Installation Guide
(E) 10/04
ASSEMBLY INSTRUCTIONS FOR WB1227
MURRAY FEISS
©MURRAY FEISS IMPORT LLC.
Note: Spare crystals enclosed in hardware bag
Candle Tube
Socket
Bulb
(Not Included)
BallCap Nut
Mounting Plate
IMPORTANT: TURN OFF THE POWER
AT THE MAIN FUSE OR CIRCUIT
BREAKER BOX BEFORE
STARTING INSTALLATION
Carefully unpack and identify all parts
before assembly. Bulbs are not included.
1. Place candle tubes over candelabra sockets
and screw bulbs (not included) into sockets to
secure. See relamping label on candle tube for
type and maximum allowed wattage.
2. Follow enclosed “Multiple Standard
Installation Instructions” for electrical
and fixture installation onto wall
outlet box.
3. Hang all crystal glass parts as shown on
drawing. NOTE: To replace broken
crystals extras are included in hardware
bag. Replace by gently bending open
pins, remove broken crystal, hook new
one, then close back pins. Avoid bending
pins into sharp angle.
2
2
1
2
(2) PCS. (2) PCS.
1