Data Sheet

ManualsBrandsFasttag ManualsElectronicsFastChecker FC01

FASTCHECKER FC01 DATASHEET

FASTCHECKER FC01 is a laboratory instrument for evaluating the performance of a UHF tag. It

provides important information that is hidden when using a conventional UHF reader.

The FASTCHECKER FC01 is not a traditional RFID reader. It does not perform the functions of a

reader and thus cannot operate as such.

It serves to make tag performance comparisons when applied to different products delivering results

across a limited band of 902-928 MHz frequency spectrum. This shows whether the tag is at its

maximum sensitivity within the range that a traditional reader will work out. This cannot be evaluated

using a traditional reader - this is the main function of FASTCHECKER FC01.

Easy to connect via a USB cable, its operation is very simple via a computer using the FASTCHECKER

FC01 control software.

Product Marketing

The FASTCHECKER FC01 was developed and is marketed by MB Engenharia (Michel Normanha

Bardauil ME) www.mb-engenharia.com through the site www.getfasttag.com. Sales are given to UHF

RFID companies and RFID professionals.

What are included



FASTCHEKER FC01 unit

 Wideband Dipole Antenna



USB Cable



Flash Drive with Fastchecker Software (FC01 so ftware)



10 dB Attenuator

Highlights

•Compactsize

• Frequency coverage from 800 to 1000 MHz or from 840 MHz to 960 MHz

• Self-Licensing Function

• Powered by USB port

• RoHs compatible (lead free and other harmful components)

• Antenna Check

• Thermal protection

• Shows the power to reach the operating threshold for each frequency.

• Test plan setup - manually set maximum power and start and end frequencies

• Auto function saves the test data

• Maximum 50% duty cycle during testing

Summary of content (4 pages)

PAGE 1
FASTCHECKER FC01 DATASHEET: FASTCHECKER FC01 is a laboratory instrument for evaluating the performance of a UHF tag. It provides important information that is hidden when using a conventional UHF reader. The FASTCHECKER FC01 is not a traditional RFID reader. It does not perform the functions of a reader and thus cannot operate as such. It serves to make tag performance comparisons when applied to different products delivering results across a limited band of 902-928 MHz frequency spectrum.
PAGE 2
Product Operation For each frequency from 902-928 MHz in 0.25, 1, 5 or 10 MHz jumps it determines the minimum power required for full conversation between the FASTCHECKER FC01 and the tag using the EPC C1G2 / ISO18000-6C communication protocol. As an example, the figure below shows the result of the analysis of 3 different tags by FASTCHECKER FC01. The graphs show the minimum power required to access the tag (threshold) as well as the backscattered power value of each of the measurements taken.
PAGE 3
Environmental IP Rating IP54 ‐ Protected from limited dust ingress. Protected from water spray from any direction. Drop Test No damage after 10 free falls at 1m high on a carpet floor. Applicable to the product without its antenna and cable.
PAGE 4
FCC STATEMENT : This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.