ROUTING Product range 2011_GB_en_FB_Routing.indd 1 06.05.
It’s not about finding the perfect router. It’s about getting the perfect result. Rounding edges, routing cutouts, contouring, cutting grooves – all tasks that are best carried out with the right combination of routers and edge routers. Speed and wattage are important, but not the only factors. Controlled power, which can be applied optimally to the workpiece, is vital. The tools must also be capable of coping flexibly with the changing requirements of the tasks.
Quick response to changing requirements Base runners and copying rings can be replaced quickly using FastFix, without requiring tools. Changing router bits is also a simple matter, thanks to the ratcheting mechanism, which allows you to either tighten or release the router bit used without having to turn the open ended spanner. Cleanliness Cleanliness signifies health and perfect results: the new suction design behind the OF 2200 ensures suction power of up to 99 %.
Because things work better when everything fits together. Systems get it done. System = Added value To do a good job, you need the perfect tools. To go one step further, you need a system. A system that seamlessly integrates accessories and consumables with the power tools. That offers maximum organisation and utilisation of space. This will deliver added value on each and every investment you make. Once-off investment – multiple uses.
System = Continuous work process System = Better organised The system accessories help get the work done faster. From a multi-routing template, to a guide rail with holes through to the jointing system VS 600. As manufactured system solutions, these accessories meet Festool’s high quality standards, allowing you to achieve rapid and precise results without the need for laborious manual creation of routing templates. SYSTAINER and SORTAINER protect both tools and accessories.
Routers OF 1010 | OF 1400 | OF 2200 Creating structures, adding contours. Extremely versatile. Extremely precise. Extremely easy to use. Available in 3 power categories: XX OF 1010 | 55 mm Routing depth adjustment range: Handle for easy one-hand operation. OF 1400 | 70 mm Routing depth adjustment range: Power and ease of operation in perfect harmony. OF 2200 | 80 mm Routing depth adjustment range: The 2200-watt power pack with outstanding pulling power.
Systematically equipped for every task: XX Multi-routing template MFS: for routing cutouts and circles with no need for laborious manual creation of individual templates (see page 8) XX Jointing system VS 600: for creating stable zinc joints (see page 10) XX Fast routing of a row of holes: with the perforated guide rail (see page 11) XX Systematic Transformations: the CMS Compact Module System converts standard routers to versatile bench-mounted routers (see page 14) For more Festool system accessories and
Multi-routing template MFS | Worktop template APS900 Precision as standard. The perfect partner for all Festool routers. These templates replace individual templates which are time-consuming to produce. They also work much faster, easier and more precisely.
For system accessories and consumables see from page 24 Flush connection – the permanently secured APS guarantees exact results, even if several routing operations are carried out in one groove. Two keyhole templates on the APS are used for routing recesses for standard connection fittings underneath worktops. Neat corner and panel connections of up to 900 mm in depth – a straightforward task using the worktop template.
Jointing system VS 600 Combining tradition with efficiency. The jointing system VS 600 is an exceptionally logical method of achieving perfect woodworking results. Offering outstanding precision for partially covered and open dovetail joints, box joints and custom-fit dowelling joints. XX XX XX XX It couldn’t be easier – the router, template and copying ring are optimally adapted to each other for accurate results.
FS guide rail Impeccable guide. The guide rail was invented and perfected by Festool. For enhanced precision of grooves and rows of holes. Fitted with slideway lining to allow machines to glide smoothly along the rail, plus a groove for fastening and lever clamps. XX XX XX XX XX A quick and easy way to create rows of holes – the guide rail with spaced series of holes is indispensable for making furniture. The solution for accurate work – the guide rail adapter for routers delivers precise grooves.
OFK 500 | OFK 700 | MFK 700 edge routers Cutting edges are converted to object edges. Edge routing for a perfect finish in furniture making and object construction. For flush trimming, chamfering, rounding, contouring and cutting grooves – evenly and tidily, with no splinters! OFK 500 edge router: With a lightweight design that is convenient and simple to use. OFK 700 edge router: The specialist tool for edge veneer.
For system accessories and consumables see from page 24 1.5° and 0° router table: The angle of 1.5° protects the surface during routing. The 0° table (OFK 700/ MFK 700) is used for veneered or coated workpieces. 1.5° router table for veneered surfaces 0° router table for untreated surfaces The OFK 500 operates at a particularly small distance from the cutter to the router table. As a result, you have no routing errors, no slipping on corners and a better finish overall.
