OBID i-scan ® MONTAGE INSTALLATION ID ISC.LRU2000 (deutsch / english) final public (B) 2006-09-03 M60801-0de-ID-B.
DEUTSCH OBID i-scan® Montage ID ISC.LRU2000 ENGLISH deutsche Version ab Seite 3 english version from page 30 FEIG ELECTRONIC GmbH Seite 2 von 56 M60801-0de-ID-B.
Montage ID ISC.LRU2000 DEUTSCH OBID i-scan® Hinweis © Copyright 2004 - 2006 by FEIG ELECTRONIC GmbH Lange Strasse 4 D-35781 Weilburg-Waldhausen Tel.: +49 6471 3109-0 http://www.feig.de Alle früheren Ausgaben verlieren mit dieser Ausgabe ihre Gültigkeit. Die Angaben in diesem Dokument können ohne vorherige Ankündigung geändert werden. Weitergabe sowie Vervielfältigung dieses Dokuments, Verwertung und Mitteilung ihres Inhalts sind nicht gestattet, soweit nicht ausdrücklich zugestanden.
DEUTSCH OBID i-scan® Montage ID ISC.LRU2000 Inhalt 1 Sicherheits- und Warnhinweise - vor Inbetriebnahme unbedingt lesen 6 2 Leistungsmerkmale der Readerfamilie ID ISC.LRU2000 7 2.1 Leistungsmerkmale.......................................................................................................7 2.2 Verfügbare Readertypen...............................................................................................7 2.3 Montage............................................................
Montage ID ISC.LRU2000 4.1.2 Netzwerkanschluss - LAN .............................................................................................25 5 6 Funkzulassungen 26 5.1 Europa (CE)..................................................................................................................26 5.2 USA (FCC) ....................................................................................................................
DEUTSCH OBID i-scan® Montage ID ISC.LRU2000 1 Sicherheits- und Warnhinweise - vor Inbetriebnahme unbedingt lesen • Das Gerät darf nur für den vom Hersteller vorgesehenen Zweck verwendet werden. • Beim Aufstellen des Gerätes im Geltungsbereich der FCC 47 CFR Part 15 ist ein Mindestabstand von 23cm zwischen Antenne und menschlichem Körper zu gewährleisten. • Die Bedienungsanleitung ist zugriffsfähig aufzubewahren und jedem Benutzer auszuhändigen.
2 2.1 Montage ID ISC.LRU2000 Leistungsmerkmale der Readerfamilie ID ISC.LRU2000 Leistungsmerkmale Der Reader ist für das Lesen von passiven Datenträgern, sogenannten „Smart Labels“, mit einer Betriebsfrequenz im UHF Bereich entwickelt. 2.2 Verfügbare Readertypen Folgende Reader und Readermodule sind z.Z. verfügbar: Readertyp Beschreibung ID ISC.LRU2000-A-EU Gerätevariante mit ACC für Europa ID ISC.LRU2000-A-FCC Gerätevariante mit ACC für USA ID ISC.
2.3 Montage ID ISC.LRU2000 Montage Der Reader ist für die Montage auf Wänden, auch im Freien, konzipiert. Zur Wandmontage befinden sich im Gehäuse vorgesehene Löcher. 300.5 90 316 DEUTSCH OBID i-scan® 161 180 Bild 2-1: Montagezeichnung FEIG ELECTRONIC GmbH Seite 8 von 56 M60801-0de-ID-B.
Montage ID ISC.LRU2000 2.3.1 Kabelverschraubungen An der Unterseite des Gehäuses befinden sich die Kabelverschraubungen. Bild 2-2: Montagezeichnung zeigt die Anordnung und in Tabelle 2-3: Kabelverschraubungen ID ISC.LRU2000 ist dargestellt, welche Kabelverschraubungen für die einzelnen Leitungen verwendet werden sollen. 6 1 7 8 3 2 9 4 5 Bild 2-2: Montagezeichnung Kabelverschraubung Größe Klemmbereich [mm] 1 M 16 4.5 – 10 Anschlusskabel Antenne 2 M 16 4.
DEUTSCH OBID i-scan® Montage ID ISC.LRU2000 2.3.2 Öffnen des Deckels In Bild 2-3: Öffnen des Deckels ist dargestellt wie sich das Gehäuse öffnen lässt. Bild 2-3: Öffnen des Deckels FEIG ELECTRONIC GmbH Seite 10 von 56 M60801-0de-ID-B.
