User Manual

ManualsBrandsFeniex Industries ManualsElectronicsFeniex C-4015 Storm Pro 200W Siren

FENIEX // 2018 // INSTRUCTION MANUAL

WEB // www.feniex.com

Feniex Product Copyrights This price List and the mentioned Feniex products include or describe copyrighted Feniex material. Laws in the United States and other countries

preserve for Feniex Industries and its licensors certain exclusive rights for copyrighted material, including the exclusive right to copy, reproduce in any form, distribute and make

derivative works of the copyrighted material. Accordingly, any copyrighted material of Feniex and its licensors contained herein or in the Feniex products described in this Price

List may not be copied, reproduced, distributed, merged or modied, transmitted, transcribed, stored in retrieval system or translated into any language or computer language,

in any form or by any means, without prior written permission of Feniex Industries, Inc.. Feniex and the stylized Feniex logo are registered in the U.S. Patent & Trademark Oce.

C-4014 & C-4015

INSTRUCTION MANUAL

Is this the latest version?

SCAN HERE

IMPORTANT

If your Storm Pro Siren has the label/logo pictured,

it is NOT COMPATIBLE with 4200 DataLink.

DO NOT CONNECT IT via RJ45 to the 4200 System.

Summary of content (8 pages)

PAGE 1
TM FE NIE X // 2018 // INSTRUCTION MANUAL WE B // w w w.feniex .com Is this the latest version? SCAN HERE C-4014 & C-4015 INSTRUCTION MANUAL IMPORTANT If your Storm Pro Siren has the label/logo pictured, it is NOT COMPATIBLE with 4200 DataLink. DO NOT CONNECT IT via RJ45 to the 4200 System. Feniex Product Copyrights This price List and the mentioned Feniex products include or describe copyrighted Feniex material.
PAGE 2
TABLE OF CONTENTS TM Safety Regulations & Warranty Service after Expiration Copyright Feniex Product Copyright 3 3 3 3 Box Contents, Specifications, & Dimensions Box Contents Dimensions Specifications 4 4 4 4 Wiring Information Wiring Information 5 5 Installation Instructions Power Speaker Connection Siren Tone Activation Power-Up Functionality Siren Tone Selection Siren Tones Audio Tones 6 6 6 6 6 6 6 6 Configuration Instructions Park-Kill Siren Tone Overrides Radio
PAGE 3
SAFETY REGULATIONS & WARRANTY SAFETY REGULATIONS The following provides all the information necessary to safely operate the previously listed products of Feniex Industries, Inc. Please read this manual thoroughly before installing or operating your new product in order to prevent any damage or injury. Failure to follow the listed instructions in this manual may result in damage to your products or personal injury.
PAGE 4
BOX CONTENTS, DIMENSIONS, SPECIFICATIONS BOX CONTENTS TM DIMENSIONS COMPONENTS: STORM PRO 100 WATT QUANTITY Storm Pro 100w Amplifier 1* Microphone Clip 1 Microphone Screws 1 2.5" 2 6.96" 4.09" 2.5" COMPONENTS: STORM PRO 200 WATT QUANTITY Storm Pro 200w Amplifier 1* Microphone Clip 1 Microphone Screws 6.96" 6.65" 1 2.70" 1.81" 2 3.
PAGE 5
WIRING TM A KEY A B C D E F B FUNCTION Positive Ground H I Tone 1 12v (+) Tone 3 12v (+) Tone 2 12v (+) Tone 4 12v (+) Rebroadcast K Radio Input M G F 12v (-) I L E 12v (+) Horn Ring J D POLARITY G H C 12v (+) Park Kill Radio Input 100w Speaker 100w Speaker 12v (+) 12v (+) N/A N/A N/A N/A J K L M CONNECTION Positive Terminal Ground Terminal Latching Switch A B KEY A B Latching Switch I H J Radio Speaker Output K Speaker Terminal M L N O P Q FE NI
PAGE 6
INSTALLATION INSTRUCTIONS POWER To power the unit, extend the red wire to a 12v (+) post. Extend the black wire to the ground post.
PAGE 7
OPERATING INSTRUCTIONS TM PARK-KILL Park-Kill is used to deactivate any activated standard siren tone. Park-Kill does not deactivate audio recordings. The Park-Kill wire can be connected to your vehicle's overhead light, door trigger, or park-signal so that the siren is disabled when the door is opened or the vehicle is shifted to park. DUAL SIREN DELAY Dual Delay can be used when both speakers play the same standard siren tone.
PAGE 8
MOUNTING INSTRUCTIONS TM STORM PRO 100 WATT & 200 WATT AMPLIFIER MOUNTING 1) Place the unit against the intended mounting surface. 2) Mark the areas where the mounting holes will be drilled. If the mounting surface is part of the vehicle, make sure no vital components could be damaged by the drilling process. 3) Pre-drill four 1/16" mounting holes on the mounting surface, making sure no vital components of the surface are damaged. 4) Make sure to deburr the holes thoroughly. 1.9685” 6.9675” 6.9675” 1.