74210 USE AND CARE GUIDE 11 INCH WHITE ROUND FLAT PANEL FIXTURE WITH SELECTABLE COLOR TEMPERATURE VER002 FEIT ELECTRIC COMPANY | PICO RIVERA, CA | (800) 543-3348 | FAX (562) 908-6360 | www.feit.
Table of Contents Table of Contents. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Safety Information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Warranty. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Pre-Installation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Pre-Installation TOOLS REQUIRED Phillips screwdriver Power Drill 1/8 in. Drill Bit HARDWARE INCLUDED NOTE: Hardware not shown to actual size. AA BB CC DD Part Description AA Mounting Bracket 1 BB Lamp Unit 1 CC #8-32 x 1 Junction Box Screws 2 EE FF Quantity DD Plastic Anchors 2 EE Anchor Screws 2 FF Wire Nuts 3 3 WWW.FEIT.COM Please contact 1-800-543-3348 for further assistance.
Installation 1 2 4 Turning Off the Power □ Turn the power OFF at the switch and fusebox or the circuit breaker. Attaching the mounting bracket to the junction box in the ceiling □ Secure the bracket (AA) to the junction box using the junction box screws (CC) provided. Removing the fixture from the mounting bracket AA CC □ Twist and unlock the mounting bracket (AA) from the round LED flat panel (BB) fixture to remove.
Installation (continued) 5 7 Connecting the support wire □ Hook the support wire installed in the fixture to the mounting bracket (AA) while you make electrical connections. Attaching the lamp unit to the mounting bracket □ Match up the alignment arrows (1-1) indicated on the mounting bracket (AA) and the lamp unit (BB). Raise the lamp unit into the mounting bracket (AA). AA AA BB Support wire □ 6 Connecting the wires □ Feed the lamp unit wires through the mounting bracket (AA) center hole.
Color Changing Instructions 7. To change color temperatures using your existing light switch: 1. You can lock in one color temperature, change among multiple color temperatures, dim from 10%-100%, memorize the last color temperature, and reset automatically. A. Set the slide switch on the back of the fixture to “SWITCH” B. Toggle your light switch ON and OFF within 0.5-3 seconds to cycle though the 3 different color temperatures. 2.
This product is warranted to be free from defects in workmanship and materials for up to 5 years from date of purchase. If it fails to do so, please contact: Feit Electric at info@feit.com or call 1-866-326-BULB (2852) 7 a.m. - 5 p.m., PCT, Monday - Friday for instructions on replacement. Do not return the product to the store. FEITELECTRIC.COM Retain this manual for future use.
