Fenix E05 Announcement
Fenix Implements ANSI Standard (Refers to ANSI/NEMA FL-1 Standard) Fenixlight Limited ANSI/NEMA FL-1 standard
ANSI/NEMA FL-1 Standard OUTPUT RUNTIME ANSI/NEMA FL-1 standard DISTANCE INTENSITY IMPACT WATER RESISTANT RESISTANT
Catalogue .The brief introduction of ANSI/NEMA FL1-2009 Standard .Why was it created? .Who approved the standard? .What does it mean to consumers and distributors? .The descriptions of the contents and the icons .
.The brief introduction to the ANSI/NEMA FL 1-2009 Standard z American National Standards Institute (ANSI for short) is established in 1918. It is a non-profit non governmental standards institute. z ANSI is one of the five permanent members in International Standardization Organization (ISO for short) as well as one of the four permanent members in International Electrotechnical Commission (IEC for short). It takes part in 79% activities of ISO/TC and 89% activities of IEC/TC.
.Why was it created? For a long time, there have been no standardized tests or uniform rating systems for consumers to judge the flashlight performance. Without any uniform rating systems, it frustrates the manufacturers who work hard to make high quality lighting tools. The establishment of ANSI/NEMA FL 1-2009 Standard can help consumers to compare the flashlight performance. The standard will provide a hand for consumers to rate and compare the claims on the packages for each manufacturer’s products.
.Who approved the standard? American National Standards Institute (ANSI for short) National Electrical Manufactures Association (NEMA for short) Representatives from 14 illuminating companies, such as Princeton, Surefire, Petzl, Streamlight, Black Diamond and Duracell, etc.
.What does it mean to consumers and distributors? The ANSI Standard can help the consumers know about the technical parameters of flashlights rapidly which are beneficial for the consumers to make a comprehensive comparison to various flashlights. It can provide a hand for distributors and end users to know more about the products and make the best choices for their needs. It evens the playing field for those manufacturers that participate.
.The descriptions of test contents and icons The testing contents of ANSI Standard include light output, runtime, beam distance, peak beam intensity, impact resistance and water resistance. 1.Output: A measurement of the total quantity of emitted overall light energy as measured by integrating the entire angular output of the portable light source. The result is reported in lumen. Purpose: To provide a procedure for the measurement of the quantity of overall light energy emitted by the device.
Procedures: Devices are to be mounted or held against an external port adapter or placed inside the sphere. Exposure should be set to produce test equipment manufacturer’s detector saturation level. Results: Light output is the average lumen value of the 3 samples.
.The descriptions of testing contents and icons 2.Runtime: The duration of time from the initial light output value (that’s 30 seconds after the light is turned on with fresh batteries ) until the light output drops to 10% of the initial value. Purpose: To determine the amount of time elapsed (under continuous operation) at which the device’s light output reaches a level when users will commonly replace the batteries.
.The descriptions of test contents and icons 3.Beam Distance: The distance from device at which the light beam is 0.25 lux. Results are reported in meters. Purpose: To provide a procedure to determine the maximum distance at which the devices is capable of producing 0.25 lux of light within 30s to 2 min of operation. Procedure: Place the luxmeter at a test distance of either 2 or 10 or 30 meters from the lens of the device to be tested.
. The descriptions of test contents and icons Final calculation: To determine the beam distance, the Inverse Square Law formula is used: √( peak beam intensity (cd) /0.
.The descriptions of test contents and icons 4.Peak Beam Intensity: Peak beam intensity is the maximum luminous intensity typically along the central axis of a cone of light. The value is reported in candela and does not change with distance. Purpose: To provide a procedure to determine the peak beam intensity, reported in units of candela, of the device’s beam pattern within 30s to 2 min of operation.
.The descriptions of test contents and icons 5.Impact Resistance: The degree to which a portable light resists damage when dropped on a solid surface. Dropped samples must not exhibit any cracks or breaks, and must remain fully functional in order to pass the impact resistance test. Purpose: To ensure the structural integrity of hand-held/portable lighting devices under specified impact conditions.
Each sample is dropped 6 times using impact orientations that approximated cube. Samples must be marked prior to the drop test in a manner that can assure that all 6 drop orientations are tested. Each sample must be released on each orientation of the approximated cube. Samples should be in the “off” position with batteries in place. Passing Criteria: Dropped samples must not exhibit any cracks or breaks visible with normal vision. The product must remain fully functional.
.The descriptions of test contents and icons 6. Water Resistance: Purpose: To test whether the flashlight water resistance can satisfy the lowest requirements for the reliability. Procedure: All test samples shall function normally immediately after the test and 30 min after the test. Water ingress is allowed as long as the above conditions are met.
