Installation Manual

(1) Tighten the thumb screw to fix the camera
on the quick release plate .
(2) Unlock the safety lock , press and hold the
anti-drop column , insert the quick release plate
in the fixed plate , and lock the safety lock .
Move
the sliding arm
Loosen
tilt axis knob ring
All Follow Mode
Pan Mode
/Lock Mode
cross arm
roll axis knob ring
Loosen
Move
Scan QR code to download detailed manual for more usage of the gimbal.
*
Quick Start Guide
Overview
EN V 1.1
3-Axis Stabilized Handheld Gimbal
for Camera
Guilin Feiyu Technology Incorporated Company
For more information, please visit our official website
E-mail: [e-mail] Tel: [phone]
www.feiyu-tech.com
Due to software and hardware improvements, your actual product might differ from the
descriptions and pictures in this user manual. You can get the latest user manual from the
official website.
Tilt Axis
Position
Lock
Roll Axis Position Lock
Sliding
Arm
Roll Axis
Thumb Screw
Tilt Axis
Safety Lock
Fixed Plate
1/4-20 inch
Thread Hole
Function Button
Joystick
Shutter
Button
Display
Tilt Axis
Knob Ring
Roll Axis
Knob Ring
Cross Arm
Quick Release Plate
Pan Axis Knob Ring
Pan Axis
Anti-dropColumn
Vertical Arm
Handle
Pan Axis Position Lock
1/4-20 inch
threaded hole
Multifunction
Knob
Trigger Button
Power Button
Single Tap
Focusing
Photo/Video
Press Half Way
Type C Port
Position Lock
2
Each of the three rotating axis has one position lock, take the pan axis lock for
example.
3 Axis position lock Lock status Unlock status
User Guide
Charging
1
Please fully charge the battery before powering on the gimbal at the first time.
Charging with Type C USB cable.
Type C USB
Cable
(Equipped by user)
Output: 5V / 2A
(1) Please mount the camera or smartphone before powering on the gimbal.
(2) When the battery is low, please charge the gimbal.
(3) When not in use, power off the gimbal.
TIPS
Specifications
Sony RX100 / Sony a6300 (16-50 or 28-70mm) / Sony a6500 (16-50 or
28-70mm) / Canon M50, ect.
Sony RX0 / GoPro HERO series sports cameras
Fit for smartphone with smartphone adapter(Optional accessory)
1200g （After balancing ）
665g ( Not including the camera, camera lens, etc. )
9 Hours
280°
330°
360°
Power ON / OFF
5
Long press and release the power button when the display shows and you
hear the beep tone.
Gimbal Balancing
4
( Before powering on )
Camera/SmartPhone Installation
3
If the camera doesn't have the 1/4-20 inch screw hole, please
put the camera on mount adapter, which has 1/4-20 inch screw
hole, and then mount it in above steps.
4.3 Pan axis balancing
4.2 Roll axis balancing
(1) Let the gimbal stand on a horizontal plane, unlock the tilt axis position lock.
(2) Loosen the Thumb screw on the camera bottom, slide the sliding arm to
balance the camera until the camera is parallel with the horizontal plane, tighten
the Thumb Screw.
(3) Loosen the tilt axis knob ring, rotate the tilt axis to any angle, and slide the
sliding arm slightly,until the camera can stay stable. Then tighten the tilt axis knob
ring to finish the balance.
(If the camera cannot be parallel with the horizontal plane after balancing, repeat
the steps above until it is parallel. )
4.1 Tilt axis balancing
(2) Loosen the pan axis knob ring, slide the vertical arm to balance the camera.
Then tighten the pan axis knob ring, and rotate the pan axis to any angles, if the
camera can stay stable means balanced.
(1) Unlock the pan axis position lock, hold the gimbal horizontally, make the
handle is parallel with the horizontal plane.
