® OBID classic-pro MONTAGE INSTALLATION ID CPR.M02 (deutsch / english) final public (B) 2003-02-11 M21001-0de-ID-B.
Montage ID CPR.M02 DEUTSCH OBID® classic-pro FEIG ELECTRONIC GmbH Seite 2 von 39 M21001-0de-ID-B.
Montage ID CPR.M02 DEUTSCH OBID® classic-pro ENGLISH deutsche Version ab Seite 4 english version from page 22 FEIG ELECTRONIC GmbH Seite 3 von 39 M21001-0de-ID-B.
DEUTSCH OBID® classic-pro Montage ID CPR.M02 Hinweis Copyright 2002 by FEIG ELECTRONIC GmbH Lange Straße 4 D-35781 Weilburg-Waldhausen Tel.: +49 6471 3109-0 http://www.feig.de Ausgabe: er/03/02/11 - m21001-0de-id-b.doc Alle früheren Ausgaben verlieren mit dieser Ausgabe ihre Gültigkeit. Die Angaben in diesem Handbuch können ohne vorherige Ankündigung geändert werden.
Montage ID CPR.M02 Inhalt 1. Sicherheits- und Warnhinweise - vor Inbetriebnahme unbedingt lesen 6 2. Leistungsmerkmale des Readermoduls ID CPR.M02 7 2.1. Leistungsmerkmale.......................................................................................................... 7 2.2. Verfügbare Modultypen.................................................................................................... 7 2.3. Lieferumfang................................................................................
DEUTSCH OBID® classic-pro Montage ID CPR.M02 1. Sicherheits- und Warnhinweise - vor Inbetriebnahme unbedingt lesen • Das Gerät darf nur für den vom Hersteller vorgesehenen Zweck verwendet werden. • Die Bedienungsanleitung ist zugriffsfähig aufzubewahren und jedem Benutzer auszuhändigen.
Montage ID CPR.M02 2. Leistungsmerkmale des Readermoduls ID CPR.M02 2.1. Leistungsmerkmale Das Readermodul ID CPR.M02 ist für das Lesen und Schreiben von passiven Transpondern mit einer Betriebsfrequenz von 13,56 MHz entwickelt worden. Es eignet sich für alle Anwendungen, bei denen geringe Lesereichweiten bei kleinen Abmessungen des Readers benötigt werden. Das Modul besitzt eine integrierte Antenne, wodurch keine externen Antennenkomponenten mehr benötigt werden. 2.2.
Montage ID CPR.M02 3. Montage und Anschluss 3.1. Abmessungen Bild 3.1-1 zeigt die Maßzeichnung des Readermoduls ID CPR.M02. 50,0 44,0 V1 V2 ,3 Ø3 X4 X1 44,0 ,3 Ø3 C405 J1 2,1 26,1 50,0 C315 X3 Ø3,3 11,5 Ø3,3 14,0 DEUTSCH OBID® classic-pro Bild 3.1-1: Maßzeichnung des Readermoduls ID CPR.M02 FEIG ELECTRONIC GmbH Seite 8 von 39 M21001-0de-ID-B.
Montage ID CPR.M02 3.2. Anschluss Bild 3.2-1 und Tabelle 3.2-1 zeigen die Belegung der Anschlußstiftleiste X1. Die Stiftleiste ist für Flachbandkabelanschluß mittels IDC-Federleiste mit Rastermaß 2,54 mm ausgelegt. X1 10 9 8 7 6 5 4 3 V1V2 X4 X1 C405 J1 2 1 C315 X3 Bild 3.2-1: Belegung der Anschlußstiftleiste X1 Beschreibung X1 Pin-Nr.
DEUTSCH OBID® classic-pro Montage ID CPR.M02 3.2.1. Spannungsversorgung Für die Spannungsversorgung des ID CPR.M02-A/B dürfen nur geregelte DC-Spannungen verwendet werden. Im Falle von getakteten Netzteilen zur Versorgung des Moduls ist auf eine ausreichende Filterung der Versorgungsspannung zu achten. Störungen der Versorgungsspannung können sich in einer Reduzierung der Lese- und Schreibreichweite des Modules auswirken. Die Länge des Zuleitungskabels der Spannungsversorgung sollte möglichst kurz sein.
