Getting Started Guide

ManualsBrandsFeasycom ManualsElectronicsBluetooth Beacon



1



,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,



FeasyBeacon Getting Started Guide

Version2.8

FeasycomOnlineTechnicalSupport:

Skype:FeasycomTechnicalSupport

DirectTel:08675523062695

Email:support@feasycom.com



Summary of content (10 pages)

PAGE 1
,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,, FeasyBeacon Getting Started Guide Version 2.8 Feasycom Online Technical Support: Skype: Feasycom Technical Support Direct Tel: 086 755 23062695 Email: support@feasycom.
PAGE 2
1. Product Introduction FeasyBeacons are designed by Shenzhen Feasycom Technology Co., Ltd which has the typical models as below showing: Model FSC‐BP103 Chipset TI CC2640R2F Bluetooth Version V5.0 Size (L*W*H mm) 33.8*37.8*7.9 Battery Type CR2032 Battery Life (at 1300ms,0dBm) 1 year Max Work Range Up to 80m LED YES Motion sensor Optional Buzzer Optional Button YES Beacon Broadcast Up to 10 slots Beacon Protocol iBeacon/Eddystone/AltBeacon Support System IOS7.0+, Android4.
PAGE 3
2. How to start FeasyBeacon 2.1 Power supply FSC‐BP103 Power on: Long press central area,the light flash 3 times Power off: Long press central area,the light keep on then off Figure 1 2.2 Download FeasyBeacon APP ‘’FeasyBeacon’’ APP is available on Apple APP Store and Google Play Store. Before using the beacon, please install the APP first. 2.3 Set FeasyBeacon Parameters ① Open FeasyBeacon APP, in the FeasyBeacon “Beacon” interface, you can see the beacons nearby.
PAGE 4
③ Input the default password: 000000. (as Figure 4, Figure 5) Figure 4 Figure 5 ④ After connected successfully, you can configure the beacon parameters or add new broadcasts, click “Save” after finished. (as Figure 6, Figure 7) 11 10 8 1 2 9 3 4 5 6 7 Figure 6 Figure7 1> Change the device name 2>Change the device password, where it shows Pin. 3>Interval: Set the beacon broadcast interval in milliseconds. 4>TxPower: This value decides the work distance.
PAGE 5
Remarks: (BP109 already with the best work condition, no need to set the TxPower) 5>Delete the beacon broadcast 6>Set the beacon broadcast parameters 7>“Add Beacon”: Add a new broadcast 8>Choose the beacon “broadcast type” 9>Fill in the beacon broadcast parameters 10>Click “Add” to Finish 11>Click “Save” .(Save the new added broadcast of the beacon) ⑤ The added broadcast will show in the beacon interface list. ⑥ When the beacon has a button or G‐sensor, there will be G‐sensor and Key options in the app.
PAGE 6
1 2 3 5 4 Figure 8 3. Beacon broadcast setting 3.1 How to set Eddystone‐URL to Beacon device Follow the steps below to add a new URL broadcast.
PAGE 7
5 3 8 4 6 Figure 9 Figure 10 Figure 11 ① Open FeasyBeacon app and connect to the beacon device ② Add a new broadcast ③ Select “URL” broadcast type ④ Fill in URL and RSSI at 0m parameter ⑤ Click “Add” to Finish ⑥ Display the new added URL Broadcast ⑦ Click “Save” (Save the new added URL broadcast of the beacon) ⑧ The added beacon URL broadcast will show on Feasybeacon APP list Remarks: Enable: Circle on Right: Circle one left, disable the beacon broadcast Enable the beacon broadcast.
PAGE 8
3.
PAGE 9
4. Forget password If miss the password, you can access the beacon with the default password (000000) within 1 minute of repower‐on the beacon. Please follow the steps below: 4.1 Re‐power the Beacon device 4.2 Enter FeasyBeacon APP, connect beacon device by default password (000000) in the setting interface 4.3 Change new password and save it. 5. Firmware upgrade We will keep updating the new version of FeasyBeacon APP, SDK and firmware, which will optimize the using experiences or add new functions. 6.
PAGE 10
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.