OVAL Automatic Tamper(OVAL) USE R MAN UAL 1 Contents 1 Description 3 2 Safety 5 3 Installation 6 4 Operation 8 5 Care and cleaning 12 6 Troubleshooting 13 7 Warranty 14 2
1.3 External Components 1 Description 1.1 Intended use The oval tamper is intended as a fully automatic coffee tamper ,grounded coffee can be tampered with an adjustable force 1 Silicone Stopper Any improper use or modification of oval tamper may had consequences for safety ,warranty and proper function 1.2 Technical data Voltage 100-240V Frequency 50-60Hz Output 24V 2.5A Power 60 W Dimensions 125*156*292mm 2 Adjustment Wheel 7 Switch 3 Power cable port 100 ms Net Weight 5.
2 Safety Read the safety and use instructions carefully before install or use the tamper ,only use the tamper as described in this document and save for future reference 2.1 Oval tamper should only be used for the function which is was designed to tamp grounded coffee ,do not use the tamper to press any other types of food 2.10 If any component of oval tamper is damaged ,we recommend contacting authorized services personnel to carry out the repair or replacement ,guaranteeing the safety standards 2.
Operation 4.1 Use 4.1.1 Turn on the switch 4.1.2 Level the grounded coffee in the portafilter 4.1.3 Insert the portafilter between the upper and lower stand until it reaches the bottom 4.1.4 The tamper automatically starts tamping the coffee while the sensor detects the metal poratafilter The message ( ) appear on the screen Fig-5 4.1.5 Wait until oval tamper has pressed the coffee Fig-1 Fig-2 4.1.6 You can remove the portafilter after the symbol ( ) disappear Fig-5 4.
U1 First set of user data U2 Second set of user data U3 Third set of user data Net Bluetooth link PW Part symbol ms Second tamping U1 U2 U2 Net Third tamping PW Cleaning symbol MODE CLEAN In pressing Time symbol 100 ms CLEAN Fig-5 1st PW the tamping force is (e.g.) 5 kg 4.3 Cleaning mode (Deep cleaning ) First tamping 100 2nd PW the tamping force is (e.g.) 20 kg Confirm /clean button Increase button Decrease button 3rd PW the tamping force is (e.g.
5 Care and cleaning Your oval tamper is in use , now you only need to care the tamper to creating perfect coffee 5.1 Clean the outer covering with a damp cloth 5.2 Clean the tamper bottom with dry cloth and sensor with brush every day Fig-7 Fig-8 5.3 Clean the whole tamper base and upper stand interspace when tamper base is removed with dry cloth every week ,do not use wet cloth to clean the tamper base , grounded coffee will stick to the tamper base 5.
6 Troubleshooting Problem Tamper base does not lower 7 Warranty Cause Solution Tamper power is off Make sure the tamper is connected to the power socket and switch is on The tamping is not strong enough The stand is too low and the Adjusting the stand,bring it as portafilter had not detected closer to the top The tamping force is was set too Select higher force using the quick low Rotate button The stand is too low and it can not Adjusting the stand,bring it as exert enough force closer to
Note :In the following cases ,even within the warranty period ,no free warranty can be provided ,but a paid warranty can be implemented ·Damage caused by the use ,maintenance and storage not in accordance with the instructions ·Due to improper operation ,such as abnormal power supply or damage caused by breakage (drop ,etc.