Cut Sheet

ADD THESE OPTIONS TO
YOUR MICROSTAT
®
• Plug-in sound module, 24VDC
and 120VAC
• Flashers, 24VDC and 120VAC
• Wall mount bracket
• Plug-in LED's in five colors –
amber, blue, clear, green, or red
• Pipe extensions
• Tulip-style pipe-mount base
• UL and cUL Listed (MSLED, MSS)
MicroStat
®
Status Indicator
Optional Equipment
Models MSLBRCKT, MSLED, MSP, MSS,
MSTB
A variety of optional equipment is available for the MicroStat
®
.
MSLBRCKT
Wall mounting the MicroStat is simple with this basic bracket.
MSLED
Five plug-in LED’s are available for the MicroStat; amber, blue,
clear, green, or red. The MSLED replaces the lamp in any MSL
light module. These surface mount printed circuit board lamp
simulators represent the state of the art in LED technology.
MSLED modules are UL Listed.
MSP
Some applications require that the status indicators be raised
above the machine surface. Using powder coated steel pipe
extensions helps improve the visibility of the MicroStat. Three
different lengths are available for the MicroStat. They measure
4-inches (MSP-4), 16-inches (MSP-16) and 32-inches(MSP-32).
MSS
Adding sound to the MicroStat is simple with the plug-in Sound
Module. The Sound Module produces 83-85dB
@ 10’. This compact
piezo device replaces the lamp in the top position of any MicroStat.
A slotted opaque lens protects the sound module circuit and permits
the sound to be heard at maximum levels. Adding the sound module
to the MicroStat changes the Type rating from 4X to Type 1.
Sound modules are available in 24VDC and 120VAC operating voltages.
MSTB
The MicroStat base can be pipe-mounted or surface-mounted.
When using the pipe extensions the Tulip Base is required for a
true surface mount.
FLASHERS
Flashers for the MicroStat are available in 24VDC and 120VAC.
Each flash at 75 fpm.
FEDERAL SIGNAL CORPORATION
5
yr
5
5
5
5
y
W
A
R
R
A
N
T
Y
007_122_62362_FedSig.qxd 1/26/08 6:48 PM Page 16