Montage ID CPR.M02 3.2.2. RS232-Schnittstelle Die Länge des Zuleitungskabels der RS232-Schnittstelle sollte möglichst kurz sein. Sie darf 3 m nicht überschreiten. X1 Pin-Nr. 3 4, 9 5 * ** Beschreibung Kurzzeichen ID CPR.M02-B TxD * RS232-TTL - Transmit Data GND ** GND RxD * RS232-TTL - Receive Data Bezeichnungen der Signale aus Sichtweise des Readermoduls. Die GND-Pins 4 und 9 sind auf dem Readermodul direkt miteinander verbunden Tabelle 3.2.
DEUTSCH OBID® classic-pro Montage ID CPR.M02 3.2.3. Daten-/Taktschnittstelle Die Länge des Zuleitungskabels der Daten-/Taktschnittstelle sollte möglichst kurz sein. Sie darf 3 m nicht überschreiten. Beschreibung X1 Pin-Nr. Kurzzeichen 1 DAT Datenleitung der Daten-/Taktschnittstelle 2 CLK Taktleitung der Daten-/Taktschnittstelle 7 CLS CLS-Leitung der Daten-/Taktschnittstelle 4, 9 GND * GND ID CPR.
Montage ID CPR.M02 3.2.4. Optionales Security-Modul ID SAM.M02 Bei Bedarf kann optional auf die Stiftleisten X3 und X4 ein Security-Modul vom Typ ID SAM.M02 aufgesteckt werden. Das Security-Modul ID SAM.M02 bietet zusätzliche Sicherheit durch kryptographische Datenübertragung zwischen Reader und Transponder. V1 V2 X4 50,0 X1 C315 X3 11,5 10,0 25,0 Bild 3.2.4-1: Maßzeichnung ID CPR.M02 mit ID SAM.M02 FEIG ELECTRONIC GmbH Seite 13 von 39 M21001-0de-ID-B.
DEUTSCH OBID® classic-pro Montage ID CPR.M02 3.3. Anzeigeelemente Das Readermodul ID CPR.M02 besitzt eine grüne LED (V1) und eine rote LED (V2) als Anzeigeelemente (siehe Bild 3.3-1). V1 V2 X4 X1 J1 Bild 3.3-1: Position der LED´s V1 und V2 Die Funktionen der beiden LED´s können per Softwareprotokoll konfiguriert werden. Ergänzend dazu besteht auch die Möglichkeit beide LED´s direkt durch ein weiteres Softwareprotokoll anzusteuern. Tabelle 3.3-1 zeigt die Standardeinstellung von V1 und V2.
Montage ID CPR.M02 3.4. Bedienelemente 3.4.1. Betriebs-/Programmier-Mode: Jumper J1 Der Jumper J1 dient zur Konfiguration des Betriebs- bzw. Programmier-Mode des ID CPR.M02. Im Standardbetrieb ist der Jumper auf die Position 1-2 gesteckt (siehe Bild 3.4.1-1). Der Reader befindet sich dann im normalen Betriebsmode. Wird der Jumper auf die Position 2-3 gesteckt, so startet nach einem Reset der integrierte Hardware Bootloader.
DEUTSCH OBID® classic-pro Montage ID CPR.M02 3.4.2. Nachgleich der internen Antenne: Trimmkondensator C315 Die Antenne des ID CPR.M02 kann durch verschiedene Umgebungseinflüsse wie zum Beispiel Metalle verstimmt werden (siehe Kapitel 3.5). Diese Verstimmungen können in einem gewissen Rahmen durch den Trimmkondensator C315 ausgeglichen werden. V1V2 X4 X1 Trimmkondensator C405: C405 J1 C315 X3 NICHT VERÄNDERN !!! Trimmkondensator C315: Nachgleich der internen Antenne Bild 3.4.
Montage ID CPR.M02 Wird der maximale Wert der Signalamplitude bei der Minimum- oder Maximumposition des Trimmkondensators erreicht (Bild 3.4.3-3), so ist Vorsicht geboten. In diesem Fall ist meist die Verstimmung der Antenne durch die Umgebung zu groß und kann durch den Trimmkondensator nicht vollständig ausgeglichen werden. Beschriftung Minimale Kapazität Maximale Kapazität Bild 3.4.
DEUTSCH OBID® classic-pro Montage ID CPR.M02 3.5. Montagehinweise Folgende mögliche Beeinflussungen durch die Umgebung sollten beim Einbau eines ID CPR.
Montage ID CPR.M02 3.5.3. EMV-Beeinflussung über magnetische Felder Da im vorliegenden Fall der RF-ID-Technik die Kommunikation zwischen Reader und Transponder mittels der Modulation eines magnetischen Feldes abläuft, können sich magnetische Wechselfelder in der Nähe der Antenne negativ auf dessen Funktion auswirken. Zu den Quellen solcher magnetischen Störfelder gehören zum Beispiel Spulen innerhalb eines primär oder sekundär getakteten Netzteils.
