3-Axis Stabilized Handheld Gimbal for Camera Instructions Guilin Feiyu Technology Incorporated Company User Manual E N V1.
Catalogue www.feiyu-tech.com 1. G6 Plus Overview 1 3. Balance the Gimbal 4 2. Quick Start Guide Balance Adjustment of the Pan Axis Balance Adjustment of the Roll Axis Balance Adjustment of the Tilt Axis 4.
1.
Introduction of Display and Bottons 1 Display HF Bluetooth Battery Level WiFi 3 Function Button Refer to Page 8 Power on / Power off Double tap Follow mode Quadruple tap Five tap Single tap 4 Auto-rotation Mode Initialization 6 Double tap Refer to Page 10 Lock Mode 8 Reset Introduction of Axis and Knob Horizontal Adjustment Button You can control the horizon angle via the horizontal adjustment button.
2. Quick Start Guide 1 Install Battery 2 Remove the bottom cap, insert a 26650 battery and then tighten the cap. TIP Charging Please fully charge the battery before power on the gimbal for the first time. Charging with Micro USB cable as shown below. Micro Port Type 3 Micro USB Cable 26650 Battery Capacity 5000mAh Put the Camera / Smartphone on Put the Camera on Correctly place the camera on the adjustment sliding plate, and tighten it with thumb screw in the middle sliding chute.
Balance the Gimbal 4 5 NOTE NOTE (1) Please mount the camera or smartphone before powering on the gimbal. Unbalanced center of gravity can lead to a decrease in stability, even the camera cannot be balanced. (2) When the battery is low, please charge the gimbal. (3) When not in use, turn off the gimbal and then remove the battery. Power on the gimbal after the center of gravity of 3 axis is balanced.
2 Balance Adjustment of the Roll Axis * After adjustment, be sure to tighten the roll axis knob ring Steps (1) Stand the gimbal on level ground. (2) Loosen the roll axis knob ring (Slightly loose until the roll arm can be moved) (3) Move and adjust the position of roll arm, until the camera is parallel to the level ground.
3 Balance Adjustment of the Tilt Axis Loosen Tilt axis knob ring Step 1 (1) Stand the gimbal on level ground. (2) Loosen the tilt axis knob ring (Slightly loose until the sliding arm can be moved) (3) Move the sliding arm to the lowest position.
4. Basic Operation Modes Panning Mode(Default mode) The roll and tilt direction are fixed, and the camera moves according to the left-right movements of the user's hand. Follow Mode The roll direction is fixed, and the camera moves according to the left-right movements, up-down movements of the user's hand. Lock Mode The orientation of the camera is fixed. Reset Return to panning mode, three axises return to default position.
Joystick - operation Move to left (1) Camera lens move to left (2) Select the option on the left (3) Cancel Upward (1) Camera lens upward (2) Select the option above Up Left Right Down Move to right (1) Camera lens move to right (2) Select the option on the right (3) Confirm Downward (1) Camera lens downward (2) Select the option below Joystick Function Button - operation Note: The firmware upgrade may occur manual operation function and the actual product features do not match.
Setting Button - operation After connecting the gimbal to camera via Feiyu On App, the setting button can switch the camera modes. Using the setting button and joystick to setup parameters.
You can control the horizon angle via the horizontal adjustment button.
App - Download and Connecting * Requires iOS 9.0 or later, Android 6.0 or later Download and Install Feiyu ON App iOS Version Android Version Or search and download the Feiyu ON App on the following application platform: App Store Google play Connecting App Turn on the Bluetooth and run the App on smartphone, follow on the instructions to connect smartphone to gimbal via bluetooth. 1 2 3 www.feiyu-tech.
5. Advanced Operation Manual Lock Camera can be manually positioned while in panning mode , follow mode or lock mode. Both the pan axis and tilt axis can be manually set up. Manually move camera to desired position,and hold for half a second. New tilt and/or pan positions are automatically saved. Take the tilt axis setting for example: Auto-rotation Mode The G6 Plus gimbal can easily create constant speed movements in the auto-rotation mode.
Connecting to Camera G6 Plus gimbal can connect to the camera by Feiyu ON App. Operations available after connecting to the camera: Button Setting Button Shutter Button Operation Single tap Single tap Function Single tap in the main interface of the gimbal display can switch to the camera modes On the main interface of the gimbal display, single tap for photo shooting / start shooting / stop shooting Steps of connecting to camera: (1) Turn on your sports camera's WiFi (2.
Gimbal Initialization You can initialize your gimbal when: (1)When camera is not level (2)If not used for a long period of time (3)In case of extreme temperature variations Adjusting Steps 1 Initing Five tap Display Success Display Initing 2 3 Single tap Tap the function button for 5 consecutive times and hear the "beep" sound, and the motor will stop working and "Initing" shows up.
6. Specifications 108mm 156mm 294mm Specifications Product Name G6 Plus 3-Axis Stabilized Handheld Gimbal for Camera Max. Rolling Range 320° Max. Tilting Range Max. Panning Range Tilting Speed Panning Speed Operation Time Weight Payload Compatible Cameras for Reference 260° 360° 2°/s ~ 75°/s 3°/s ~ 150°/s 9 Hours 663g ( Not including the battery, camera, camera lens, etc.
Guilin Feiyu Technology Incorporated Company +86(0)773 2320865 Due to software and hardware improvements, your actual product might differ from the descriptions and pictures in this user manual. You can get the latest user manual from the official website. For more information, please visit our official website D I S C L A I M E R Prohibit any user for any illegal purpose. Users will be responsible for all behaviors of purchase and use products.