User's Manual

TRANSMITTER OPERATION
FAN /OFF: to turn on and turn off the fan
FOR/REV: to set the rotating direction of the fan
FAN SPEED: to set the fan speed
MODE: to set the rhythm mode, sleep mode and light delay mode
rhythm mode: the fan speed is rhythm.
sleep mode: automatic reduction of the fan speed for every half hour and finally keep the lowest level
light delay: the lighting brightness is maximum and keep 3 minutes when light delay function is on.
LIGHT DIMMER:
light on/off: toggle light key and to set the light on/off.
dimmer: press and hold the light key and to set the lighting brightness.
PRESET FUNCTION (MEMORY):
If you use the wall switch to turn off the fan, the speed and lighting level that you previously set will
remain in the remote control’s memory. The next time electricity is turned on, fan operation will
resume at the same speed and lighting level when you press the FAN or LIGHT on the remote unit.
Security code switch: set the security code to other position to avoid interference
This device complies whit Part15 of the FCC Rules.
Operation is subject to the following two conditions:
(1)This device may not cause harmful interference.
(2)This device must accept any interference received, including.
Interference that may cause undesired operation.
Model:RF7091BL-1
FCC ID:M8C
15.19 FCC Compliance Statement
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation.
15.21 Statement
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
M8CRF7091BL-1