Lite and plug it to the mains socket. Press the POWER button briefly. Your Home Center Lite will be ready to work in few seconds.
Your Local Network Connect your Home Center Lite with a router using the included LAN cable and start the gateway. From now on Home Center Lite will be visible to all devices within your local area network (LAN). Computer Internet Modem Home Center Lite Tablet Smartphone Remote Access By default the Home Center Lite is visible only within your local network. To enable remote access from outside of your local network, configure a home.fibaro.com account.
Create Intelligent Home Home Center Lite is set to DHCP client mode by default. To find its IP within your local network, download a FIBARO Finder application, in a version appropriate for your operating system, using the links on the right. www.fibaro.com/finder-win www.fibaro.com/finder-os Find Home Center Lite To determine a Home Center Lite IP, download, install and run FIBARO Finder application. Click REFRESH to find Home Center Lite's IP within your local network.
Create Rooms When setting up your intelligent home start with creating rooms to reflect the layout of your home. Your home Section is a group of rooms in your home. Section may be whole floor or a few rooms. Add Add Room Room Name Devices Create sections Add Section Section Name Rooms Add a room Section Add Name the room and then choose the section to which you would like to add it. 3 4 Change an icon Each room can be represented by the unique icon.
Add devices After creating the rooms you can start adding the devices. Rooms Select “Devices” from the main menu. Select the “Add or remove device” option from the left side menu. Click “Add” to start adding a new device (learning mode). Add or remove device The menu will count down the time (30 sec by default) for you to add a new device to the Z-Wave network (inclusion). Note that the device needs to be located within direct range of the Home Center Lite during the inclusion process.
LED diodes located on the front panel of the Home Center Lite enclosure have the following purpose: Power Glows when the power supply is on. Lan Network Glows when the HCL is connected to the local network. Internet Glows when the HCL is connected to the internet. Z-Wave Blinks when the HCL sends commands to the Z-Wave network devices. Update available Blinks when a software update is available.
Inhalt AC/DC Netzteil Netzwerk-Kabel Antenne Home Center Lite 17
1. Antenne anschließen 2. Ethernet-Kabel anschließen Schließen Sie zuerst die Antenne an, drehen Sie dabei die Befestigungsschraube im Uhrzeigersinn. Verwenden Sie das beiliegende Ethernet-Kabel zum Anschluss des Home Center Lite LAN Port an einen Router, um den Controller mit dem Internet zu verbinden. 3. Netzteil anschließen 4. Home Center Lite einschalten Schließen Sie das beiliegende Netzteil an den Home Center Lite und stecken Sie das andere Ende in eine Steckdose.
Ihr lokales Netzwerk Schließen Sie Ihr Home Center Lite über das beiliegende LAN Kabel an einen Router und starten Sie den Controller. Das Home Center Lite ist nun für alle Geräte innerhalb Ihres lokalen Netzwerkes (LAN) sichtbar. Computer Internet Modem Home Center Lite Tablet Smartphone Fernzugriff Standardmäßig ist das Home Center Lite nur innerhalb Ihres lokalen Netzwerks sichtbar. Um den Fernzugriff von außerhalb des lokalen Netzwerks zu aktivieren, konfigurieren Sie ein Konto auf home.fibaro.com.
Ein Intelligentes Heim erstellen Das Home Center Lite ist standardmäßig auf den DHCP-Client-Modus festgelegt. Um seine IP im lokalen Netzwerk zu finden, laden Sie über die Links auf der rechten Seite eine FIBARO-Finder-Anwendung entsprechend der Version Ihres Betriebssystems herunter. www.fibaro.com/finder-win www.fibaro.com/finder-os Home Center Lite finden Um eine IP für das Home Center Lite zu bestimmen, downloaden, installieren und führen Sie eine FIBARO Finder Anwendung aus.
Räume anlegen Beim Einrichten Ihres intelligenten Hauses beginnen Sie mit dem Anlegen von Räumen im HCL-Menü, um den Grundriss Ihres Hauses darin widerzuspiegeln. Ihr Haus Ein Bereich ist eine Gruppe von Räumen in Ihrem Zuhause. Dies können eine komplette Etage oder mehrere Zimmer sein.
Geräte hinzufügen Nachdem Sie die Räume angelegt haben, können Sie damit beginnen, Geräte anzulegen. Gehen Sie auf “Module” im Hauptmenü. Wählen Sie “Lösche oder Füge Gerät hinzu” wie im Menü links aufgeführt. Klicken Sie auf “Hinzufügen”, um ein neues Gerät anzulegen (im Lernmodus). Lösche oder Füge Gerät hinzu Das Menü zeigt Ihnen während der Aufnahme des neuen Gerätes in das Z-Wave-Netzwerk (Inklusion) den Count Down an (ca. 30 Sek. standardmäßig).