CMS Compact Module System Open to change. Multiple machines in one. Stationary use or manual routing. In 0.5 m2 . Systematic design makes things possible. The CMS Compact Module System consists of a basic unit. Combined with the appropriate modules and routers OF 1010, OF 1400 and OF 2200, it becomes a stationary bench-mounted router. Making light of work like routing rebates, recesses or curves.
For system accessories and consumables see from page 24 Removable crank handle (fitted above or below the table) for convenient adjustment of routing height. Optimum dust extraction – the transparent router guard covers the router bit during profile and arc cutting while simultaneously allowing a clear view of the workpiece. Easily reproducible results – sliding table and extension table enable precise guiding of the workpiece.
Festool routers All tools at a glance. True multi-purpose tools. OF 1010 | OF 1400 | OF 2200 Cutting grooves, chamfering, cutting rebate or contouring – these routers can handle everything, whether it’s arcs, circles or cutouts. Easy to use, delivers precise results. The edge experts. OFK 500 | OFK 700 | MFK 700 Edge routers provide the solution for an even, tidy finish: suitable for edge veneers, flush trimming, chamfering, rounding, contouring and cutting grooves.
Festool cutters Because quality means no compromise. Compromise is out of the question for anyone insisting on guaranteed quality. Festool therefore recommends that you always use original Festool routing accessories for all Festool routers. These tools are manufactured to the same high standards as the machines themselves, so you can rely on their efficiency. The materials used are a special type of high grade steel and highly wear-resistant carbide.
Festool cutters Solid carbide groove cutter with plunge point s=8 ØD NL GL R Fα Order No. 3 4 5 6 7 8 8 6 10 12 14 17 20 30 45 45 45 55 55 55 60 – – – – – – – – – – – – – – 490952 490953 490954 490955 490956 490957 491647 Single-edged reversible blade groove cutter s = 8/s = 12 with plunge point ØD NL GL R Fα Order No.
Total length (mm) Working length (mm) Cutter diameter (mm) Shank diameter (mm) Chamfering angle (°) Radius (mm) Marking for minimum clamping length n max. = Maximum routing speed Packaging unit Tungsten carbide High performance, high speed steel Flute cutters Flute cutter with ball bearing ØD NL 25.5 12.7 28.8 14 31.7 14.3 38.1 16 GL R Fα 54 6.35 56 8 56 9.5 57 12.7 – – – – Chamfer cutter with ball bearing ØD NL GL s=8 20 14 54 25.7 25.1 70 24 10 50 38.5 23 64.5 36 11.
Festool cutters Roundover cutter with 2 ball bearings ØD NL s=8 16.7 9 18.7 10 20.7 11 22.7 12 25.5 13.5 28.7 15 31.7 16.5 38.1 19 42.7 22 s = 12 43 22 63 32 GL R s = 8/s = 12 Fα Order No. 49 2 50 3 51 4 52 5 54 6.35 55 8 56 9.5 59 12.7 62 15 – – – – – – – – – 4910098) 491010 8) 4910118) 491012 8) 491013 8) 491014 8) 491015 8) 491016 8) 4910178) 72 82 – – 491106 491107 15 25 Hinge location cutter Table edge cutter with ball bearing s=8 ØD NL GL R Fα Order No.
Total length (mm) Working length (mm) Cutter diameter (mm) Shank diameter (mm) Chamfering angle (°) Radius (mm) Marking for minimum clamping length n max. = Maximum routing speed Packaging unit Tungsten carbide High performance, high speed steel Handrail cutters Tongue and groove cutters Dovetail cutter s=8 ØD NL GL R1 R2 Order No. 19 12.5 54 5 4 491032 Handrail cutters s=8 s=8 s = 8/s = 12 ØD NL ,s=8 14.3 13.5 16 13.5 20 17 14.3 16 20 26 GL R Fα Order No.
Festool cutters Stile and rail cutter, male with ball bearing s=8 Stile and rail cutter, female with ball bearing s=8 ØD NL B R Fα Order No. ØD NL B R Fα Order No. 43 21 5 – – 491130 43 21 5 – – 491129 Raised panel cutter with ball bearing n max 22,000 s = 12 Raised panel cutter without ball bearing n max 22,000 Classical stile and rail cutter, male ØD NL s=8 46 20 s = 12 46 20 B R s = 8/s = 12 Fα Order No.