OBID i-scan® ID ISC.LRU2000 DEUTSCH 2.4 Montage Anschlussklemmen X20 GND V1 X13 VDC V2 V3 V4 V5 X12 V6 X14 S1 T1 X11 J1 J2 . . . . J12 NO X5 X1 X6 X2 X7 GND RxD TxD X9 GND AB+ YZ+ GND AB+ YZ+ T2 O-C O-E IN+ IN- ACC J20 COM X8 X3 X4 Bild 2-4: Anschlussklemmen des Readers FEIG ELECTRONIC GmbH Seite 11 von 56 M60801-0de-ID-B.
2.5 Montage ID ISC.LRU2000 Antennenanschluss Der Anschluss der externen Antennen befindet sich auf der analogen Leiterplatte. Das maximale Anzugsdrehmoment der SMA-Buchsen beträgt 0,45 Nm. Achtung: Höhere Anzugsdrehmomente führen zur Zerstörung des Steckers. Klemme Beschreibung X1, X2 X3, X4 Anschluss der externen Antennen (Eingangsimpedanz 50Ω) Tabelle 2-4: Anschluss der externen Antenne 2.6 Versorgungsspannung Die Versorgungsspannung von 15 bis 24 VDC ist an der Klemme X13 anzuschließen.
OBID i-scan® ID ISC.LRU2000 DEUTSCH 2.7 Montage Eingänge / Ausgänge 2.7.1 Optokoppler Die Optokoppler an Klemmleiste X6 sind galvanisch von der Reader-Elektronik getrennt und müssen daher mit einer externen Spannung versorgt werden. Klemme Kurzzeichen Beschreibung 1 O-C Kollektor – Ausgang 1 2 O-E Emitter – Ausgang 1 3 IN+ + Eingang 1 4 IN- - Eingang 1 Tabelle 2-6: Pinbelegung Optokoppler X6 Rint 4 IN- 3 IN+ 2 O-E 1 O-C Uext. Rext Uext.
DEUTSCH OBID i-scan® Montage ID ISC.LRU2000 Optokopplerausgang (X6/1-2): Der Transistoranschluß, Kollektor und Emitter, des Optokopplerausgangs ist von der ReaderElektronik galvanisch getrennt und ohne interne Zusatzbeschaltung an Klemme X6 nach außen geführt. Der Ausgang muß daher mit einer externen Spannung betrieben werden. Hinweise: • Der Ausgang ist für max. 24 V DC / 30 mA ausgelegt. • Verpolung oder Überlastung des Ausgangs führt zu dessen Zerstörung.
OBID i-scan® ID ISC.LRU2000 DEUTSCH Montage 2.7.2 Relais Als Relaisausgang steht ein Wechsler zur Verfügung. Klemme Kurzzeichen Beschreibung 1 COM 2 NC Öffner 3 NO Schließer Arbeitskontakt Tabelle 2-8: Pinbelegung Relaisausgang Hinweise: • Der Relaisausgang ist für max. 24 V DC / 2 A ausgelegt. • Der Relaisausgang ist nur zum Schalten ohmscher Lasten vorgesehen. Im Falle einer induktiven Last sind die Relaiskontakte durch eine externe Schutzbeschaltung zu schützen. U ext.
DEUTSCH OBID i-scan® Montage ID ISC.LRU2000 2.7.3 Readersynchronisation Mit der Readersynchronisation können verschiedene Aktionen der Reader synchronisiert werden. Klemme Kurzzeichen Beschreibung 1 GND 2 A- - Eingang 3 B+ + Eingang 4 Y- - Ausgang 5 Z+ +Ausgang GND Tabelle 2-9: Pinbelegung Readersynchronisation X5 OUT+ (Z+) 5 OUT- (Y-) 4 IN+ (B+) 3 IN- (A-) 2 GND 1 Bild 2-8: Eingang und Ausgang der Synchronisation FEIG ELECTRONIC GmbH Seite 16 von 56 M60801-0de-ID-B.
2.8 Montage ID ISC.LRU2000 Anschluss externer Diagnose-LEDs X14 ermöglicht den Anschluss zusätzlicher externer LEDs parallel zu den internen DiagnoseLEDs. Der Anschluss der externen LEDs erfolgt gemäß Bild 2-9. Klemme Kurzzeichen Beschreibung 1 V1 Anode ext. Funktion entspricht interner LED V1 2 V2 Anode ext. Funktion entspricht interner LED V2 3 V3 Anode ext. Funktion entspricht interner LED V3 4 V4 Anode ext. Funktion entspricht interner LED V4 5 V5 Anode ext.