Die LED-Dioden welche sich an der Vorderseite des Gehäuses des Home Center Lite befinden, haben folgende Funktion: Power Leuchtet auf, sobald das Gerät am Stromnetz angeschlossen wurde. Lan Network Leuchtet auf, wenn das HCL am lokalen Netzwerk angeschlossen ist. Internet Leuchtet auf, wenn das HCL mit dem Internet verbunden ist. Z-Wave Blinkt, wenn das HCL Befehle an Geräte des Z-Wave Netzwerks sendet. Update available Blinkt, wenn ein Software Update verfügbar ist.
Contenu Adaptateur secteur Câble ethernet Antenne Home Center Lite 24
1. Connexion de l’antenne 2. Connexion du câble réseau Commencez par connecter l’antenne. Pour cela, placez-la et tournez la vis dans le sens des aiguilles d’une montre. A l’aide du câble réseau fourni, connectez le port Ethernet du Home Center Lite au routeur pour pouvoir brancher le contrôleur à Internet. 3. Connexion de l’adaptateur secteur 4. Mise en marche du Home Center Lite Connectez l’adaptateur secteur fourni au Home Center Lite et branchez-le à une prise électrique.
Réseau local Connectez votre Home Center Lite à votre routeur en utilisant le cable Ethernet fourni et démarrez votre contrôleur. A partir de maintenant votre Home Center Lite sera visible sur votre réseau local (LAN) par tous vos appareils. Ordinateur Internet Modem Home Center Lite Tablette Smartphone Accès distant Par défaut votre Home Center Lite n’est visible qu’à l’intérieur de votre réseau local. Pour autoriser l’accès à distance en dehors de votre réseau, configurez un compte sur home.fibaro.com.
Créez une maison intelligente Le Home Center Lite a été configuré par défaut dans le mode client DHCP. Pour trouver son adresse IP dans votre réseau local veuillez télécharger le logiciel FIBARO Finder approprié pour votre système d’exploitation en utilisant les liens à droite. www.fibaro.com/finder-win www.fibaro.com/finder-os Cherchez le Home Center Lite Pour déterminer l’adresse IP du Home Center Lite il faut installer et exécuter le Fibaro Finder.
Création des pièces Lors de la configuration de votre maison intelligente, commencez par créer sur votre HCL les pièces pour représenter votre installation réelle. La Maison Une section est un groupe de pièces dans votre maison. Ca peut être un étage complet ou quelques pièces seulement.
Ajout des périphériques Après avoir créé les pièces vous pouvez commencer à ajouter des périphériques. Pièces Sélectionnez “Périphériques” dans le menu principal. Sélectionnez ensuite l’option “Ajouter ou retirer un périphérique” dans le menu de gauche. Cliquez sur “Ajouter” pour démarrer l’ajout d’un nouveau périphérique (mode apprentissage).
Les LED situées sur la face avant du Home Center Lite indiquent ces informations: Power Allumé quand le HCL est branché. Lan Network Allumé quand le HCL est connecté à votre réseau local. Internet Allumé quand le HCL est connecté à internet. Z-Wave Clignote quand le HCL envoie des commandes aux périphériques Z-wave du réseau. Update available Clignote quand une mise à jour est disponible.
Contenido Transformador de CA/CC Cable de Red Antena Home Center Lite 31
1. Coloque la antena 2. Conecte el cable Ethernet Comience colocando la antena, y afianzándola al hacer girar el pasador con rosca en las agujas del reloj. Mediante el cable Ethernet suministrado, conecte el puerto LAN del Home Center Lite al router para conectar el controlador a Internet. 3. Conecte el transformador 4. Encienda el Home Center Lite Conecte el transformador suministrado al Home Center Lite y conéctelo a la corriente. Pulse brevemente el botón de encendido (POWER).
Su Red Local Conecte su Home Center Lite a un router mediante el cable LAN suministrado y encienda el controlador. De ahora en adelante el Home Center Lite será visible a todos los dispositivos conectados a su red local (LAN). Ordenador Internet Modem Home Center Lite Tablet Smartphone Acceso Remoto Por defecto, el Home Center Lite sólo es visible dentro de su red local. Para activar el acceso remoto desde el exterior de su red local, configure una cuenta en home.fibaro.com.
