User’s Manual v1.0.0.0 F741-SD A/2013 www.favite.com C 2013, Favite, Inc.
F740 User Guide Table of Contents 1. Introduction ...........................................................................................................1 1.1 Overview ..........................................................................................................1 1.2 1.3 Requirement......................................................................................................1 Reference Documents.......................................................................................
F740 User Guide Tables Table 1: Reference Documents ........................................................................................ Table 2: Specification of the F741-SD............................................................................. ii C 2013, Favite, Inc v2.2.1.
F740 User Guide 1. Introduction This user’s manual guide is providing instruction for installing and operating the F741-SD RFID reader. This document is designed for use by RFID system integrators and software developer who develops relatively program and extended systems that take full advantage of the RFID Reader's capabilities. 1.1 Overview F741-SD, one of FAVITE RFID reader family, is an Intel ATOM CPU based smart reader.
F740 User Guide 1.
F740 User Guide Software Operation System Linux with SCO server General Characteristics Dimension 500mm x 245 mm x 50.49mm Weight 2.5 Kg Base Material Die-cast aluminum Mounting Wall mounting, vertical placement Power Input DC 19V +- 0.5V / 1.5A @ 33dBm Power Consumption 28.5 W (Typical) Communication USB USB2.0 Ethernet 10/100 Base-T (RJ-45) GPIO 4 digital input, 4 digital output 3 C 2013, Favite, Inc v2.2.1.
F740 User Guide Mechanical: Reader Physical Size Figure 1: F741-SD Reader Physical Size 4 C 2013, Favite, Inc v2.2.1.
F740 User Guide 5 C 2013, Favite, Inc v2.2.1.
F740 User Guide Figure 2: F741-SD Reader I/O Terminal USB2.0/ GPIO RS232 reset RJ45 FTDI com port SD card cocket power Figure 3: Antenna Port Terminal Interface Antenna1 Antenna2 Antenna3 Antenna4 power link error 6 C 2013, Favite, Inc v2.2.1.
F740 User Guide Figure 4: F741-SD GPIO Pin definition and I/O description. Pin definition D-SUB15pin V1 GPIO_O1 GPIO_O2 GPIO_I1 GPIO_I2 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 GND-1 V2 GND-2 GPIO_O3 GPIO_O4 GPIO_I3 GPIO_I4 GPIO GPIO-OUT Circuit diagram (add figure#) V2 R95 VDD3.3VGP R94 4K7/4 GPIO_OUT4 U13 1 4 2 3 UPC817 47K/6 GND-2 GPIO_O4 GPIO-IN Circuit diagram(add figure#) VDD3.3VGP R96 V2 4K7/4 GPIO_IN4 4 U14 3 GND 1 R98 C68 0.
F740 User Guide If F741-SD is going to transmit signal to other device, please connect to the device which is below 48V and 10mA. If user wants F741-SD to receive data from other device through GPIO, please connect 24V power source to PIN19 or PIN20 and connect the device output line to Pin 1~ Pin8. The development of programming of receiving data from GPIO could reference the document “FAVITE F741-SD GPIO Programming Guide_DotNet CSharp” for read data from GPIO with application method.
F740 User Guide 2. Reader Hardware Installation and Operation 2.1 Receiving the RFID Reader Your RFID Reader Kit is shipped with the items listed below. Please verify the contents of your received shipment before assembling. • RFID reader. • Power supply and cables (two sections: one attached, one detached). • CD-ROM containing demonstration software, user guides and documentation. Figure 5: F741-SD (1) 9 C 2013, Favite, Inc v2.2.1.
F740 User Guide Figure 6: F741-SD (2) Figure 7: F741-SD Power Supply and Adapter cable 10 C 2013, Favite, Inc v2.2.1.
F740 User Guide 2.2 Diagnostic LEDs The F741-SD is including diagnostic LEDs on the face of the reader to provide easy and convenient external indication for various operating conditions: POWER (green) – indicates that power is applied to the reader. Read (yellow) – indicates that the reader is receiving data from a tag. Fault (red) – indicates that a fault condition like CRC check error.
F740 User Guide Antenna Panel The antenna panel is containing four coax antenna connector ports, which is TNC connector, as shown below. These are TNC connectors. 2.3 Installation & Demonstration Software Guide Installation : First , please let F740 connect with the power cable and RJ45 network cable, then the debug and power two LEDs of front side will be blink . Until power LED still bright and debug LED slake , it can execute the tool as picture.
F740 User Guide Figure 9: Demo Program NCC Declaration: Article 12—Without permission granted by the NCC, any company, enterprise, or user is not allowed to change frequency, enhance transmitting power or alter original characteristics as well as performance of an approved low power radio-frequency device.
F740 User Guide 第十四條 低功率射頻電機之使用不得影響飛航安全及干擾合法通信;經發現有干擾現象時,應 改善至無干擾時方得繼續使用。前項合法通信,指依電信法規定作業之無線電通信。低功率射頻 電機須忍受合法通信或工業、科學及醫療用電波輻射性電機設備之干擾。 FCC Declaration: FCC statement in User’s Manual (for class B) “Federal Communications Commission(FCC) Statement” This Equipment has been tested and found to comply with the limits for a class B digital device, pursuant to Part 15 of the FCC rules. These Limits are designed to provide reasonable protection against harmful interference in a residential installation.
F740 User Guide that may cause undesired operation. 2. This device and its antenna(s) must not be co‐located or operating in conjunction with any other antenna or transmitter. 3. Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user authority to operate the equipment. FCC Radiation Exposure Statement: 1. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. 2.