DEUTSCH OBID i-scan® 2.9 Montage ID ISC.LRU2000 Schnittstellen 2.9.1 RS232-Schnittstelle Der Anschluss der RS232-Schnittstelle erfolgt über X8. Die Übertragungsparameter können per Softwareprotokoll konfiguriert werden. Anschlussbelegung X8 (RS232-Schnittstelle): Klemme Kurzzeichen Beschreibung 1 GND RS232 – GND 2 RxD RS232 - RxD 3 TxD RS232 - TxD Tabelle 2-11: Pinbelegung RS232-Schnittstelle 9-pol.
Montage ID ISC.LRU2000 2.9.2 RS485/RS422 Schnittstelle Die zweite asynchrone Schnittstelle kann als RS485 oder RS422 konfiguriert werden (siehe Abschnitt 4.1: Schnittstellenkonfiguration mittels Jumper). Der Anschluss der RS4xx-Schnittstelle erfolgt über X7.
DEUTSCH OBID i-scan® Montage ID ISC.LRU2000 2.9.3 Netzwerkanschluss 2.9.3.1 LAN (nur Gerätevarianten mit ACC) Der Reader verfügt über einen Integrierten 10/100Tbase Netzwerkschnittstelle mit RJ-45Anschluß. Der Anschluss erfolgt über X11. Bei einer strukturierten Verkabelung sollte Kabel der Kategorie 5 verwendet werden. Dies garantiert einen problemlosen Betrieb bei 10Mbps oder 100Mbps.
OBID i-scan® 3.1 ID ISC.LRU2000 DEUTSCH 3 Montage Bedien- und Anzeigeelemente LEDs Tabelle 3-1 zeigt die Konfiguration der LED.
DEUTSCH OBID i-scan® 3.2 Montage ID ISC.LRU2000 Taster / Schalter Kurzzeichen Beschreibung T1 Reset-Taster RF Controller T2 Reset-Taster ACC S1 Reserviert Tabelle 3-2: Taster / Schalter - T1: Durch betätigen von T1 wird am RF-Controller ein Reset durchgeführt - T2: Durch betätigen von T2 wird am ACC ein Reset durchgeführt FEIG ELECTRONIC GmbH Seite 22 von 56 M60801-0de-ID-B.
OBID i-scan® 4.1 ID ISC.LRU2000 DEUTSCH 4 Montage Inbetriebnahme Schnittstellenkonfiguration 4.1.1 RS485/RS422 Über die Jumper J7 – J8 kann die asynchrone Schnittstelle als RS485- oder RS422-Schnittstelle konfiguriert werden. Jumper RS485 RS422 J7 Geschlossen offen J8 Geschlossen offen Tabelle 4-1: Konfiguration der RS485/RS422-Schnitstelle Es können die eventuell benötigten Abschlusswiderstände mit den Jumpern J1 bis J6 zugeschaltet werden.
DEUTSCH OBID i-scan® Montage ID ISC.LRU2000 500 Ohm J1 J8 500 J3 RS485 + J1 500 RS422 Z+ 120 Ohm 120 J6 RS422 YRS422 B+ J5 J7 RS485 - J2 J4 500 Ohm Bild 4-1: Jumper der RS485-Schnittstelle 120 J5 RS422 A500 J2 500 Bild 4-2: Jumper der RS422-Schnittstelle J12 J11 J10 J9 J8 J7 J6 J5 J4 J3 J2 J1 X7 X6 Bild 4-3: Jumper der RS485/RS422-Schnittstelle Tabelle 4-3 zeigt die Standardkonfiguration der Jumper J9 bis J12. Diese sind für die RS485 und RS422 identisch.
Montage ID ISC.LRU2000 4.1.1.1 Adresseinstellung RS485/RS422x für Busbetrieb Für den Busbetrieb bietet der Reader die Möglichkeit die benötigte Busadresse per Software zu vergeben. Die Adressvergabe erfolgt über den Host-Rechner. Mit Hilfe der Software können dem Reader die Adressen "0" bis "254" zugewiesen werden. Hinweis: Da alle Reader werksseitig die Adresse 0 eingestellt haben, müssen sie nacheinander angeschlossen und konfiguriert werden. 4.1.
