User's Manual

ManualsBrandsFengShun Peiying Electro-Acoustic ManualsElectronicsCar Multimedia Player

This Quick Start Guide gives you the basics to

start using your XDCP97BT. Please visit

www.dualav.com/support/manuals.php

to download a complete owner’s manual or call customer

service at 1-866-382-5476 (Monday-Friday, 9AM-5PM EST).

Multimedia Receiver with Bluetooth

featuring a 6.2” digital TFT LCD

XDCP97BT

Installation

Wiring Diagram - Inputs/Outputs

Main Menu

Control Locations

General Operation

Audio Operation

1. Mode

2. Power/Mute/ Volume up/Down

3. Siri

1. Mode

2. Volume Up

3. Power

4. Tune/Track Up

5. Siri

6. Band

7. Volume Down

8. Preset 3

9. Preset 2 / RDM

Remote Control

Press Sound Effect icon In setup menu to select

Fader and Balance, 10-Band tone control,

Presets \ EQ Control (Classic, Rock, Pop, Jazz,

Beat, Flat, User), Surround (Stadium, Cinema,

Opera House, Karst Cave).

Tuner Operation

Select the Tuner icon from the Main Menu screen

or press MODE unit Tuner is selected.

Pairing and Connecting

Before you can use a Bluetooth device, it must be paired and connected. The

Multi Media broadcasts the pairing signal constantly when no devices are

currently connected. Complete the pairing sequence from your Bluetooth device.

The device name is "XDCP97BT". Once pairing is complete, most Bluetooth will

connect automatically if the device is in range

Dialing a Number

Press to display keypad and dial a number.

Making and Ending a Call

Press to connect a call, and press to

end a call.

Streaming Audio

Press to play or pause the music.

Press to skip to the previous track.

Press to advance to the next track.

Bluetooth Operation

Bluetooth Microphone

The microphone is External to the receiver.

This warranty gives you specific legal rights. You may also have other rights which vary from state to state.

Dual Electronics Corp. warrants this product to the original purchaser to be free from defects in material and

workmanship for a period of one year from the date of the original purchase.

Dual Electronics Corp. agrees, at our option, during the warranty period, to repair any defect in material or workman-

ship or to furnish an equal new, renewed or comparable product (whichever is deemed necessary) in exchange

without charges, subject to verification of the defect or malfunction and proof of the date of purchase. Subsequent

replacement products are warranted for the balance of the original warranty period.

Who is covered? This warranty is extended to the original retail purchaser for products purchased from an authorized

Dual dealer and used in the U.S.A.

What is covered? This warranty covers all defects in material and workmanship in this product. The following are not

covered: software, installation/removal costs, damage resulting from accident, misuse, abuse, neglect, product

modification, improper installation, incorrect line voltage, unauthorized repair or failure to follow instructions supplied

with the product, or damage occurring during return shipment of the product. Specific license conditions and copyright

notices for the software can be found via www.dualav.com.

What to do?

1. Before you call for service, check the troubleshooting guide in your owner’s manual. A slight adjustment of any

custom controls may save you a service call.

2. If you require service during the warranty period, you must carefully pack the product (preferably in the original

package) and ship it by prepaid transportation with a copy of the original receipt from the retailer to an

authorized service center.

3. Please describe your problem in writing and include your name, a return UPS shipping address (P.O. Box not

acceptable), and a daytime phone number with your shipment.

4. For more information and for the location of the nearest authorized service center please contact us by one of the

following methods:

• Call us toll-free at 1-866-382-5476

(Monday-Friday, 9:00 a.m. to 5:00 p.m. EST)

• E-mail us at cs@dualav.com

Exclusion of Certain Damages: This warranty is exclusive and in lieu of any and all other warranties, expressed or

implied, including without limitation the implied warranties of merchantability and fitness for a particular purpose and

any obligation, liability, right, claim or remedy in contract or tort, whether or not arising from the company’s negligence,

actual or imputed. No person or representative is authorized to assume for the company any other liability in

connection with the sale of this product. In no event shall the company be liable for indirect, incidental or consequential

damages.

NSC0616-V01

Printed in China

One-Year Limited Warranty

www.dualav.com

FCC Compliance

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) this device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause undesired operation.

Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could

void the user’s authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part

15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a

residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and

used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause

harmful interference to radio or television reception, which can be determined by turning the equipment off and on,

the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

TYPICAL FRONT-LOAD DIN MOUNTING METHOD

Press the function icons to select in setup menu.

USB/iPod Operations

Press the USB to select in Main menu.

CarPlay Operation

Select CarPlay on the Main Menu.

In the Menu mode, press the desired icon

to enter the corresponding mode: Radio, USB,

BT Phone, BT Music, iPod, AUX In, Settings,

CarPlay, Rear Camera.

12 3

10. Preset 6

11. Preset 5

12.

End call

13. Bluetooth Talk

14. Preset 4 / Play / Pause

15. Preset 1 / RPT

16. Mute

17. Tune/Track Down

4. IR Remote Sensor

5. Reset

when the unit is powered-on.

TRIM PLATE

UNIT

TAPTITE BINDING HEAD 5X6MM

TAPTITE TRUSS HEAD 5X6MM

PARKING BRAKE

SWC - 3.5mm JACK

REVERSE

REMOTE TURN-ON

1. System

2. Fader/Balance

3. Equalizer

4. Surround

5. Subwoofer

6. Display

7. Time Settings

8. Misc

1. Lo/DX

2. Preset Scan

3. Presets

4. Seek Up

5. Manual Tune Up

6. Band/Auto Store

7. Manual Tune Down

8. Seek Down

iPhone iPod Mode Setting method

1. When iPhone is not connected to XDCP97BT

using the cable

2. Select iPod Setting Mode

3. Select Restrictions in General mode

(Enter 0000 if the password is required)

4. Inactivate the CarPlay item

FYI, in case of iPod nano and Classic, these does

not include CarPlay function so iPod cable is

connected then they will work as iPod mode.

If the iPhone is connected via USB port, press

CarPlay icon on main menu to mirror the iPhone's

apps onto the screeen. And If the iPhone USB

cable is inserted to the USB port then the

XDCP97BT will automatically change to CarPlay

mode.

Transfering Audio

Press to transfer audio between the

head unit and mobile phone.