DEUTSCH OBID® classic-pro Montage ID CPR.M02 4. Funkzulassungen 4.1. Europa (CE) Die Funkanlage entspricht, bei bestimmungsgemäßer Verwendung den grundlegenden Anforderungen des Artikels 3 und den übrigen einschlägigen Bestimmungen der R&TTE Richtlinie 1999/5/E6 vom März 99. 4.2. USA (FCC) FCC ID: PJMCPRM02 This device complies with Part 15 of the FCC Rules.
Montage ID CPR.M02 DEUTSCH OBID® classic-pro 5. Technische Daten Mechanische Daten • Abmessungen ( B x H x T ) 50mm x 50mm x 14 mm • Anschlussstecker 10 polige Stiftleiste mit Rastermaß 2,54mm Elektrische Daten • Spannungsversorgung Version –B 5 V DC ± 5% • Leistungsaufnahme max. 1,5 W • Betriebsfrequenz 13.
OBID® classic-pro Installation ID CPR.M02 ENGLISH Note Copyright 2002 by FEIG ELECTRONIC GmbH Lange Strasse 4 D-35781 Weilburg-Waldhausen Tel.: +49 6471 3109-0 http://www.feig.de Edition: er/03/02/11 - m21001-0de-id-b.doc With the edition of this manual, all previous editions become void. Indications made in this manual may be changed without previous notice. Copying of this document, and giving it to others and the use or communication of the contents thereof are forbidden without express authority.
OBID® classic-pro Installation ID CPR.M02 6. Safety Instructions / Warning - Read before start-up ! 24 7. Performance Characteristics of the ID CPR.M02 Reader 25 7.1. Performance Characteristics ......................................................................................... 25 7.2. Available module types.................................................................................................. 25 7.3. Scope of delivery..................................................................
OBID® classic-pro Installation ID CPR.M02 ENGLISH 6. Safety Instructions / Warning - Read before start-up ! • The device has to be used only for the purpose designed by the manufacturer. • The operation manual has to be stored available at any time and has to be handed over to each user. • Unauthorized changes and the use of spare parts and additional devices which have not been sold or recommended by the manufacturer may cause fire, electric shocks or injuries.
OBID® classic-pro Installation ID CPR.M02 7. Performance Characteristics of the ID CPR.M02 Reader The ID CPR.M02 Reader Module is designed for reading and writing passive transponders having an operating frequency of 13.56 MHz. It is suitable for any application in which short read ranges and small reader dimensions are required. The module has an integrated antenna, eliminating the need for any external antenna components. 7.2.
OBID® classic-pro Installation ID CPR.M02 8. Installation and wiring 8.1. Dimensions ENGLISH Fig. 3.1-1 shows the dimensions of the ID CPR.M02 Reader Module 50,0 44,0 V1 V2 ,3 Ø3 X4 X1 C405 44,0 J1 2,1 26,1 50,0 ,3 Ø3 C315 X3 Ø3,3 11,5 14,0 Ø3,3 Fig. 3.1-1: Dimensions of the ID CPR.
OBID® classic-pro Installation ID CPR.M02 8.2. Wiring Fig. 3.2-1 and Table 3.2-1 show the pin assignments for Terminal X1. The pin connector is designed for flat cable connection using an IDC multipoint socket connector with 2.54 mm pin spacing. 9 8 7 6 5 4 3 V1V2 X4 X1 C405 J1 2 ENGLISH X1 10 1 C315 X3 Fig. 3.2-1: Pin assignments for Terminal X1 Description X1 Pin no.
OBID® classic-pro Installation ID CPR.M02 8.2.1. Supply voltage The ID CPR.M02-A/B must be supplied only by a regulated power supply. If switching power supplies are used with the module, be sure that there is adequate filtering. ENGLISH Noise from the power supply can result in a reduction of the read/write range of the module. The cable length from the power supply should be as short as possible, and should in any case not exceed 3 m. Description X1 Pin no.
OBID® classic-pro Installation ID CPR.M02 8.2.2. RS232 interface The length of the cable to the RS232 interface should be kept as short as possible, and must in any case not exceed 3 m. 3 4, 9 5 * ** Description Function ENGLISH X1 Pin no. ID CPR.M02-B TxD * RS232-TTL - Transmit Data GND ** GND RxD * RS232-TTL - Receive Data Signal names as seen by the Reader Module. GND-Pins 4 and 9 are to be connected directly to each other on the Reader Module Table 3.2.