Total length (mm) Working length (mm) Cutter diameter (mm) Shank diameter (mm) Chamfering angle (°) Radius (mm) Marking for minimum clamping length n max. = Maximum routing speed Packaging unit Tungsten carbide High performance, high speed steel Flush trim cutters Chamfer cutter s=8 OFK 700/MFK 700 s=8 OFK 700/MFK 700 Roundover cutter s=8 OFK 700/MFK 700 Roundover/flush trim cutter with s=8 ball bearing OFK 700/MFK 700 ØD NL GL R Fα Order No. ØD NL GL R Fα Order No.
Routers Accessories and consumables. Copying rings | Collets Cutting parallel grooves Stable base Secure guides Routing series of holes Copying rings Clamping collets Copying rings Stable base Efficient dust extraction Connecting worktops Efficient dust extraction Stable base 24 2011_GB_en_FB_Routing.indd 24 06.05.
Creating circles | cutouts Routing edges also for OF 1400 also for OF 1400 only for OF 1010 Efficient dust extraction Classic corner joints Secure guides Reliable cutting of front grooves Secure guides traction only for OF 2200 For system additions for benchmounted routers, see from page 26. Secure guides Cutting parallel grooves Ready to go, whatever the requirements: the SYSTAINER keeps base runners, copying rings and everything else you need within easy reach. www.festool.co.
Edge routers, multifunctional router and putty router Accessories and consumables. Stationary tasks System addition for bench-mounted routers OF 1010, OF 1400 and OF 2200 Secure support | Precise results Secure guides Cutting parallel grooves 26 2011_GB_en_FB_Routing.indd 26 06.05.
ORGANISATION rebating Efficient dust extraction Clamping collet Cutters www.festool.co.uk 2011_GB_en_FB_Routing.indd 27 27 06.05.
Routing and accessories Scope of delivery and order numbers. Routers Scope of delivery Order No. OF 1010 Clamping collet dia. 8 mm, side stop, operating tool OF 1010 EBQ Set GB 110 V/240 V + guide rail adapter, guide rail FS 800/2, chip deflector, in SYSTAINER SYS 3 T-LOC OF 1010 EBQ-Plus GB 110 V + guide rail adapter, chip deflector, in SYSTAINER SYS 3 T-LOC OF 1400 EBQ-Plus GB 110 V/240 V Clamping collet dia. 8 mm, clamping collet dia.
Accessories Scope of delivery 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 Clamping collet SZ-D 6/OF 1000 with union nut, for router shank, dia. 6 mm Clamping collet SZ-D 6.35/OF 1000 with union nut, for router shank, dia. 6.35 mm (1/4”) Clamping collet SZ-D 8/OF 1000 with union nut, for router shank, dia. 8 mm Locking nut UEM/OF 900/KF For clamping collets Centring mandrel ZD-OF/D 6 35+8 for all Festool routers, for shank support dia. 6.
Routing and accessories Scope of delivery and order numbers. Accessories Scope of delivery 27 Slot joint template VS 600 FZ 6 Dovetail size 6 mm, copying ring diameter 8.
Accessories Scope of delivery 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 Base runner LA-OF 2200 D36 CT for copying rings < 30 mm, with openings for optimum dust extraction Base runner LA-OF 2200 D36 reduces the opening of the router in relation to the cutter diameter AFB-OF 2200 support Support widener for safe guidance of the router at workpiece edges Guide stop FS-OF 2200 with fine adjustment and support plate for router, without rods ST-OF 2200/2 Rod ST-OF 2200/2 Guide rods for side stop and guid
TTS Tooltechnic Systems AG & Co. KG Wertstraße 20 D-73240 Wendlingen represented by: TTS Tooltechnic Systems GB Ltd Saxham Business Park Saxham Bury St Edmunds Suffolk IP28 6RX Great Britain Phone: +44 (0) 1284 760 791 Fax: +44 (0) 1284 702 156 E-mail: info@festool.co.uk in Ireland: Our tools live up to the claim “Made in Germany” – Tools for the toughest demands. Visit www.festool.co.uk for more information.