BMX Smart Keypad Specifications faytech Smart Keypad – Specifications 1
Table of Contents 1 Mechanical specifications ................................................................................................. 3 2 Product Picture ................................................................................................................. 6 2.1 Front panel ................................................................................................................ 6 2.2 Color chart .....................................................................................
● Length: 157 mm ● Height: 30 mm ● Width: 80 mm ● Surface treatment: Sample: black painting, matte, RAL9004 Later mold (New UL Plastic Spec.): New raw material from ABS+PC to ASA S-170 LT Grey 50283UV, which has better performance than current material on resistive UV/Sunlight, etc.
New Protection Film faytech Smart Keypad – Specifications 4
faytech Smart Keypad – Specifications 5
2 Product Picture 2.1 Front panel Screen print 2.
Note: (sample 05) 3 Electrical specifications There are two variants: one powered by Power-over-Ethernet (PoE) and the other is powered by 12VDC faytech Smart Keypad – Specifications 7
3.1 DC characteristics 3.1.1 PoE variant ● Power via Ethernet according to IEEE802.3af/at/bt ● PoE class 3, up to 12.95W ● DC voltage range (PoE): 36-57 VDC ● DC maximum current (PoE): 400 mA ● Average power consumption: 2.5W 3.1.2 12VDC variant ● DC voltage range: 10-14 VDC ● DC maximum current: 1A ● Average power consumption: 2.5W 3.2 Ethernet 10/100MBit Ethernet according to IEEE802.3u, 10BaseT/100BaseT via proprietary cable with standard RJ-45 connector. 3.3 WiFi ● Wifi according to IEEE802.
3.5 Switched output (relay) ● Maximum switched power: 60W or 62.5VA ● Maximum switched current: 2A ● Maximum switched voltage: 30VDC or 250VAC ● Minimum operations: 100000 ● Surge voltage: 1.5kV 3.6 Sound output ● Mono sound output: 16bit, 48kHz, 0.6W 3.7 CMOS Camera ● Native resolution: 2592 x 1944 ● ¼ “ sensor, 1.
5 System specifications 5.1 Processor, RAM ● NXP I.MX6ULL ARM Cortex A7 single core CPU ● Frequency up to 900MHz ● 512MByte DDR3 DRAM 5.2 Storage ● eMMC, soldered BGA, 4 GByte 6 Cable Specification 6.
● M10 7PIN AIO (3pin Relay, 4pin POE)—Internal 6.
faytech Smart Keypad – Specifications 12
6.3 Cable variations: TBD Note: each variation request MOQ 500pcs.
Screws: M3 for Smartkeypad M4 for Keylocker faytech Smart Keypad – Specifications 14
Wallmount Screws for Smart Keypad faytech Smart Keypad – Specifications 15
9 Packing Box design Serial Number Design: Keypad Serial Number Label Design faytech Smart Keypad – Specifications 16
Keypad Box Label Design 10 11 Cosmetic Inspection Standard • 12 FTQA-TS-033 Keypad plastic part inspect criteria(EN) Changelog • 1.9.2020 L. Felten initial version • 16.10.2020 Nathan. Lu • 19.10.2020 Nathan. Lu • 22.10.2020 Nathan. Lu • 10.11.2020 Nathan. Lu Operation temperature update from 0-60 to be -20~60 • 05.01.2021 Nathan. Lu Mechanical design update on the cable and back cover Color chart: logo color Cables changes, for both POE and KeyLocker Adding in packing • 08.03.
Surface treatment for touch panel glass and BMX Logo glass: GLARE+AR+AF Leave away surface treatment options Cutsheet drawing for keylocker cable not available, adding in actual cable picture. Adding in screw driver pictures Adding in label on box: TBD Adding in keypad label first draft, final version TBD Adding in install sticker/cardboard TBD Adding in cable variations: TBD, MOQ500pcs for each variation • 12.03.2021 Nathan.
12.1.1 FCC Radio Frequency (RF) Exposure Statement This equipment has been evaluated and to be compliant with the FCC Radio Frequency exposure limits. This equipment should be installed and operated with minimum distance of 20cm between the radiator and the person. The equipment’s transmitter must not be co- located or to be operated in conjunction with any other RF antenna or a transmitter.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) (2) This device may not cause harmful interference. This device mus accept any interference received, including interference that may cause undesired operation. Notice: The FCC regulations provide that changes or modifications not expressly approved by Faytech Tech.Co., Ltd could void the user’s authority to operate the equipment.