OBID® classic-pro Installation ID CPR.M02 8.2.3. Data/Clock interface ENGLISH The length of the cable to the data/clock interface should be kept as short as possible. It must not exceed 3 m. Description X1 Pin no. Function 1 DAT Data line for the data/clock interface 2 CLK Clock line for the data/clock interface 7 CLS CLS line for the data/clock interface 4, 9 GND * GND * ID CPR.M02-B GND-Pins 4 and 9 are to be connected directly to each other on the Reader Module Table 3.2.
OBID® classic-pro Installation ID CPR.M02 8.2.4. Optional Security Module ID SAM.M02 If needed, the optional ID SAM.M02 Security Module can be connected to terminals X3 and X4. V1 V2 ENGLISH The ID SAM.M02 Security Module provided additional security by using cryptographic data transmission between the reader and transponder. X4 50,0 X1 C315 X3 11,5 10,0 25,0 Fig. 3.2.4-1: Dimensions of ID CPR.M02 with ID SAM.M02 FEIG ELECTRONIC GmbH Page 31 of 39 M21001-0de-ID-B.
OBID® classic-pro Installation ID CPR.M02 8.3. Display elements ENGLISH The ID CPR.M02 Reader Module has a green LED (V1) and a red LED (V2) which are used as display elements (Fig. 3.3-1). V1 V2 X4 X1 J1 Fig. 3.3-1: Position of LEDs V1 and V2 The functions of both LEDs can be configured using software protocol. It is also possible to control both LEDs directly using an additional software protocol. Table 3.3-1 shows the standard setting for V1 and V2.
OBID® classic-pro Installation ID CPR.M02 8.4. Operating elements 8.4.1. Operating/Programming Mode: Jumper J1 In standard operation the jumper is set to Position 1-2 (see Fig. 4.3.1-1). The reader is then in normal operating mode. If the jumper is set to Position 2-3, the integrated hardware bootloader starts after a reset. Since the reader’s firmware however also has a software bootloader, the hardware bootloader option should be used only for installing the software bootloader.
OBID® classic-pro Installation ID CPR.M02 8.4.2. Retuning the internal antenna: Trim capacitor C315 ENGLISH The antenna of the ID CPR.M02 can be detuned as a result of various ambient conditions such as nearby metal objects (see Section 8.5). This detuning can be compensated to some degree using the trim capacitor C315. V1 V2 X4 X1 Trim capacitor C405: C405 J1 C315 X3 DO NOT CHANGE !!! Trim capacitor C315: Retuning the internal antenna Fig. 3.4.
OBID® classic-pro Installation ID CPR.M02 Use caution when the maximum value of the signal amplitude is reached at the minimum or maximum position of the trim capacitor (Fig. 3.4.3-3). This usually means the antenna is too severely detuned by the surroundings and can no longer be fully compensated by the trim capacitor. Minimum Minimale Kapazität capacitance Maximum Maximale Kapazität capacitance Fig. 3.4.
OBID® classic-pro Installation ID CPR.M02 8.5. Installation notes ENGLISH Be aware of the following possible environmental factors when installing an ID CPR.M02 into another device : • Effects from nearby metal objects ⇒ Detuning of the integrated antenna ⇒ Impaired propagation of the antenna’s magnetic field • EMC effects on cables ⇒ Impaired communication between reader and transponder • EMC effects from magnetic fields ⇒ Impaired communication between reader and transponder 8.5.1.
OBID® classic-pro Installation ID CPR.M02 8.5.3. EMC effects from magnetic fields Sources of such magnetic interference fields include coils within a primary or secondary switching power supply. When determining the position of the reader and antenna within a device, check the device for any possible sources of interference as described above. If necessary, use shielding to suppress such interference. FEIG ELECTRONIC GmbH Page 37 of 39 M21001-0de-ID-B.
OBID® classic-pro Installation ID CPR.M02 9. Radio Approvals ENGLISH 9.1. Europe (CE) When used according to regulation, this radio equipment conforms with the basic requirements of Article 3 and the other relevant provisions of the R&TTE Guideline 1999/E6 dated March 99. 9.2. USA (FCC) FCC ID: PJMCPRM02 This device complies with Part 15 of the FCC Rules.
OBID® classic-pro Installation ID CPR.M02 10. Technical Data • Dimensions ( W x H x D ) 50mm x 50mm x 14 mm • Connector 10 pol. Pin-Connector ENGLISH Mechanical Data Electrical Data • Supply voltage Version –B 5 V DC ± 5% • Power Consumption max. 1,5 W • Operating Frequency 13.