01 EN
02 EN
OPERATION GUIDE Normal connection mode: Put two AA battery into the battery slot, plug the receiver into your device and turn on it, and then turn on your microphones and enjoy it! If you find NO SOUND, please make sure : 1.There is enough power for the microphones and receiver; Power reminder: 1 2 Microphones: display in the screen Receiver: Blue:Receiver ON Red: Low Battery Power/ Charging Green:Charging finished. 2.Insert the receiver into the MIC jack, NOT the AUX jack; 3.
4 Turn ON the receiver now. (Indicator light on the bottom of receiver will flash if they pair successful) 5 Press the frequency select button to lock the pairing IMPORTANT The battery level indicator on the screen will flash when batteries are running low. You are suggested to replace batteries for good performance. Remember to turn off the receiver before you plug it in your audio equipment. Do remember to take off the batteries when finish using.
SYSTEM PARAMETERS Handheld Microphone Transmitter Frequency range: 902-928 Mhz (Optional) Channel: 40 Capsule: Cardioid Oscillation mode: DSP chip frequency locking Frequency stability:±10ppm RF output power: 10mW Working Range:80m Frequency Res.: 40-18000 Hz Distortion: ≤0.5% Battery type: 2 AA Mini Receiver Frequency range: 902-928 Mhz(Optional) Channel: 40 Oscillation mode: DSP chip frequency fixed Rate stability: ±10 ppm Receive sensitivity: -95 ~ -71 dBm Frequency Res.: 40-18000 Hz Distortion: ≤0.
WARRANTY Fduce, backed with over 10 years experiences in microphones and audio accessories, aims to provide cost-efficient and high-quality delicate products to our dear Amazon buyers. To ensure your complete and excellent service, we strive to give our customers, we have: Amazon service For 30 days after purchase date, if you are not satisfied with our products, you can contact the Amazon service and then return your undamaged Fduce products and receive a refund.