DEUTSCH OBID i-scan® 5 5.1 Montage ID ISC.LRU2000 Funkzulassungen Europa (CE) Die Funkanlage entspricht, bei bestimmungsgemäßer Verwendung den grundlegenden Anforderungen des Artikels 3 und den übrigen einschlägigen Bestimmungen der R&TTE Richtlinie 1999/5/E6 vom März 99.
6 Montage ID ISC.LRU2000 Technische Daten Mechanische Daten • Gehäuse Kunststoffgehäuse mit Kühlblech • Abmessungen ( B x H x T ) 180 x 320 x 110 mm • Gewicht 2,0 kg • Schutzart IP 54 • Farbe RAL 9011 Elektrische Daten • Spannungsversorgung 15 V DC bis 24 V DC ± 5 % Noise Ripple : max. 150 mV • Leistungsaufnahme max. 30 VA • Betriebsfrequenz 869,525 MHz (EN 300 220) 865,6 – 867,6MHz (EN 302 208) 902-928MHz (FCC CFR 47 Part 15.
DEUTSCH OBID i-scan® Montage ID ISC.LRU2000 • Eingänge - 1 Optokoppler - 1 Differenzeingang max.
OBID i-scan® Installation ID ISC.LRU2000 ENGLISH Note © Copyright 2004 - 2006 by FEIG ELECTRONIC GmbH Lange Strasse 4 D-35781 Weilburg-Waldhausen Tel.: +49 6471 3109-0 http://www.feig.de With the edition of this document, all previous editions become void. Indications made in this manual may be changed without previous notice. Copying of this document, and giving it to others and the use or communication of the contents thereof are forbidden without express authority.
OBID i-scan® Installation ID ISC.LRU2000 1 Safety Instructions / Warning - Read before start-up ! 33 2 Performance Features of Reader Family ID ISC.LRU2000 34 2.1 Performance features..................................................................................................34 2.2 Available Reader types ...............................................................................................34 2.3 Installation ........................................................................
OBID i-scan® Installation ID ISC.LRU2000 4.1.2 Network connection - LAN.............................................................................................53 ENGLISH 5 6 Radio Approvals 54 5.1 Europe (CE)..................................................................................................................54 5.2 USA (FCC) ....................................................................................................................
OBID i-scan® ID ISC.LRU2000 Safety Instructions / Warning - Read before start-up ! • The device may only be used for the purpose intended by the manufacturer • When installing the device in areas covered under FCC 47 CFR Part 15 a minimum separation of 23cm between antenna and the human body must be maintained. • The operation manual should be kept readily available at all times for each user.
OBID i-scan® 2 2.1 Installation ID ISC.LRU2000 Performance Features of Reader Family ID ISC.LRU2000 Performance features ENGLISH The Reader has been developed for reading passive data carriers, so-called „Smart Labels“, using an operating frequency in the UHF range. 2.2 Available Reader types The following Readers are currently available: Reader type Description ID ISC.LRU2000-A-EU Device version with ACC for Europe ID ISC.LRU2000-A-FCC Device version with ACC for USA ID ISC.
OBID i-scan® 2.3 Installation ID ISC.LRU2000 Installation The Reader is designed for wall-mount, including outdoors. Holes for mounting on a wall are provided in the housing. 300.5 316 ENGLISH 90 161 180 Fig. 2-1 Installation drawing FEIG ELECTRONIC GmbH Page 35 of 56 M60801-0de-ID-B.
OBID i-scan® Installation ID ISC.LRU2000 2.3.1 Cable glands ENGLISH The cable glands are located on the underside of the housing. Fig. 2-2: Installation drawing shows the arrangement, and Table 2-3: Cable glands for ID ISC.LRU2000 indicates which cable glands should be used for the individual lines. 6 1 7 8 3 2 9 4 5 Fig. 2-2 Installation drawing Cable gland Size Clamping range [mm] 1 M 16 4.5 – 10 Antenna cable 2 M 16 4.5 – 10 Antenna cable 3 M 16 4.
OBID i-scan® Installation ID ISC.LRU2000 2.3.2 Opening the cover ENGLISH Fig. 2-3 Opening the cover shows how to open up the housing. Fig. 2-3: Opening the cover FEIG ELECTRONIC GmbH Page 37 of 56 M60801-0de-ID-B.
