This product is protected by United States Federal and/or State Law, including Patent, Trademark and/or Copyright laws. Manual design and all elements of manual design are protected by U.S. Federal and/or State Law, including Patent, Trademark and/or Copyright Laws.
warranty is for one (1) year from the date of purchase from an authorized Minka-Aire dealer. This warranty is only valid to the original purchaser or user against all defects in material and workmanship (light bulbs excluded) for one (1) full year. Additionally, Minka-Aire warrants the motor only for the lifetime of the Minka Aire ceiling fan (excluding wall controls and electrical components), to the original purchaser or user.
Warranty Service Information To obtain warranty servic during the warranty period, the purchaser should return the fan with the sales receipt to the original place of purchase. The authorized Minka-Aire ® dealer, at its sole discretion, will either repair or replace the fan after verifying the legitimacy of the warranty claim. Replacement is subject to availability of the same model. If the model is unavailable it will be replaced by one of equal value.
SAFETY FIRST 1 ATTACHING THE FAN BLADES 7 PACKAGE CONTENTS 2 ATTACHING THE BOTTOM CAP AND RING 8 BEGIN INSTALLATION 3 OPERATING THE REMOTE CONTROL/WALL CONTROL 9 HANGING THE FAN 4 MAINTENANCE 10 ELECTRICAL CONNECTIONS 5 TROUBLESHOOTING 11 FINISHING THE INSTALLATION 6 SPECIFICATIONS 12 1151W.
1 SAFETY FIRST 3. 4. 5. 6. 7. 8. 9. 1. Before you begin installing the fan, shut power off at the circuit breaker of the fuse box. 2. Be cautious! Read all instructions and safety information before installing your new fan. Review accompanying assembly diagrams. Make sure that all electrical connections comply with local codes, ordinances, or National Electrical Codes. Hire a qualified electrician or consult a do-it-yourself wiring handbook if you are unfamiliar with installing electrical wiring.
NOTE:The important safeguards and instructions appearing in this manual are not meant to cover all possible conditions and situations that may occur. It must be understood that common sense, caution and care are factors which can not be built into this product. These factors must be supplied by the person (s) installing, caring for and operating the unit. NOTE: READ AND SAVE ALL INSTRUCTIONS! WARNING TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR OTHER PERSONAL INJURY.
2 PACKAGE CONTENTS 1. Fan motor/housing ass'y 2. Canopy 3. Fan blade 4. Coupling cover 5. Canopy cover 6. Hanger bracket 7. Bottom cap 8. Ring 9. Standard 6"downrod assembly 10. Minimun 3-1/2" length downrod (for close to ceiling mounting only) 11. Remote control A. Blade attachment hardware: #10-24x12mm hex screw (7pcs) B. Mounting Hardware: #8-32x38mm screw(2pcs) #10x38mm wood screw (2pcs) 3/16"(Ø5.2x8.4x1.0mm) spring washer(2pcs) Ø5x14x1mm flat washer (2pcs) C. D. E. G. H. I. 5/32"(Ø4.4x9.4x0.5-1.
BEGIN INSTALLATION Tools Required: Phillips screw driver; slotted screw driver;pliers;wire cutters; electrical tape. MOUNTING OPTIONS If there isn't an existing mounting box,then read the following instructions.Shut the power off at the circuit breaker or fuse box. NOTE: THIS CEILING FAN EXCEEDS THE MAXIMUM WEIGHT SPECIFIED BY UL FOR HANGING FROM A STANDARD OUTLET BOX. SPECIAL REINFORCEMENT OF THE CEILING IS REQUIRED FOR INSTALLATION.
4 HANGING THE FAN WARNING: All of the parts, hardware and components such as the hanger bracket and hanger ball have been provided for your safety and the proper installation of your new ceiling fan. The use of other parts, hardware or components not supplied by Minka Aire with the fan will void the Minka Aire Warranty. REMEMBER to turn off the power. Follow the steps below to hang your fan properly; Step 1: Remove the clevis pin and hitch pin from downrod assembly. (Fig.
Downrod Coupler Cover Outlet Box Canopy Hanger Ball Coupler Set Screw Hitch Pin Hanger Bracket Hitch Pin Canopy cap Washer Clevis Pin Registration Slot Lock Washer Coupling Cover Washer Blade Holder Fig.5 Downrod Clevis Pin Hanger Bracket Fig.6 Fig.8 Fig.7 Screw Downrod Fig.
5 ELECTRICAL CONNECTIONS WARNING:To avoid possible electrical shock be sure electricity is turned off at the main fuse or breaker box before wiring. Note: The Aire Control System is equipped with a learning frequency function which has 256 code combination to prevent potential interference from other remote units. The frequency on your Receiver and Transmitter units have been preset at the factory.