Operating Instructions

FedEx ID Node
Product Overview
Model/HVIN: FedEx ID Node 2
The TRON ID Node is an environmental and location device designed to operate with packages and
containers in the transportation network. The device communicates via low power (+4dBm)
Bluetooth (2.4 GHz) that operates with the spectrum safe for aircraft and multi-modal
transportation.
There are no manual operations required for the use of the device.
Product Certifications
Environmental Handling
The FedEx ID Node does not require specific disposal guidelines as it is powered by an exempted
button cell battery.
In California, packages that contain CR lithium coin cells and the Owners/Operating Instructions of
products that contain CR lithium coin cells must include the following statement: “Perchlorate
Material – special handling may apply, See www.dtsc.ca.gov/hazardouswaste/perchorate”. The
effective date for this Perchlorate label was July 1, 2006 for non-consumer products and January 1,
2007 for consumer products.
FCC ID
2AKUXID2
This device complies with Part 15 of the FCC Rules. Operation is subject to the condition that
this device does not cause harmful interference.
FCC Caution: To assure continue compliance any changes or modifications not expressly
approved by the party responsible for compliance could void the user’s authority to operate
the equipment. All wireless devices are sensitive to interference, which can impart the
functionality of the device.
ISED Canada
IC ID: 22325-ID2 | In Compliance with CAN ICES-3 (B)/NMB-3(B)
This device complies with Industry Canada’s licence-exempt RSSs. Operation is subject to the
following two conditions:
(1) This device may not cause interference; and
(2) This device must accept any interference, including interference that may cause
undesired operation of the device.”
Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio
exempts de licence. L’exploitation est autorisée aux deux conditions suivantes :
1) l’appareil ne doit pas produire de brouillage;
2) l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est
susceptible d’en compromettre le fonctionnement.
Unintentional
Radiators | SAR
Compliance
(FCC/ISED/RED/JP RF)
2.4Ghz – BLE
In order to comply with FCC / ISED / RED / Japan RF Exposure requirements, this device must
be installed to provide at least 20 cm separation from the human body at all times.
“Afin de se conformer aux exigences d'exposition RF FCC / ISED / RED / JAPAN, cet appareil
doit être installé pour fournir au moins 20 cm de séparation du corps humain en tout temps.“
Battery/Power
Management
CR2032 – EN12005-A
Product is protected under US Patent for additional information visit
www.senseaware.com/Legal/patent