OBID i-scan® 2.4 Installation ID ISC.LRU2000 Terminals X20 GND X13 VDC V2 V3 V4 V5 X12 V6 X14 S1 T1 X11 X5 X1 NO J1 J2 . . . . J12 X6 X2 X7 X3 GND RxD TxD X9 GND AB+ YZ+ T2 O-C O-E IN+ IN- ACC J20 GND AB+ YZ+ ENGLISH V1 COM X8 X4 Fig. 2-4: Reader terminals FEIG ELECTRONIC GmbH Page 38 of 56 M60801-0de-ID-B.
OBID i-scan® 2.5 Installation ID ISC.LRU2000 Antenna connection The external antenna is connected on the analog circuit board. The maximum tightening torque for the SMA sockets is 0.45 Nm. Terminal X1, X2 X3, X4 ENGLISH Caution: Exceeding the tightening torque will destroy the plug. Description Connection for external antennas (input impedance 50Ω) Table 2-4: External antenna connection FEIG ELECTRONIC GmbH Page 39 of 56 M60801-0de-ID-B.
OBID i-scan® 2.6 Installation ID ISC.LRU2000 Supply voltage ENGLISH The supply voltage of 15 to 24 VDC is connected to Terminal X13. Terminal Abbreviation Description X13 / Pin 1 VDC Vcc – supply voltage X13 / Pin 2 GND Ground – supply voltage VDC GND Table 2-5: Pin-outs for supply voltage 21 X13 Fig. 2-5 Connecting the supply voltage Note: • Reversing the supply voltage polarity may destroy the device. FEIG ELECTRONIC GmbH Page 40 of 56 M60801-0de-ID-B.
OBID i-scan® 2.7 Installation ID ISC.LRU2000 Inputs / Outputs The optocouplers on Terminal X6 are galvanically isolated from the Reader electronics and must therefore be externally supplied. Terminal Abbreviation Description 1 O-C Collector – Output 1 2 O-E Emitter – Output 1 3 IN+ + Input 1 4 IN- - Input 1 Table 2-6: Optocoupler pin-outs X6 Rint 4 IN- 3 IN+ 2 O-E 1 O-C Uext. Rext Uext. Fig.
OBID i-scan® Installation ID ISC.LRU2000 Optocoupler output (X6/1-2): The transistor connections, collector and emitter, of the optocoupler output are galvanically isolated from the Reader electronics and are carried to the outside without any internal ancillary circuitry on Terminal X6. The output must therefore be powered by an external power supply. ENGLISH Note: • The output is configured for max. 24 V DC / 30 mA. • Polarity reversal or overload on the output will destroy it.
OBID i-scan® Installation ID ISC.LRU2000 2.7.2 Relay A relay output is provided in the form of a changeover relay. Abbreviation Description 1 COM Working contact 2 NC Normally closed 3 NO Normally open ENGLISH Terminal Table 2-8: Relay output pin-outs Notes: • The relay output is configured for max. 24 V DC / 2 A. • The relay output is intended for switching resistive loads only.
OBID i-scan® Installation ID ISC.LRU2000 2.7.3 Reader synchronization ENGLISH Reader synchronization can be used to synchronize various Reader actions. Terminal Abbreviation Description 1 GND 2 A- - Input 3 B+ + Input 4 Y- - Output 5 Z+ + Output GND Table 2-9: Reader synchronization pin-outs X5 OUT+ (Z+) 5 OUT- (Y-) 4 IN+ (B+) 3 IN- (A-) 2 GND 1 Fig. 2-8: Synchronization input and output FEIG ELECTRONIC GmbH Page 44 of 56 M60801-0de-ID-B.
OBID i-scan® 2.8 Installation ID ISC.LRU2000 External diagnostic LED connections X14 allows for connection of additional external LEDs in parallel with the internal diagnostic LEDs. Terminal Abbreviation 1 V1 Anode ext. Function same as internal LED V1 2 V2 Anode ext. Function same as internal LED V2 3 V3 Anode ext. Function same as internal LED V3 4 V4 Anode ext. Function same as internal LED V4 5 V5 Anode ext.
