INSTALLATION ID CPRPOS Card reader for contactless and contact smart cards final – public (B) 2015-07-27 – ID CPRPOS User Manual-01.
OBID® classic-pro Installation ID CPRPOS Note Copyright 2015 by FEIG ELECTRONIC GmbH Lange Strasse 4 D-35781 Weilburg Tel.: +49 6471 3109-0 http://www.feig.de With the edition of this document, all previous editions become void. Indications made in this manual may be changed without previous notice. The reproduction, distribution and utilization of this document as well as the communication of its contents to others without express authorization is prohibited.
OBID® classic-pro Installation ID CPRPOS Contents 1. Safety Instructions / Warning - Read before start-up ! 4 2. Characteristics of the ID CPRPOS 5 2.1. Scope of delivery ............................................................................................................... 5 2.2. Available accessories and spare parts ............................................................................ 6 3. Dimensions 7 4. Connections 8 4.1. Ethernet interface ....................................
OBID® classic-pro Installation ID CPRPOS 1. Safety Instructions / Warning - Read before start-up ! • The device may only be used for the intended purpose designed by for the manufacturer. • The operation manual should be conveniently kept available at all times for each user. • Unauthorized changes and the use of spare parts and additional devices which have not been sold or recommended by the manufacturer may cause fire, electric shocks or injuries.
OBID® classic-pro Installation ID CPRPOS 2. Characteristics of the ID CPRPOS The ID CPRPOS is a smart card reader for contactless and contact smart cards according to ISO 14443-A/B and ISO 7816. The reader is designed as desktop device and is due to the support of different chip types like mifare classic, mifare DESFire and mifare PLUS suitable for a wide range of applications.
OBID® classic-pro Installation ID CPRPOS 2.2. Available accessories and spare parts Table 1: Available accessories and spare parts Order Number Article Description 4219.000.00 OBID myAXXESS ID NET.5V-EU Power supply unit (5 V DC / 1 A); Length of the connection cable: 1,5 m RS232 connection cable incl. connector for power supply - Host connector: D-SUB 9 poles 4218.000.00 ID CAB.
OBID® classic-pro Installation ID CPRPOS 3. Dimensions The ID CPRPOS is designed as desktop device. Its small form factor offers the possibility to place the reader directly on a sales counter or at a cashier station. Due to its rubber feet the reader is suitable for slippery undergrounds. Figure 2: Top view Figure 3: Side view FEIG ELECTRONIC GmbH Page 7 of 18 ID CPRPOS User Manual-01.
OBID® classic-pro Installation ID CPRPOS 4. Connections Figure 4: ID CPRPOS - position of the connectors Ethernet interface (RJ-45) USB interface (Mini-USB) RS232 interface and power supply (RJ-12) NOTE: Only one host interface should be used at the same time. The usage of more than one host interface at the same time can cause malfunctions. FEIG ELECTRONIC GmbH Page 8 of 18 ID CPRPOS User Manual-01.
OBID® classic-pro Installation ID CPRPOS 4.1. Ethernet interface The ID CPRPOS has an integrated 10/100 base-T network port with a common RJ-45 connector and an automatic “crossover correction”. With structured cabling CAT5 cables should be used. This ensures a reliable operation at 10 Mbps and 100 Mbps. The prerequisite for using TCP/IP protocol is that each device has a unique address on the network. All readers have a factory set IP address.
OBID® classic-pro Installation ID CPRPOS 4.2. USB interface The ID CPRPOS is equipped with a USB on-the-go interface (USB mini jack). It allows a direct connection to a host system for controlling, configuration and firmware update of the device (ID CPRPOS is USB slave). In addition the ID CPRPOS offers the possibility to connect an external USB memory stick to the electronic unit by means of a USB on-the-go adaptor (ID CPRPOS is USB master).
OBID® classic-pro Installation ID CPRPOS 4.3. RS232 interface / Power supply 6 1 Figure 7: Pin assignment RJ-12 jack Table 3: Pin assignment RJ-12 jack Pin No. Name Function 1 Vcc 5 V DC, approx. 500 mA 2 RS232-RxD 3 RS232-TxD 4 nc not connected 5 nc not connected 6 GND Ground RS232 interface By using USB or Ethernet as communication interface the power supply unit included could be directly connected to the RJ-12 jack of the device.
OBID® classic-pro Installation ID CPRPOS 5. Display and LED display LED Figure 8: Display and LED The ID CPRPOS is equipped with a display as well as LED for user guidance and to show status information. 5.1. Display A connected host system can send text messages via the interfaces RS232, USB, and Ethernet to the integrated graphic display to realise a user guidance. Customised graphics (monochrome Bitmaps with size 128 x 64 dots; e.g.
OBID® classic-pro Installation ID CPRPOS 5.2. LED The three LEDs of the ID CPRPOS indicate the status of the device for the user. The device is equipped with 1 green, 1 yellow, and 1 red LED. Figure 9: Position of the LED on the ID CPRPOS Table 4: LED on the ID CPRPOS LED green red yellow Description Communication with a contactless smart card Error - In table 4 the meaning of the LEDs with standard configuration is described.
OBID® classic-pro Installation ID CPRPOS 6. Installation of a Secure Access Module (SAM) To install a secure access module (SAM) the bottom part of the housing has to be opened. After removing the 4 screws the bottom part of the housing could be opened. Figure 10: Opening of the housing A socket is located on the PCB in which the SAM can be plugged in. To open the socket the cover of the socket has to be pushed slightly in direction “OPEN”. Afterwards it can be lifted.
OBID® classic-pro Installation ID CPRPOS 7. Radio Approvals 7.1. Europe (CE) When used according to regulation, this radio equipment conforms with the basic requirements of Article 3 and the other relevant provisions of the R&TTE Guideline 1999/EC dated March 99. Equipment Classification according ETSI EN 300 330: Class 2 7.2.
OBID® classic-pro Installation ID CPRPOS Warning: Changes or modification made to this equipment not expressly approved by FEIG ELECTRONIC GmbH may void the FCC authorization to operate this equipment. Installation with FCC / IC Approval: FCC-/IC-NOTICE: To comply with FCC Part 15 Rules in the United States / with IC Radio Standards in Canada, the system must be professionally installed to ensure compliance with the Part 15 certification / IC certification.
OBID® classic-pro Installation ID CPRPOS 8.Technical Data Table 5: Technical Data ID CPRPOS Housing plastic Dimensions 92 mm x 161 mm x 58 mm Weight approx. 250 g Protection class IP20 operation -20 °C up to +70 °C (-4 °F up to +158 °F) storage -30 °C up to +80 °C (-22 °F up to +176 °F) Temperature range Relative air humidity max. 95 % Supply voltage +5 V DC ± 5 % Current consumption approx.
OBID® classic-pro Installation ID CPRPOS Europe EN 300 330 USA FCC 47 CFR Part 15 Radio Approval Canada IC RSS-Gen, RSS-210 EMC EN 301 489 Environmental (shock, vibration, climate) IEC 60068 EN 60950 Health and Safety EN 50364 WEEE - 2002/96/EC Waste and Hazardous Substances RoHS - 2011/65/EC Function FEIG ELECTRONIC GmbH tested according to EMVCo Contactless/Contact Level 1 Page 18 of 18 ID CPRPOS User Manual-01.