IDENTIFICATION INSTALLATION ID ANT.
IDENTIFICATION ID ANT.U580/290-FCC Note Note Note © Copyright by FEIG ELECTRONIC GmbH Lange Strasse 4 D-35781 Weilburg (Germany) Tel.: +49 6471 3109-0 http://www.feig.de identification-support@feig.de With the edition of this document, all previous editions become void. Indications made in this manual may be changed without previous notice. Copying of this document and giving it to others and the use or communication of the contents thereof are forbidden without express authority.
IDENTIFICATION ID ANT.U580/290-FCC Contents Contents Contents 1 Safety Instructions 4 2 Performance Features of ID ANT.
IDENTIFICATION ID ANT.U580/290-FCC 1 Safety Instructions 1 Safety Instructions Safety Instructions ► ► ► ► ► ► ► ► ► ► ► The device may only be used for the intended purpose designed by the manufacturer. The manual must be read thoroughly and kept safe and accessible for all users. Unauthorized changes and the use of spare parts and additional devices which have not been sold or recommended by the manufacturer may cause fire, electric shocks or injuries.
IDENTIFICATION ID ANT.U580/290-FCC 2 Performance Features 2 Performance Features of ID ANT.U580/290-FCC Performance Features The antenna ID ANT.U580/290-FCC is a circular polarized antenna and can be used at operating frequencies in the UHF range from 902 MHz – 928 MHz. Due to the circular polarization a reading of transponders is possible in random orientations. The antenna is optimized for the UHF frequency band dedicated to RFID applications under FCC.
IDENTIFICATION ID ANT.U580/290-FCC 3 Installation 3 Installation Installation The ID ANT.U580/290-FCC is designed to be mounted outdoors. Four holes for M5 screws are provided on the backside of the housing for mounting on a VESA bracket. The screws used should have a screw-in depth of maximum 12 mm (0.5"). For secondary protection the antenna can be secured by means of an eye bolt, that should be fixed with screw locking varnish, and e.g. a wire rope. The suitable accessory ID ANT.
IDENTIFICATION ID ANT.U580/290-FCC 3 Installation Fig. 2: Dimensional drawing - side view CAUTION: • Do not exceed the bending radius of the connection cable (15 mm static, 30 mm dynamic) to prevent damage and a decrease of the antenna performance. • To keep the full protection class and to prevent performance losses of the antenna it needs to be ensured that the screw plug is not damaged.
IDENTIFICATION ID ANT.U580/290-FCC 4 Accessories 4 Accessories Accessories For the ID ANT.U580/290-FCC following optional accessories are available: Order Number Article Description 5241.001.00 ID ANT.C2-B UHF Antenna Cable SMA/TNC 2 m 5241.002.00 ID ANT.C6-B UHF Antenna Cable SMA/TNC 6 m 5243.001.00 ID ANT.C2-C UHF Antenna Cable R-TNC/TNC 2 m 5243.002.00 ID ANT.C6-C UHF Antenna Cable R-TNC/TNC 6 m 5335.000.00 ID ANT.C6-x UHF Antenna Extension Cable TNC/TNC 6 m 5254.000.00 ID ANT.
IDENTIFICATION ID ANT.U580/290-FCC 5 VSWR 5 VSWR VSWR The typical VSWR of the antenna ID ANT.U580/290-FCC is < 1,25:1.
IDENTIFICATION ID ANT.U580/290-FCC 6 Antenna Pattern 6 Beamwidth Antenna Pattern The 3 dB beamwidth of the antenna is 65 ° x 30 °. Fig.
IDENTIFICATION ID ANT.U580/290-FCC 7 Technical Data 7 Technical Data Technical Data Mechanical Data Housing Plastic (ASA-PC) Aluminum Dimension (W x H x D) 576 mm x 288 mm x 80 mm (22.7" x 11.3" x 3.