OBID i-scan® 2.9 Installation ID ISC.LRU2000 Interfaces ENGLISH 2.9.1 RS232 interface The RS232 interface is connected on X8. The transmission parameters can be configured by means of software protocol. Pin configuration X8 (RS232 interface): Terminal Abbreviation Description 1 GND RS232 – GND 2 RxD RS232 - RxD 3 TxD RS232 - TxD Table 2-11: RS232 interface pin-outs 9-pol. D-SUB-Jack X8 3 2 1 TxD PC RxD GND X8 / 1 X8 / 2 X8 / 3 <−> Pin 5 <−> Pin 3 <−> Pin 2 Fig.
OBID i-scan® Installation ID ISC.LRU2000 2.9.2 RS485/RS422 interface The second asynchronous interface can be configured for RS485 or RS422 (see Section Interface configuration). ENGLISH The RS485/RS422 interface is connected on X7.
OBID i-scan® Installation ID ISC.LRU2000 2.9.3 Network connection 2.9.3.1 LAN (only device versions with ACC) ENGLISH The Reader has an integrated 10/100Tbase network port for an RJ45. Connection is made on X11. With structured cabling Cat 5 cables should be used. This ensure reliable operation at 10Mbps or 100Mbps. Pin configuration for X8 (network interface): Terminal Abbreviation Description 1 TX+ Transmit Data + 2 TX- Transmit Data - 3 RX+ Receive Data + 4 VETH+ n.c. 5 VETH+ n.
OBID i-scan® 3.1 ID ISC.LRU2000 Operating and Display Elements LEDs Table 3-1 shows the LED configuration.
OBID i-scan® 3.2 Installation Buttons / Switches Abbreviation ENGLISH ID ISC.LRU2000 Description T1 RF Controller reset button T2 ACC reset button S1 Reserved Table 3-2: Buttons / Switches - T1: Pressing T1 resets the RF Controller - T2: Pressing T2 resets the ACC FEIG ELECTRONIC GmbH Page 50 of 56 M60801-0de-ID-B.
OBID i-scan® 4.1 ID ISC.LRU2000 Startup Interface configuration 4.1.1 RS485/RS422 Jumpers J7 – J8 are used to configure the asynchronous interface as an RS485 or R422 port. Jumper RS485 RS422 J7 closed open J8 closed open Table 4-1: Configuration of the RS485/RS422 port Any termination resistors needed can be enabled using jumpers J1 through J6.
OBID i-scan® Installation ID ISC.LRU2000 500 Ohm J1 J8 J1 500 RS422 Z+ 120 Ohm 120 J6 RS422 YRS422 B+ J5 J7 ENGLISH 500 J3 RS485 + J2 RS485 J4 500 Ohm Fig. 4-1: RS485 interface jumpers 120 J5 RS422 A500 J2 500 Fig. 4-2: RS422 interface jumpers J12 J11 J10 J9 J8 J7 J6 J5 J4 J3 J2 J1 X7 X6 Fig. 4-3: RS485/RS422 interface jumpers shows the standard configuration of jumpers J9 through J12. These are identical for RS485 and RS422.
OBID i-scan® Installation ID ISC.LRU2000 4.1.1.1 Address assignment of RS485/RS422 for bus operation For bus operation the Reader can be assigned the required bus address via software. Note: Since all Readers are factory set with address „0“, they must be connected and configured one after the other. 4.1.2 Network connection - LAN The prerequisite for using TCP/IP protocol is that each device has a unique address on the network. All Readers have a factory set IP address.
OBID i-scan® 5 5.1 Installation ID ISC.LRU2000 Radio Approvals Europe (CE) ENGLISH When used according to regulation, this radio equipment conforms with the basic requirements of Article 3 and the other relevant provisions of the R&TTE Guideline 1999/E6 dated March 99. Restrictions for operating the ID ISC.LRU2000 (Effective: July 2006): When operating the ID ISC.
OBID i-scan® 6 Installation ID ISC.LRU2000 Technical Data Mechanical Data Plastic enclosure with cooling fin • Dimensions ( W x H x D ) 180 x 320 x 110 mm • Weight 2.0 kg • Enclosure rating IP 54 • Color RAL 9011 ENGLISH • Housing Electrical Data • Supply voltage 15 V DC to 24 V DC ± 5 % Noise Ripple : max. 150 mV • Power consumption max. 30 VA • Operating frequency 869.525 MHz (EN 300 220) 865.6 – 867.6 MHz (EN 302 208) 902-928 MHz (FCC CFR 47 Part 15.
ENGLISH OBID i-scan® Installation ID ISC.