. How will Fenix use it? 1. Fenix will strictly adhere to the ANSI Standard to measure the various fundamental features of its products. To follow the industrial development tendency, Fenix will spare no efforts to provide more reliable products and perfect services. The consumers can better evaluate, compare and choose their satisfying products provided that they know about the output, beam distance, impact resistance, water resistance and the runtime.
A. In line with the ANSI Standard, Fenix tests the output and runtime. Output Test: Devices are to be mounted or held against an external port adapter or placed inside the sphere. Exposure should be set to produce test equipment manufacturer’s detector saturation level. Light output is the average lumen value of the 3 samples.
B. According to the ANSI Standard, Fenix tests the beam distance. Using the luxmeter to test the beam distance Beam Distance Test: To place the luxmeter at a test distance of either 2 or 10 or 30 meters from the lens of the device to be tested. Use the luxmeter to identity the brightest point of the beam pattern and record the highest indicated in value. To determine the beam distance, the Inverse Square Law formula is used: √( peak beam intensity (cd) /0.
C. Fenix tests the peak beam intensity, abiding by the ANSI Standard. Using the luxmeter to test the peak beam intensity Peak Beam Intensity test: Place the luxmeter at a test distance of either 2 or 10 or 30 meters from the lens of the device to be tested. Use the luxmeter to identify the brightest point of the beam pattern and record the highest indicated value. Results are reported in candela. Measurements shall be taken 30s to 2 min of turning on the device.
D. Fenix tests the impact resistance according to the ANSI Standard. Impact Resistance Test: Samples should be in the “off” position with batteries in place. Each sample is dropped 6 times using impact orientations that approximate a cube. Each sample must be released on each orientation of the approximated cube. Test samples must pass a drop test from a minimum of 1m in order for the impact resistance claim to be made. Dropped samples must not exhibit any cracks or breaks visible with normal vision.
E. With the ANSI Standard , Fenix tests the water resistance. Water Resistance Test: All test samples shall function normally immediately after the test and 30 min after the test. Water ingress is allowed as long as the above conditions are met.
2. Fenix carries out other tests. Besides the ANSI Standard, according to the consumers’ various real using conditions, Fenix performs other tests set by itself, such as the salt spray test, bending test, vibration test, ultraviolet radiation test, etc. Only the products which completely meet the ANSI Standard and its internal standards can be the qualified Fenix products.
A. Shakeout Test Shakeout test: To provide a procedure to determine the scratch-resistant and wear-resistant abilities of the surface of flashlight.
B. Bending Test Bending test: mainly use to test the bending degree and the strength of wires.
C. Salty Spray Test Salty spray test: mainly use to test the corrosion-resistant ability.
D. Ultraviolet Radiation Test Ultraviolet radiation test: mainly use to test the changes of flashlight after it goes through the ultraviolet test.
E. Environmental Test The environmental test includes the high temperature test and low temperature test, which are used to test the high-temperature-resistant and the low-temperature-resistant abilities respectively.
F. Vibration Test Vibration test: To provide a procedure to determine the anti-vibration ability.
G. Switch Test Switch test: To provide a procedure to determine the lifespan of the switch and the resistivity.
H. Temperature Test Temperature test: To provide a procedure to determine the conditions of the heat generation and the heat dissipation and the relevant temperatures, etc.
3. Fenix has introduced the ANSI Standard to its product packages. Fenix has introduced the ANSI Standard to its new products. All technical parameters of the products, such as E21, LD25, LD40 and HP20, are in line with the ANSI Standard. The output and the runtime become much more accurate and scientific. The later products will be in line with the standard gradually and meet the international needs.
4. Fenix has introduced the standard to the product manuals. Fenix has made some modifications to the new product manuals. E21, LD25, LD40 and HP20 are in line with the standard. The modifications help the consumers much easier to identify, compare and rate the flashlights. Fenix will gradually introduce the ANSI Standard to its later products to meet the international needs.
5. The description of the flashlight test All tests are conducted with fresh batteries or fully charged batteries /energy storage devices. 12V DC devices that are only tethered shall be powered with 13.8V DC using a power supply. Peak beam intensity and beam distance are both measured by the same test. To provide a procedure to determine the peak beam intensity, reported in units of candela, of the device at which the light beam is 0.25 lux within 30 seconds to 2 minutes of operation.
If the product is sold without batteries and a peak beam intensity claim is made, a specific battery type and chemistry shall be recommended with the package. Lab conditions shall be a controlled temperature of 21±2 and a relative humidity of 50±40%. The lab environment must minimize any redirecting of light that would affect the measurement outcome. If the device offers multiple focusing or adjustable beam angel, the peak beam intensity will be measured at the maximum level or as otherwise identified.
