Foldable Smartphone Gimbal Instructions EN V1.
Catalogue 1.Overview……………………………………………………………………………………………… 2 2.Accessories…………………………………………………………………………………………… 2 3.Start to Use…………………………………………………………………………………………… 3 3.1Unlock / Lock the clamp… ………………………………………………………………………………… 3 3.2. Fold and unfold……………………………………………………………………………………………… 3 3.3 Charging… …………………………………………………………………………………………………… 4 3.4 Smartphone installation… ………………………………………………………………………………… 4 3.5 Power on / off………………………………………………………………………………………………… 4 3.
VLOG pocket2 is a three-axis handheld gimbal suitable for mobile phones. It is small and foldable which can be folded into a pocket. The gimbal supports landscape and portrait shooting, which can also control phone shooting. Suggestion Vlog pocket2 includes below information, please read the information before using the gimbal. 1. Quick start guide 2. Online instruction Tutorial ·The tutorial videos can be watched at FeiyuTech official website or scan the QR code on the right. https://www.feiyu-tech.
1.Overview 1 5 11 15 16 17 5 12 18 2 3 6 6 7 13 8 9 10 14 19 20 21 4 1. Smartphone holder 2. Joystick 3. Focus button 4. 1/4 inch thread hole 5. Tilt axis clamp 6. Pan axis clamp 7. Status indicator 8. Video button 9. Photo taking button 10. Function button 11. Tilt axis 12. Vertical arm 13. Power button 14. Type-C port 15.Cross arm 16.Roll axis 17. Roll axis clamp 18. Folding knob 2.Accessories Type-C Cable×1 2 Tripod×1 Portable bag×1 19. Pan axis 20. Trigger button 21.
3.Start to Use TIPS (1) Unlock the three-axis clamp before powering on the gimbal. (2) Please fully charge the battery before powering on the gimbal for the first time. (3) Landscape to mount smartphone. (4) If the power is too low, the red light will flash three times every five seconds that indicating you should charge it immediately. (5) When not in use, power off the gimbal. 3.1Unlock / Lock the clamp Take the pan axis clamp for example. Unlock Lock 3.2.
3.3 Charging Connect the USB cable to charge. The indicator light is red when charging, and green when fully charged. Charging Charge complete 3.4 Smartphone installation *It is recommended to remove the smartphone case before installation Pull the smartphone holder and put your smartphone in, keep the holder in the center of the smartphone. If the phone tilts to left or right, please hold the roll arm ,slightly move the smarpthone to oppsite side until paralleling to the ground. 3.
3.6 Landscape Switching Hold the gimbal normally and turn the handle left or right to invert. The inverted holding can be used for low angle shooting. Double click the trigger button to recenter the gimbal. 4.Function Operation 4.1 Function / Modes Introduction Pan Mode(Default mode) The roll and tilt direction are fixed, and the smartphone moves according to the left-right movements of the user's hand. Lock Mode The orientation of the camera is fixed.
4.
Video button Single tap: Start/ stop recording(Bluetooth connectivity is needed) Joystick Control the rotation of the gimbal (in normal working state) Setting options (when set on the App shortcut menu page) Trigger button Press and hold: Lock (Release it to quit) Double tap: Reset Triple tap: Switch front and rear camera(Need to connect Feiyu ON App) Single tap first then press and hold: Fast follow mode (Release it to quit) Focus button Slide up and down to adjust focus Slide to the T direction to zoom
4.3Landscape and portrait shot switching Double click the function button or manually rotate the smartphone holder (according to the picture below) to switch between landscape and portrait mode. Kindly Reminder: Do not make anti-clockwise rotation in landscape mode,Do not make clockwise rotation in portrait mode. 4.
5.Gimbal Initialization You can initialize your gimbal when: (1)When smartphone is not level (2)If not used for a long period of time (3)In case of extreme temperature variations Steps (1) Click the function button five times. The motors will stop working. Status indicator turns solid blue. (2) Place the gimbal on a flat, horizontal surface. The gimbal will automatically reset after a few seconds detecting no movement. The blue light will flash three times to indicate end of the reset process.
6.2 Bluetooth Connection Turn on the gimbal. Method one: Download and install Feiyu ON App, run the App, follow the prompts to turn on and connect with the bluetooth. Method two: Turn on the smartphone bluetooth, Connect the gimbal bluetooth in the setting of phone, e.g. FY_ PocketV2_XX. (If the bluetooth can't be found, please turn off Feiyu ON App in the background.) 6.3 Connect the App Open Feiyu ON App and connect the gimbal via tips. Format Bluetooth of gimbal: FY_PocketV2_XX 6.
7.
Disclaimer Thanks for using FeiyuTech product. The information in this document affects your safety and your legal rights and responsibilities. Read the entire document carefully to ensure proper configuration before use, Failure to read and follow instructions and warnings in this document may result in serious injury to yourself or others, or damage to your products or damage to other objects in the vicinity.
Guilin Feiyu Technology Incorporated Company E-mail: service@feiyu-tech.com www.feiyu-tech.