Crear una Casa Inteligente El Home Center Lite está predefinido por defecto en modo cliente DHCP. Para hallar su IP en su red local, descargue la aplicación FIBARO Finder, seleccionando una versión compatible con su sistema operativo, mediante los enlaces a la derecha. www.fibaro.com/finder-win www.fibaro.com/finder-os Encontrar el Home Center Lite Para determinar la IP de un Home Center Lite IP, descargue, instale y ejecute la aplicación Fibaro Finder.
Crear Habitaciones Cuando esté generando su casa inteligente, comience creando habitaciones en el menú del HCL para reflejar la distribución de su hogar. Su Casa Una sección es un grupo de habitaciones en su casa. Una sección puede ser una planta entera o unas pocas habitaciones.
Añadir dispositivos Tras crear las habitaciones, puede comenzar a añadir los dispositivos. Habitaciones Seleccione “Dispositivos” del menú principal. Seleccione la opción “Añadir o quitar dispositivo” del menú de la izquierda. Pulse en “Añadir” para comenzar a añadir un nuevo dispositivo (modo de aprendizaje). Agregar o remover dispositivo El menú realizará una cuenta atrás (30 segundos por defecto) para que añada el nuevo dispositivo en la red Z-Wave (inclusión).
Los diodos LED ubicados en el panel frontal de la carcasa del Home Center Lite tienen la siguiente finalidad: Encendido Brilla cuando el suministro eléctrico está activo. Red LAN Brilla cuando el HCL está conectado a la red local. Internet Brilla cuando el HCL está conectado a Internet. Z-Wave Parpadea cuando el HCL envía comandos a los dispositivos de la red Z-Wave. Actualización disponible Parpadea cuando hay una actualización de software disponible.
Conteúdo da Embalagem Fonte de alimentação AC/DC Cabo de rede Antena Home Center Lite 38
1. Conectar a antena 2. Ligue o Cabo de Rede Inicie por conectar a antena, rodando a base de montagem no sentido dos ponteiros do relógio. Com o cabo de rede fornecido, ligue a porta LAN do Home Center Lite ao router para que o controlador obtenha acesso à internet. 3. Ligue a fonte de alimentação 4. Ligar o Home Center Lite Conecte o transformador fornecido ao Home Center Lite, ligando-o posteriormente à tomada. Pressione o botão de power de forma breve.
A sua Rede Local Ligue o seu Home Center Lite ao router usando o cabo de rede fornecido, e ligue o controlador Home Center Lite. A partir de agora o Home Center Lite ficará visível a todos os dispositivos que estão na sua rede local (LAN) Internet. Computador Internet Modem Home Center Lite Tablet Smartphone Acesso Remoto Por defeito o Home Center Lite é apenas visível na sua rede local. Para obter acesso fora da sua rede local, por favor, configure uma conta em home.fibaro.com.
Criando a Casa Inteligente O Home Center Lite está configurado com DHCP por defeito. Para encontrar o seu IP na rede local, descarregue a aplicação “FIBARO Finder” apropriada para seu sistema operativo. Use os seguintes links na direita: www.fibaro.com/finder-win www.fibaro.com/finder-os Encontrar o Home Center Lite Para determinar o IP do Home Center Lite, instale e corra a aplicação “Fibaro Finder”. Clique em “REFRESH” para encontrar o IP do Home Center Lite na sua rede local.
Criar Divisões Ao configurar a sua casa inteligente, comece por criar divisões no menu do HCL que reflitam a disposição da habitação. A sua casa Uma secção representa um grupo de divisões.Pode ser um piso inteiro ou apenas algumas divisões. Adicionar Adicionar Divisao Nome da Divisao Dispositivos Criar Secções Adicionar Secçao Nome da secção Divisões Adicionar divisões Secção Adicionar Atribua um nome à divisão e escolha a secção à qual vai estar associada.
Adicionar dispositivos Após criar as divisões, poderá começar a adicionar dispositivos. Divisões Escolha “Dispositivos” no menu principal. Selecione a opção “Adicionar ou apagar dispositivo” no lado esquerdo do menu. Clique “Adicionar” para começar a adicionar um novo dispositivo (modo de emparelhamento). Adicionar ou apagar dispositivo O menu irá contar de forma decrescente (30 seg. por defeito) enquanto adiciona um novo dispositivo à rede Z-Wave (inclusão).
Os LED’s situados no painel frontal do Home Center Lite têm os seguintes significados: Alimentação Acende quando a o dispositivo está alimentado. Rede LAN Acende quando o HCL está ligado na rede local. Internet Acende quando o HCL está ligado à Internet. Z-Wave Pisca quando o HCL envia comandos à rede Z-Wave. Atualização disponível Acende quando uma atualização do software se encontra disponível.