HearMe 200BT User manual HearMe 200BT English 1
HearMe 200BT TABLE OF CONTENTS SAFETY AND MAINTENANCE.......................................................................................................2 ABOUT THE INSTRUCTION MANUAL..........................................................................................2 MARKINGS AND SIGNS APPLIED TO THE DEVICE...................................................................3 BASIC INFORMATION ABOUT THE DEVICE...............................................................................
HearMe 200BT MARKINGS AND SIGNS APPLIED TO THE DEVICE Risk of electric shock - do not open. This notice warns the user not to open the receiver housing. The housing may be opened solely by authorized service technicians. CE logo.
HearMe 200BT BASIC INFORMATION ABOUT THE DEVICE Main features 1500 mAh high capacity built-in rechargeable battery, playtime lasts for 4 hours at least for 4 hours. Compact design, convenient to carry for outdoor use, no matter what angle it is put, it is conductive to music play. Stereo wireless Bluetooth transmission, specifically for smart phone, tablet PC use, supports the volume direclty. Supports all digital audio devices with 3.5mm jack. Built-in microphone and hands-free function.
HearMe 200BT IN- AND OUTPUTS 1. On/Off: Turning OFF/ON the speaker. 2. USB: MINI USB charging port (3.7 V 1500mAh). 3. AUX: Φ 3.5 stereo audio signal input interface for external devices. BUTTONS AND THEIR FUNCTIONS 1. Bluetooth play/pause. Press long (3 seconds) to repair Bluetooth connection. Press long (5 seconds) to switch soft. 2. Press long to increase the volume. Press short to change to the next song (only available by an established playlist). 3. Press long to reduce the volume.
HearMe 200BT Note: After connecting the AUX Φ3.5 cable, the speaker switches automatically to the AUX mode. When you disconnect the AUX cable the speaker switches to the Bluetooth mode and establishes the connection to the associated previously connected Bluetooth device. PLAY MUSIC IN THE BLUETOOTH MODE • In the Bluetooth mode, when the speaker is connected with the mobile device and a music playlist is set, push short the button Bluetooth to be able to control the mobile phone (or Bluetooth device).
HearMe 200BT TROUBLESHOOTING The speaker doesn’t play • Make sure the speaker is charged. • Make sure the speaker and cell phone are connected. Please refer to your cell phone’s Bluetooth menu and “Paring Your Device” section. Cannot pair my cell phone to the speaker • Make sure the speaker is charged. • Make sure the speaker and cell phone are in paring mode. • Make sure the Bluetooth of your cell phone is on; please refer to the cell phone’s users’ manual.