Compatible Cameras
for Reference
Payload
Weight
Theory Battery Life
Max. Tilt Range
Max. Roll Range
Max. Pann Range
By using this product, you hereby signify that you have read this disclaimer and warning carefully and that you
understand and agree to abide by the terms and conditions herein. You agree that you are solely responsible for your
own conduct while using this product, and for any consequences thereof. You agree to use this product only for
purposes that are proper and in accordance with all applicable laws, rules, and regulations, and all terms, precautions,
practices, policies and guideline FeiyuTech has made and may make available. FeiyuTech accepts no liability for
damage, injury or any legal responsibility incurred directly or indirectly from the use of product.
Disclaimer
Thanks for using Feiyu Gimbal. The information in this document affects your safety and your legal rights and
responsibilities. Read the entire document carefully to ensure proper configuration before use, Failure to read and
follow instructions and warnings in this document may result in serious injury to yourself or others, or damage to your
products or damage to other objects in the vicinity.
FeiyuTech will not provide any service for any product obtained from abnormal channels.
1.
2.
3.
4.
Make sure motor spinning is not blocked by external force when gimbal is power on.
DO NOT contact the gimbal with water or other liquid if the gimbal is not mark waterproof or splash-proof.
Waterproof and splash-proof product DO NOT contact sea water or other corrosive liquid.
DO NOT disassemble the gimbal except marked detachable. It need send to FeiyuTech after-sales or authorized
service center to fix it if you accidently disassemble it and cause abnormal work. The relevant costs are borne by user.
Prolonged continuous operation may cause the motor surface temperature to rise, please operate carefully.
Notice
5. DO NOT drop or strike the gimbal. If the battery is abnormal, contact Feiyu After-sales support.
1.
2.
3.
4.
Keep the gimbal out of the reach of children and pets.
DO NOT leave the gimbal near heat sources such as a furnace or heater. DO NOT leave the gimbal inside of a vehicle
on hot days.
Please storage the gimbal in dry environment.
DO NOT overcharge or overuse the battery, otherwise it will cause damage to the battery core.If does not use the
gimbal for a long time, please charge it at least once within one month.
5. Never use the gimbal when the temperature is too high or too low.
Storage and Maintenance
vertical arm
pan axis knob ring
Loosen
Move
Double Tap
Triple Tap
Triple Tap
Single Tap
Follow Mode
(After connecting the gimbal to
camera / smartphone via
Feiyu On App)
Function button's function can be customized as lock/Pan Mode/follow/all follow mode
via APP.
Please connect G6 Max with Feiyu ON App first to achieve the operations above.
1
1
Trigger button's function can be customized as lock/fast follow mode via APP.
2
2
①
③
②
Users can mount smartphone into the optional smartphone
holder, and follow the steps above to install it on the gimbal.
①
②
③
③
④
⑤
Be sure to unlock all the position locks before using the gimbal.
Camera Mode
Button
Lock
Unlock
Lock
Unlock
Default
Default
Default
Default
Double Tap Reset
Fast FollowPress and Hold
Bluetooth
Battery Level
Modes
Camera Modes
HF
Wi-Fi
Multifunctional
Knob Control
Selfie Mode
(Pan axis turn 180°
to shoot）
Scan the QR code to get the latest user manual or download it on
the official website
Detailed Manual
https://www.feiyu-tech.com/g6max/
Download the Feiyu ON App
iOS Version Android Version
* Requires iOS 9.0 or above, Android 6.0 or above.
Scan the QR code to download the app, or search for "Feiyu ON" in the App Store or
Google Play.
解锁状态
(1) Unlock the roll axis position lock, put gimbal on a horizontal plane.
(2) Loosen the roll axis knob ring, slide the cross arm to balance the camera.
Then tighten the roll axis knob ring, and tilt the camera to left or right, if the
camera can stay stable means balanced.( If the camera cannot be parallel with
the horizontal plane after balancing, please unlock the safety lock, and slide the
quick release plate until the camera is parallel with the horizontal plane, then
lock the safety lock.)
Tilt Axis
Position
Lock
Safety
Lock
Roll Axis
Position
Lock
Pan Axis
Position Lock
④
⑤